|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source | Mark Forums Read |
| LinkBack | Thread Tools | Display Modes |
02-24-2011, 13:16 | #1 (permalink) |
Registered User Join Date: Aug 2010
Posts: 497
Member: 1359163 Status: Offline Thanks Meter: 37 | AnyCool NOR 6205-6239 read flash problem but after that Language Package Editor dont find any language When I try to read full flash or firmware with Boot autodetect autoselect on/off and Page + Spare . I have log: COM5 [VCP0] selected module v3.26 Device: Autodetect 6205-6239 NOR Checking data, wait... advanced flash detection enabled Action: read flash ====> Boot ... Press and HOLD Power button now ! 19200 fixed Connecting, wait... Initializing [6235:8A04:8A01]... CPU: MT6235 high speed boot On chip: 0000:0000:0003 status: FF boot packet size: 0400 Release Power button now ! in case of initial connection problem: on/off "Boot baudrate autoselect" Boot Fail Finished, time used: 32 sec Remove/Install battery now ! any solution to read firmware with language to change it ? |
The Following User Says Thank You to konaku For This Useful Post: |
02-26-2011, 10:36 | #4 (permalink) |
Registered User Join Date: Aug 2010
Posts: 497
Member: 1359163 Status: Offline Thanks Meter: 37 | NOW I HAVE : COM5 [VCP0] selected module v3.26 Device: Autodetect 6228-6253 NAND Checking data, wait... Action: write flash NAND write: Firmware AnyCool 72% PL editor_corrected_AnyCool to polish 3180_PCB01_GPRS_MT6235B_S01.ZZT_3180WP04_5_5T10D10 0930_MB01__firmware_20110225-193341.B4M.bin.B4M.bin skip: Customization/Language Pack skip: Customization skip: Eeprom/ffs nfi area detection... nfi scat area detected (3 areas) nfi area detection (3 cores) finished: Ok interface: BROM_DLL_v3.1016.00 Connect... Phone should be Switched OFF ! Press and HOLD Power button now ! Connecting... Booting... Release Power button now ! bootcode current/expected: 3.2/3.2 CPU: 6235:8A04:8A01 status: FF bbchip bl ver: FE NOR flash chip: not installed NAND flash id[0018]: 00AD:007900A50000 [HYNIX] HY27XA081G1M chip size: 128Mb page/spare size: 0200/0010 pages per block: 0020 bits i/o: 08 address cycles: 04 internal RAM size: 00010000 external RAM: S_DA_RAM_ERROR done Set baudrate (460800)... done ram test... testing... ram test passed ===> detect existing firmware structure... detect ffs... ffs offset/size: 02000000/06000000 firmware size: 32Mb ffs size: 96Mb detect sec ro... detect custom parameters... detect project-id... project-id: ZZT.3180WP04.5.5T10D100930_MB01 detect NAND info... number of areas/bytes to read: 1:00034000 reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)... nfi area detection... bootloader version: 3180_BOOTLOADER_V005_MT6235B_ZZT_3180WP04_5_5T10D1 00930_MB01.bin nfi area detection (3 cores) finished: Ok warning: ffs can not be detected TCL-ID detection... TCL-ID detection done startup code area #1 detection... number of areas/bytes to read: 1:00004000 reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)... number of areas/bytes to read: 1:00004000 reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)... error: unexpected answer: startup code area #1 is valid startup code area #1 detection done rom info ver: 07 sw version: 3180_PCB01_GPRS_MT6235B_S01.ZZT_3180WP04_5_5T10D10 0930_MB01.BIN project-id: ZZT.3180WP04.5.5T10D100930_MB01, 9CED6B5D code offset: 00000000 rom info structure: [protected] type (07), 1 record(s) TCL-ID is absent ===> done nfi area detection... nfi scat area detected (3 areas) nfi area detection (3 cores) finished: Ok startup code area #1 check... rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235.[3180_PCB01_GPRS_MT6235B_S01.ZZT_3180WP04_5_5T10D10 0930_MB01.BIN_5D6BED9C].rpl rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235._3180 _PCB01_GPRS_MT6235B_S01.ZZT_3180WP04_5_5T10D100930 _MB01.BIN_5D6BED9C_.rpl rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.00006235.[3180_PCB01_GPRS_MT6235B_S01.ZZT_3180WP04_5_5T10D10 0930_MB01.BIN_5D6BED9C].rpl rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.00006235._3180_PCB01_GPRS_MT6235B_S01.ZZT_3180WP 04_5_5T10D100930_MB01.BIN_5D6BED9C_.rpl ==================== warning: unknown firmware: 3180_PCB01_GPRS_MT6235B_S01.ZZT_3180WP04_5_5T10D10 0930_MB01.BIN_5D6BED9C Unknown firmware found (v.3.26, database date: 13.01.2011), user action required: 1. download latest software from support area and try again 2. if no still luck follow the next procedure: - find good working phone with the same firmware: 3180_PCB01_GPRS_MT6235B_S01.ZZT_3180WP04_5_5T10D10 0930_MB01.BIN - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage - include in your e-mail full text from phone back label (phone name etc.) - be little bit patient and wait update ==================== error: startup code area #1 can't be fixed You can flash phone now but can not finalize it, in most cases phone CAN NOT power-on. Do you want to continue anyway ? number of cores: 3 loading files... number of areas: 3 done write... write bootloader... . . . . write core... Disconnect... done file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\3 180_PCB01_GPRS_MT6235B_S01.ZZT_3180WP04_5_5T10D100 930_MB01__system_log_20110225-204602.B4X.bin Finished, time used: 15 min 25 sec Remove/Install battery now ! now phone not power on, format safe FFS dont change power on problem how to write correctly this firmware and have full working phone ? |
02-26-2011, 13:27 | #5 (permalink) |
Junior Member Join Date: May 2008
Posts: 7
Member: 764950 Status: Offline Thanks Meter: 0 | i have same problem i have a same problem with x7 iphone clone mt6235.... here is the log COM9 [VCP1] selected module v3.26 Device: Autodetect 6228-6253 NAND Checking data, wait... Action: write flash NAND write: Firmware V101_PCB01_GPRS_MT6235B_S01.X7_101213_V1_4_QC_SET_ FOR10.BIN_FLNHYG0UGG0MF1P_5SH0E__fullflash_2011022 6-194930.B4M.bin skip: Customization/Language Pack skip: Customization skip: Eeprom/ffs nfi area detection... converting data... done 0x07C1F200 bytes bootloader version: V101_BOOTLOADER_V005_MT6235B_X7_101213_V1_4_QC_SET _FOR10.bin nfi area detection (3 cores) finished: Ok "format ffs" active interface: BROM_DLL_v3.1016.00 Connect... Phone should be Switched OFF ! Press and HOLD Power button now ! Connecting... Booting... Release Power button now ! bootcode current/expected: 3.2/3.2 CPU: 6235:8A04:8A01 status: FF bbchip bl ver: FE NOR flash chip: not installed NAND flash id[0018]: 00AD:007900A50000 [HYNIX] HY27XA081G1M chip size: 128Mb page/spare size: 0200/0010 pages per block: 0020 bits i/o: 08 address cycles: 04 internal RAM size: 00010000 external RAM: S_DA_RAM_ERROR done Set baudrate (921600)... done ram test... testing... ram test passed ===> detect existing firmware structure... detect ffs... ffs offset/size: 03400000/04C00000 firmware size: 52Mb ffs size: 76Mb detect sec ro... detect custom parameters... detect project-id... project-id: X7_101213_V1.4_QC_SET_FOR10 detect NAND info... number of areas/bytes to read: 1:00034000 reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)... nfi area detection... bootloader version: V101_BOOTLOADER_V005_MT6235B_X7_101213_V1_4_QC_SET _FOR10.bin nfi area detection (3 cores) finished: Ok warning: ffs can not be detected TCL-ID detection... TCL-ID detection done startup code area #1 detection... number of areas/bytes to read: 1:00004000 reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)... number of areas/bytes to read: 1:00004000 reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)... error: unexpected answer: startup code area #1 is invalid startup code area #1 detection done rom info ver: 07 sw version: V101_PCB01_GPRS_MT6235B_S01.X7_101213_V1_4_QC_SET_ FOR10.BIN_FLNHYG0UGG0MF1P_5SH0E project-id: X7_101213_V1.4_QC_SET_FOR10, 71F9FB49 code offset: 00000000 rom info structure: [protected] type (07), 1 record(s) TCL-ID is absent ===> done nfi area detection... converting data... done 0x07C1F200 bytes bootloader version: V101_BOOTLOADER_V005_MT6235B_X7_101213_V1_4_QC_SET _FOR10.bin nfi area detection (3 cores) finished: Ok startup code area #1 check... rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235.[V101_PCB01_GPRS_MT6235B_S01.X7_101213_V1_4_QC_SET_ FOR10.BIN_FLNHYG0UGG0MF1P_5SH0E_49FBF971].rpl rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235._V101 _PCB01_GPRS_MT6235B_S01.X7_101213_V1_4_QC_SET_FOR1 0.BIN_FLNHYG0UGG0MF1P_5SH0E_49FBF971_.rpl rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.00006235.[V101_PCB01_GPRS_MT6235B_S01.X7_101213_V1_4_QC_SET_ FOR10.BIN_FLNHYG0UGG0MF1P_5SH0E_49FBF971].rpl rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.00006235._V101_PCB01_GPRS_MT6235B_S01.X7_101213_ V1_4_QC_SET_FOR10.BIN_FLNHYG0UGG0MF1P_5SH0E_49FBF9 71_.rpl ==================== warning: unknown firmware: V101_PCB01_GPRS_MT6235B_S01.X7_101213_V1_4_QC_SET_ FOR10.BIN_FLNHYG0UGG0MF1P_5SH0E_49FBF971 Unknown firmware found (v.3.26, database date: 13.01.2011), user action required: 1. download latest software from support area and try again 2. if no still luck follow the next procedure: - find good working phone with the same firmware: V101_PCB01_GPRS_MT6235B_S01.X7_101213_V1_4_QC_SET_ FOR10.BIN_FLNHYG0UGG0MF1P_5SH0E - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage - include in your e-mail full text from phone back label (phone name etc.) - be little bit patient and wait update ==================== error: startup code area #1 can't be fixed You can flash phone now but can not finalize it, in most cases phone CAN NOT power-on. Do you want to continue anyway ? number of cores: 3 loading files... number of areas: 3 done write... write bootloader... . . write core... warning: can not format: HW_STORAGE_NOR is not present Format... Disconnect... done Finished, time used: 16 min 16 sec Remove/Install battery now ! please help |
02-27-2011, 08:05 | #8 (permalink) |
Product Supporter Join Date: Jun 2009 Location: private
Posts: 36,458
Member: 1043909 Status: Offline Thanks Meter: 60,926 | @ays_babes2 send original flash backup files to [email protected] and in 1 day you will be able to flash your phones |
03-01-2011, 04:08 | #10 (permalink) |
Registered User Join Date: Aug 2010
Posts: 497
Member: 1359163 Status: Offline Thanks Meter: 37 | |
03-01-2011, 20:16 | #12 (permalink) | |
Registered User Join Date: Aug 2010
Posts: 497
Member: 1359163 Status: Offline Thanks Meter: 37 | Quote:
http://rapidshare.com/files/45045840...ware_20110225- best regards | |
03-01-2011, 22:59 | #13 (permalink) |
Product Manager Join Date: Mar 2005 Location: infinity-box
Posts: 38,635
Member: 130995 Status: Offline Thanks Meter: 35,227 | @konaku Are you sure that it's ORIGINAL file (from good working phone) ? I can not extract required data from this file, I think that it's not original file, or file that was read from phone with VERY old ChineseMiracle software version |
03-02-2011, 00:34 | #14 (permalink) |
Major Poster Join Date: Jul 2001
Posts: 42
Member: 5288 Status: Offline Thanks Meter: 0 | take file and write by Flashtool. your phone will be restored http://rapidshare.com/files/45049332...00930_MB01.rar |
03-02-2011, 07:37 | #15 (permalink) | |
Registered User Join Date: Aug 2010
Posts: 497
Member: 1359163 Status: Offline Thanks Meter: 37 | Quote:
write flash to phone , when I change language to othere , and try to write it I in new language I have many of squares rather than letters. So take a look at this firmware http://rapidshare.com/files/45046797...D_BQ12__firmwa | |
Bookmarks |
Thread Tools | |
Display Modes | |
| |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Seeking for flash nokia 5110 old version (3 version) can exchange for new | Tomas | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 8 | 10-14-2017 19:29 |
5110 flash new software , need help | steve | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 4 | 01-03-2015 05:41 |
Eeprom reading | KLImax | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 2 | 09-22-2011 15:55 |
|