|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
| |||||||
| Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
 |
| | LinkBack | Thread Tools | Display Modes |
07-05-2011, 04:23
| #1 (permalink) |
| Freak Poster  Join Date: Dec 2010
Posts: 268
Member: 1463928 Status: Offline Thanks Meter: 11 |  Big problem!!! Can't get conected COM13 [VCP0] selected module v3.96 Device: _Autodetect MT6205-6239 NOR Checking data, wait... advanced flash detection enabled Action: read/check information ====> Boot ... Press and HOLD Power button now ! error: boot initialization step #2 failed: 5F error: boot initialization step #2 failed: 5F error: boot initialization step #3 failed: 00 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: 80 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #3 failed: 00 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #3 failed: 00 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #3 failed: 00 error: boot initialization step #2 failed: A0 error: boot initialization step #3 failed: 00 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #3 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #3 failed: 81 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #3 failed: 00 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: 80 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: 40 error: boot initialization step #3 failed: 00 error: boot initialization step #2 failed: 40 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #3 failed: 00 error: boot initialization step #3 failed: 00 error: boot initialization step #2 failed: A0 error: boot initialization step #3 failed: 00 error: boot initialization step #2 failed: A0 error: boot initialization step #3 failed: 00 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #3 failed: 00 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 error: boot initialization step #2 failed: A0 19200 fixed Connecting, wait... error: can't detect CPU id Release Power button now ! in case of initial connection problem: on/off "Boot baudrate autoselect" Boot Fail Finished, time used: 4 sec Remove/Install battery now ! |
 |
|
07-05-2011, 21:26
| #3 (permalink) |
| Freak Poster Join Date: Dec 2010
Posts: 268
Member: 1463928 Status: Offline Thanks Meter: 11 | Hi, yes: software version: 1.26 platform: MT: MT6205, MT6217-MT6253 cable type: 1x12 (L12C) mode: Slow Fast searching adapter at COM13 (115200)... adapter found, version: 4000 Loading platforms configuration... Initializing platforms... Press and HOLD phone Power button now ! pins: 12, plain activation bytes/cycles: 2/2 detecting pins... detecting... result: Rx:4 Tx:6 time required: 1 sec Trying to Power-On... Power is On Here with phone right now  |
| |
|
07-05-2011, 21:38
| #5 (permalink) |
| Freak Poster Join Date: Dec 2010
Posts: 268
Member: 1463928 Status: Offline Thanks Meter: 11 | WOOOOOOOOOOOOOOOOOOOOOOOW! I think this was the problem. Look Now! software version: 1.26 platform: MT: MT6205, MT6217-MT6253 cable type: 1x12 (L12C) mode: Slow Fast searching adapter at COM13 (115200)... too many retries adapter found, version: 4000 Loading platforms configuration... Initializing platforms... Press and HOLD phone Power button now ! pins: 12, plain power/activation cycles: 1/7 power-off delay: 20 start Rx/Tx: 1/1 detecting pins... error: boot initialization step #2 failed: 5F 19200 fixed CPU: MT6253 result: Rx:7 Tx:6 time required: 27 sec Trying to Power-On... Power is On Will try again read full details :P |
| |
|
07-05-2011, 21:40
| #6 (permalink) |
| Freak Poster Join Date: Dec 2010
Posts: 268
Member: 1463928 Status: Offline Thanks Meter: 11 | Check this now! COM13 [VCP0] selected module v3.96 Device: _Autodetect MT6253 NOR Checking data, wait... advanced flash detection disabled Action: read/check information ====> Boot ... Press and HOLD Power button now ! 19200 fixed Connecting, wait... Initializing [6253:8A02:8A00]... CPU: MT6253 high speed boot On chip: 0000:0000:000F status: FF boot packet size: 0400 Release Power button now ! in case of initial connection problem: on/off "Boot baudrate autoselect" Boot Fail Finished, time used: 11 sec Remove/Install battery now ! What can i do? THanks!! |
| |
|
07-05-2011, 21:46
| #7 (permalink) |
| Freak Poster Join Date: Dec 2010
Posts: 268
Member: 1463928 Status: Offline Thanks Meter: 11 | Look! Checking NAND flash in a 6253 NOR flash is the only way to make it work, why? Please remember where can i send this phone full flash thanks again! COM13 [VCP0] selected module v3.96 Device: _Autodetect MT6228-6268 NAND Checking data, wait... Action: read/check information interface: BROM_DLL_v3.1016.00 Connect... Phone should be Switched OFF ! Press and HOLD Power button now ! Connecting... Booting... Release Power button now ! bootcode current/expected: 3.2/3.2 CPU: 6253:8A02:8A00 status: FF bbchip bl ver: FE NOR flash id[00C8]: 00EC:225400000000 [SAMSUNG] K5N6433ATM chip size: 8Mb otp status/size: S_DA_NOR_OTP_NOT_SUPPORT/00000000 NAND flash chip: not installed internal RAM size: 00020000 external RAM: absent done Set baudrate (921600)... done ram test... testing 32bit... 32bit ram test passed testing 16bit... 16bit ram test passed ram test passed ===> detect existing firmware structure... detect ffs... ffs offset/size: 00000000/00000000 detect sec ro... detect custom parameters... detect project-id... project-id: MAUI.09AW0936MP_SLIM.V71 detect NOR info... number of areas/bytes to read: 1:00050000 reading (HW_STORAGE_NOR)... TCL-ID detection... TCL-ID detection done startup code area #1 detection... startup code area #1 detection done rom info ver: 07 sw version: HEXING53_09A_GEMINI_PCB01_GPRS_MT6253_S00.MAUI_09A W0936MP_SLIM_V71.BIN_FLNK5N6433ATM_AD11 project-id: MAUI.09AW0936MP_SLIM.V71, 00000000 code offset: 00000000 ffs offset/size [02]: 00750000/000B0000 rom info structure: [standard] type (07) TCL-ID is absent ===> done ==================== New firmware found (v.3.96, database date: 21.06.2011): HEXING53_09A_GEMINI_PCB01_GPRS_MT6253_S00.MAUI_09A W0936MP_SLIM_V71.BIN_FLNK5N6433ATM_AD11 This firmware is missing in support area. If this phone is good and working: - download latest software from support area and try again, probably this firmware already supported in latest software - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage - include in your e-mail full text from phone back label (phone name etc.) ==================== Disconnect... done Finished, time used: 57 sec Remove/Install battery now ! |
| |
|
07-05-2011, 22:00
| #8 (permalink) |
| Freak Poster Join Date: Dec 2010
Posts: 268
Member: 1463928 Status: Offline Thanks Meter: 11 | GREAT READING! Today sendind this to Infinity SUpport  COM13 [VCP0] selected module v3.96 Device: _Autodetect MT6228-6268 NAND Checking data, wait... Action: read flash NAND interface: BROM_DLL_v3.1016.00 Connect... Phone should be Switched OFF ! Press and HOLD Power button now ! Connecting... Booting... Release Power button now ! bootcode current/expected: 3.2/3.2 CPU: 6253:8A02:8A00 status: FF bbchip bl ver: FE NOR flash id[00C8]: 00EC:225400000000 [SAMSUNG] K5N6433ATM chip size: 8Mb otp status/size: S_DA_NOR_OTP_NOT_SUPPORT/00000000 NAND flash chip: not installed internal RAM size: 00020000 external RAM: absent done Set baudrate (921600)... done ram test... testing 32bit... 32bit ram test passed testing 16bit... 16bit ram test passed ram test passed ===> detect existing firmware structure... detect ffs... ffs offset/size: 00000000/00000000 detect sec ro... detect custom parameters... detect project-id... project-id: MAUI.09AW0936MP_SLIM.V71 detect NOR info... number of areas/bytes to read: 1:00050000 reading (HW_STORAGE_NOR)... TCL-ID detection... TCL-ID detection done startup code area #1 detection... startup code area #1 detection done rom info ver: 07 sw version: HEXING53_09A_GEMINI_PCB01_GPRS_MT6253_S00.MAUI_09A W0936MP_SLIM_V71.BIN_FLNK5N6433ATM_AD11 project-id: MAUI.09AW0936MP_SLIM.V71, 00000000 code offset: 00000000 ffs offset/size [02]: 00750000/000B0000 rom info structure: [standard] type (07) TCL-ID is absent ===> done ==================== New firmware found (v.3.96, database date: 21.06.2011): HEXING53_09A_GEMINI_PCB01_GPRS_MT6253_S00.MAUI_09A W0936MP_SLIM_V71.BIN_FLNK5N6433ATM_AD11 This firmware is missing in support area. If this phone is good and working: - download latest software from support area and try again, probably this firmware already supported in latest software - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage - include in your e-mail full text from phone back label (phone name etc.) ==================== area size: 8Mb number of areas/bytes to read: 1:00800000 reading (HW_STORAGE_NOR)... file saved: C:\InfinityBox\MModule\E5_HEXING53_09A_GEMINI_PCB0 1_GPRS_MT6253_S00.MAUI_09AW0936MP_SLIM_V71.BIN_FLN K5N6433ATM_AD11__fullflash_20110705-175227.B0M.bin Disconnect... done Finished, time used: 10 min 34 sec Remove/Install battery now ! |
| |
|
07-05-2011, 22:32
| #9 (permalink) |
| Product Supporter  Join Date: May 2005 Location: uae
Posts: 29,245
Member: 148515 Status: Offline Thanks Meter: 19,534 | hello! small number of 6253 CPU phones may give error on fast pinout search. in this case slow will always do the job correctly. We are working under improving Fast search mode, updates will follow thank you for file which you sent us! |
| |
|
07-05-2011, 23:15
| #10 (permalink) |
| Freak Poster Join Date: Dec 2010
Posts: 268
Member: 1463928 Status: Offline Thanks Meter: 11 | What about this trying to read another full flash with a similar phone? COM13 [VCP0] selected module v3.96 Device: _Autodetect MT6228-6268 NAND Checking data, wait... Action: read flash NAND interface: BROM_DLL_v3.1016.00 Connect... Phone should be Switched OFF ! Press and HOLD Power button now ! Connecting... Booting... Release Power button now ! bootcode current/expected: 3.2/3.2 CPU: 6253:8A02:8A00 status: FF bbchip bl ver: FE NOR flash id[0093]: 0089:890300000000 [INTEL] PF38F30xxM0x1xx chip size: 16Mb otp status/size: S_DA_NOR_OTP_EXIST/00000108 NAND flash chip: not installed internal RAM size: 00020000 external RAM: absent done Set baudrate (115200)... done ram test... testing 32bit... 32bit ram test passed testing 16bit... 16bit ram test passed ram test passed ===> detect existing firmware structure... detect ffs... ffs offset/size: 00000000/00000000 detect sec ro... detect custom parameters... detect project-id... project-id: PRJ_C072_2A_C_M_2_V102 detect NOR info... number of areas/bytes to read: 1:00050000 reading (HW_STORAGE_NOR)... TCL-ID detection... TCL-ID detection done startup code area #1 detection... startup code area #1 detection done rom info ver: 07 sw version: HEXING53_09A_GEMINI_PCB01_GPRS_MT6253_S00.PRJ_C072 _2A_C_M_2_V102.BIN_FLNPF38F3040M0Y3DE project-id: PRJ_C072_2A_C_M_2_V102, 00000000 code offset: 00000000 ffs offset/size [02]: 00E00000/00200000 rom info structure: [standard] type (07) TCL-ID is absent ===> done ==================== New firmware found (v.3.96, database date: 21.06.2011): HEXING53_09A_GEMINI_PCB01_GPRS_MT6253_S00.PRJ_C072 _2A_C_M_2_V102.BIN_FLNPF38F3040M0Y3DE This firmware is missing in support area. If this phone is good and working: - download latest software from support area and try again, probably this firmware already supported in latest software - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage - include in your e-mail full text from phone back label (phone name etc.) ==================== area size: 16Mb number of areas/bytes to read: 1:01000000 reading (HW_STORAGE_NOR)... error: can not read memory: 0FAA:S_FT_READBACK_FAIL can not read memory, errorcode: 0FAA it may be problem with current operation error: last error: 0FAA:S_FT_READBACK_FAILDisconnect... done Finished, time used: 26 min 49 sec Remove/Install battery now ! |
| |
|
| Bookmarks |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 6150 Lock Problem | Zeljko | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 2 | 10-16-2013 08:16 |
| GId1 problem | old_man | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 1 | 10-18-2006 15:21 |
| HELP: Problem with 5110 | Xabi | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 1 | 07-16-1999 00:44 |
| Really big favour! | MiMiR the WiseMan | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 3 | 06-18-1999 03:21 |
|
|
Linear Mode
