AVVerify : Too much data! Break! Send report to support - GSM-Forum

.::GEANECIV::. · 02-13-2016, 14:21

Hi team, please fix this report. Thanks

Card found : S/N : xxxxxxxx , vxxxx
Chinese Miracle II [MTK module] v 1.40

Operation : Remove Viruses [SmartAV] [ v1.40 ]
SmartAV Conf : 100/80/2000

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053454D303447288286F578B05F
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D303447288286F578B05F
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

SmartAV Init Ok!
Scanning FileSystem now , please wait
Scan Done, infected files found : 114
AVVerify : Too much data! Break! Send report to support

Error! Check previous message for more info!
Check battery, cable, charge! Before try again, check result!

Operation Failed
Elapsed: 00:00:37
Reconnect Power/Cable!

JayDi · 02-13-2016, 14:36

Hello.
Settings.ini - all can be found inside
or use AppManager.

PASSIONATE_BOYS · 02-13-2016, 14:46

Hello,
Use App manager or change Av setting to higher value in settings.ini in C:\InfinityBox\CM2MTK

Br.
Infinity Box Support Team.

.::GEANECIV::. · 02-13-2016, 15:29

Thank You Very Much........

SkyNet4u · 10-08-2016, 10:40

Quote:

Originally Posted by JayDi

Settings.ini - all can be found inside
or use AppManager.

Quote:

Originally Posted by PASSIONATE_BOYS

Use App manager or change Av setting to higher value in settings.ini in C:\InfinityBox\CM2MTK

sorry for posting in old thread
faced same problem with lava iris x8 and solved after edit settings.ini

info :

Code:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 45 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 150100523832314D42009F7CD6F132C3
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM128
[eMMC] : FLASH_CID : 150100523832314D42009F7CD6F132C3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xADCBF0BF365787E77A45029235926226
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : iris
ProdName  : X8
ProdModel : irisX8
Device    : irisX8
AndroidVer: 4.4.2
MTKxCPU   : MT6592
MTKxPRJ   : Lava_irisx8_S016_20150313

EXTRA : 
LCD [0] : ili9881_dsi_hd720_txd_aw809
LCD [1] : otm1283_hd720_trust_aw809
LCD [2] : nt35521_hd720_dijin_aw809
LCD Res : 1280x720
TOUCH [0] : ft6436l_aw809
TOUCH [1] : msg2238a_aw809
TOUCH [2] : GT9XX_ZAW809#S7020
TOUCH [3] : #GT9XX
CAM [0] : ov8865_mipi_raw_aw809
CAM [1] : s5k4h5yx_mipi_raw_aw809
CAM [2] : ov8858_mipi_raw_aw809
CAM [3] : ov2680_mipi_raw_aw809
CAM [4] : gc2355_mipi_raw_aw809
MODEM : aw809_zaw809aa_md1_hspa_gemini_g4w1_w2100 #change modem for sim reverse
LOCALE : en_US es_ES zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG th_TH pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR hi_IN xhdpi

Done!
Elapsed: 00:00:09
Reconnect Power/Cable!

smart av with original setting :

Code:

Start  at : [08/10/2016 / 2:51:12 PM]
Operation : Remove Viruses [SmartAV] [ v1.56 ]
SmartAV Conf : 100/80/2000

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 45 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 150100523832314D42009F7CD6F132C3
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM128
[eMMC] : FLASH_CID : 150100523832314D42009F7CD6F132C3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xADCBF0BF365787E77A45029235926226
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

SmartAV Init Ok!
Scanning FileSystem now , please wait
Scan Done, infected files found : 120
AVVerify : Too much data! Break! Send report to support

Error! Check previous message for more info!
Check battery, cable, charge! Before try again, check result!


Operation Failed
Elapsed: 00:01:05
Reconnect Power/Cable!

smart av after edit settings.ini :

Code:

Operation : Remove Viruses [SmartAV] [ v1.56 ]
SmartAV Conf : 150/80/2000

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 45 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 150100523832314D42009F7CD6F132C3
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM128
[eMMC] : FLASH_CID : 150100523832314D42009F7CD6F132C3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xADCBF0BF365787E77A45029235926226
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

SmartAV Init Ok!
Scanning FileSystem now , please wait
Scan Done, infected files found : 120
Removing infected files and scripts ... 

SmartAV Report : Removed 120 infected files!

Making additional operations ... 
Special Op #1 : Clear Recovery Data Ok!
Special Op #2 : Clear UserData Ok!
Special Op #3 : PostFix Ok!

Done!

Done!
Elapsed: 00:02:30
Reconnect Power/Cable!

app manager :

Code:

Operation : Scan APPs [DDirect] [ v1.56 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 45 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 150100523832314D42009F7CD6F132C3
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM128
[eMMC] : FLASH_CID : 150100523832314D42009F7CD6F132C3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xADCBF0BF365787E77A45029235926226
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

DDirect : Init Ok!
Scanning FileSystem now , please wait
Collect and verify data according Dictionary
Collect done : 0x0001
[DDCleaner Info] : Files to remove : 1
[DDCleaner Info] : Additional garbage detected : 0
Removing files ...
[DDCleaner] : Removed 1

Special Op #1 : Clear Recovery Data Ok!
Special Op #2 : Clear UserData Ok!
Special Op #3 : PostFix Ok!
All Done!


Done!
Elapsed: 00:01:16
Reconnect Power/Cable!

02-13-2016, 14:21	#1 (permalink)
.::GEANECIV::. Freak Poster Join Date: Sep 2008 Posts: 235 Member: 853097 Status: Offline Sonork: 100.1622287 Thanks Meter: 131	AVVerify : Too much data! Break! Send report to support Hi team, please fix this report. Thanks Card found : S/N : xxxxxxxx , vxxxx Chinese Miracle II [MTK module] v 1.40 Operation : Remove Viruses [SmartAV] [ v1.40 ] SmartAV Conf : 100/80/2000 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 8 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6572 BB_CPU_HW : CA01 BB_CPU_SW : 8A00 BB_CPU_SB : 0000 BB_CPU_NM : [MediaTek] MT6572_S00 Processing BROM stage BLVersion : 0x01 SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Ver : MTK_AllInOne_DA_v5.1540.01.01 NAND_ID : 00000000000000000000000000000000 eMMC_ID : 45010053454D303447288286F578B05F DA Stat : v4.2 on BBID : 0x88 DA Sent. Configure setting now ... DA started successuflly eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0045 , OEM : 0100 [eMMC] : FLASH_INF : [SANDISK] , G40ME [eMMC] : FLASH_CID : 45010053454D303447288286F578B05F [eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00200000 [eMMC] : FLASH_LEN : 0x00000000EC000000 [eMMC] : FLASH_UCP : 3776 MiB INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! SmartAV Init Ok! Scanning FileSystem now , please wait Scan Done, infected files found : 114 AVVerify : Too much data! Break! Send report to support Error! Check previous message for more info! Check battery, cable, charge! Before try again, check result! Operation Failed Elapsed: 00:00:37 Reconnect Power/Cable!

02-13-2016, 14:36	#2 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Hello. Settings.ini - all can be found inside or use AppManager.

02-13-2016, 14:46	#3 (permalink)
PASSIONATE_BOYS No Life Poster Join Date: Jul 2007 Location: Infinity-Box Support- Posts: 9,321 Member: 541591 Status: Offline Sonork: 100.1611509 Thanks Meter: 7,361	Hello, Use App manager or change Av setting to higher value in settings.ini in C:\InfinityBox\CM2MTK Br. Infinity Box Support Team.

02-13-2016, 15:29	#4 (permalink)
.::GEANECIV::. Freak Poster Join Date: Sep 2008 Posts: 235 Member: 853097 Status: Offline Sonork: 100.1622287 Thanks Meter: 131	Thank You Very Much........