set boot configuratin on qualcmm phone - GSM-Forum

manan-hanan · 09-03-2018, 22:22

hi to any one
i want to replace emmc from g620-ul01 and i have readed fw form this phone.

my emmc is new and boot configuratins is not set to any partitions and not enable

if i set the new emmc ( with boot config not enable) to phone and flash it with fw readed from cm2qul my phne go power on or need to set boot config to right partition and falsh it ?

manan-hanan · 09-05-2018, 20:27

hi to avery one

infinity team what it this ((BootConfig set to 0x00))
plz explaine about that

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 400 [MSM8x26/28]
ID_BLOCK_S : 08718FEE
ID_BLOCK_L : FB0D679F3EA4D1DC8BE0107DBA811139
ID_BLOCK_L : 285BE54449D8028306F1DA13119C8AB1
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x26 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!

Flash Chain : 27
Flashing now

Flashing : gpt_main0.bin
Flashing : sbl1.mbn
Flashing : deploy.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : emmc_appsboot.mbn
Flashing : NON-HLOS.bin
Flashing : persist.img
Flashing : boot.img
Flashing : recovery.img
Flashing : cust.img
Flashing : cache.img
Flashing : misc.img
Flashing : system.img
Flashing : userdata.img
Flashing : gpt_backup0.bin
Wipe data ...

BootConfig set to 0x00

Flashing done!

kamal_singla · 09-06-2018, 03:19

Better you have to check in any jtag section for help

09-03-2018, 22:22	#1 (permalink)
manan-hanan Insane Poster Join Date: Feb 2009 Posts: 82 Member: 976682 Status: Offline Thanks Meter: 5	set boot configuratin on qualcmm phone hi to any one i want to replace emmc from g620-ul01 and i have readed fw form this phone. my emmc is new and boot configuratins is not set to any partitions and not enable if i set the new emmc ( with boot config not enable) to phone and flash it with fw readed from cm2qul my phne go power on or need to set boot config to right partition and falsh it ?

09-05-2018, 20:27	#2 (permalink)
manan-hanan Insane Poster Join Date: Feb 2009 Posts: 82 Member: 976682 Status: Offline Thanks Meter: 5	hi to avery one infinity team what it this ((BootConfig set to 0x00)) plz explaine about that 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_I : SnapDragon 400 [MSM8x26/28] ID_BLOCK_S : 08718FEE ID_BLOCK_L : FB0D679F3EA4D1DC8BE0107DBA811139 ID_BLOCK_L : 285BE54449D8028306F1DA13119C8AB1 Pickup loader from firmware package Loader Sent! Initializing ... Running FireHose on BBID : MSM8x26 , FLASH : eMMC , mVER : 1 ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000 Boot Ok! Flash Chain : 27 Flashing now Flashing : gpt_main0.bin Flashing : sbl1.mbn Flashing : deploy.mbn Flashing : rpm.mbn Flashing : tz.mbn Flashing : emmc_appsboot.mbn Flashing : NON-HLOS.bin Flashing : persist.img Flashing : boot.img Flashing : recovery.img Flashing : cust.img Flashing : cache.img Flashing : misc.img Flashing : system.img Flashing : userdata.img Flashing : gpt_backup0.bin Wipe data ... BootConfig set to 0x00 Flashing done!

09-06-2018, 03:19	#3 (permalink)
kamal_singla Product Supporter Join Date: Jun 2014 Location: India Posts: 5,063 Member: 2211790 Status: Offline Thanks Meter: 5,118	Better you have to check in any jtag section for help