GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 12-09-2009, 18:43   #1 (permalink)
Freak Poster
 
Join Date: Oct 2006
Posts: 159
Member: 376302
Status: Offline
Thanks Meter: 26
Bird F501a not Unlock and Dead After Flashing


I have one Bird F501a From Viva Dominican Rerpublic, it passes a flash to him of Support but still dead, already I did to him I format complete, to repair security

Complete Format



COM1 [VCP0] selected
module v2.98
Device: Bird-F501A
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
Do you want to make ffs/eeprom backup before format ?
ffs/eeprom backup enabled, it may takes several minutes !
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:AA03:0003
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: 2nd [enhanced] generation
TCL-ID is absent
startup code area #1 is Ok
startup code area #1 backup saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\id.8B CB0AD8.[DC2007B1_DOMINICAN_PCB01_GPRS_MT6226_S01.V1_00_01_ M080125DOM-V24.BIN_7D0024BB].rpl
rom info detection finished
device-id: 8BCB0AD8
rom info protocol ver: 04
ver. sw 1: DC2007B1_DOMINICAN_PCB01_GPRS_MT6226_S01.V1_00_01_ M080125DOM-V24.BIN
ver. sw 2: V1.00.01_M080125DOM-V24, BB24007D
code offset: 00000000
ffs offset/size: 00E00000/00200000
ffs/eeprom address assigned: 00E00000
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
reading: Bird-F501A_DC2007B1_DOMINICAN_PCB01_GPRS_MT6226_S01.V1_ 00_01_M080125DOM-V24__ffs...
file saved: C:\Archivos de programa\InfinityBox\MModule\Bird-F501A_DC2007B1_DOMINICAN_PCB01_GPRS_MT6226_S01.V1_ 00_01_M080125DOM-V24__ffs_20091209-131722.B0E.bin
flash: 98004900000002:29EA0000000000
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
Write Done
====> Finalization ...
ffs formatting...
flash: 98004900000002:29EA0000000000
Finalization Done
file saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\Bird-F501A_DC2007B1_DOMINICAN_PCB01_GPRS_MT6226_S01.V1_ 00_01_M080125DOM-V24__system_log_8BCB0AD8_7D0024BB_20091209-131818.B0X.bin
Finished, time used: 330 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !




Repair Security



COM1 [VCP0] selected
module v2.98
Device: Bird-F501A
Checking data, wait...
advanced flash detection enabled
Action: repair security area
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:AA03:0003
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: 2nd [enhanced] generation
TCL-ID is absent
startup code area #1 is Ok
startup code area #1 backup saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\id.8B CB0AD8.[DC2007B1_DOMINICAN_PCB01_GPRS_MT6226_S01.V1_00_01_ M080125DOM-V24.BIN_7D0024BB].rpl
rom info detection finished
device-id: 8BCB0AD8
rom info protocol ver: 04
ver. sw 1: DC2007B1_DOMINICAN_PCB01_GPRS_MT6226_S01.V1_00_01_ M080125DOM-V24.BIN
ver. sw 2: V1.00.01_M080125DOM-V24, BB24007D
code offset: 00000000
ffs offset/size: 00E00000/00200000
ffs/eeprom address assigned: 00E00000
startup code area #1 check...
startup code area #1 fixed
sec info (fast) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
flash: 98004900000002:29EA0000000000
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
Write Done
====> Finalization ...
ffs formatting...
flash: 98004900000002:29EA0000000000
Finalization Done
file saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\Bird-F501A_DC2007B1_DOMINICAN_PCB01_GPRS_MT6226_S01.V1_ 00_01_M080125DOM-V24__system_log_8BCB0AD8_7D0024BB_20091209-132129.B0X.bin
Finished, time used: 62 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !
  Reply With Quote
The Following User Says Thank You to ramon9622 For This Useful Post:
Old 12-09-2009, 20:14   #2 (permalink)
Product Manager
 
InfinitySupport's Avatar
 
Join Date: Mar 2005
Location: infinity-box
Posts: 37,475
Member: 130995
Status: Offline
Thanks Meter: 33,856
Hello,

What was phone original firmware version ?

Do you have an original full flash backup ?
  Reply With Quote
Old 12-09-2009, 23:15   #3 (permalink)
Freak Poster
 
Join Date: Oct 2006
Posts: 159
Member: 376302
Status: Offline
Thanks Meter: 26
F501

Yes i have full flash after to make unlock y power on
  Reply With Quote
Old 12-09-2009, 23:31   #4 (permalink)
Product Manager
 
InfinitySupport's Avatar
 
Join Date: Mar 2005
Location: infinity-box
Posts: 37,475
Member: 130995
Status: Offline
Thanks Meter: 33,856
Hello,

If you have full flash backup file, send it to [email protected] so we will be able to check it.
  Reply With Quote
Old 12-09-2009, 23:32   #5 (permalink)
Freak Poster
 
Join Date: Oct 2006
Posts: 159
Member: 376302
Status: Offline
Thanks Meter: 26
F501a

I send flash and security backup to email support
  Reply With Quote
Old 12-11-2009, 04:08   #6 (permalink)
Freak Poster
 
Join Date: Oct 2006
Posts: 159
Member: 376302
Status: Offline
Thanks Meter: 26
F501a

Please i need help for revive this phone
  Reply With Quote
Old 12-11-2009, 06:48   #7 (permalink)
Product Manager
 
Faisal_Computer's Avatar
 
Join Date: Jun 2005
Location: Kamalia, Pakistan.
Age: 33
Posts: 16,785
Member: 151871
Status: Offline
Thanks Meter: 70,701
Quote:
Originally Posted by ramon9622 View Post
Please i need help for revive this phone
Hello,

If you have full flash backup file, send it to [email protected] so we will be able to check it.

Read what supporters say !!

if you have Good working mobile or if you take backup while mobile is working good please send that flash file to infinity or upload it on rapidshare.com and post link, infinity will upload it on support area where you can download and flash the phone
BR
Faisal_Computer
  Reply With Quote
Old 12-11-2009, 13:40   #8 (permalink)
Freak Poster
 
Join Date: Oct 2006
Posts: 159
Member: 376302
Status: Offline
Thanks Meter: 26
F501a

Allready send Full Backup to Support but nor response.
  Reply With Quote
Old 12-11-2009, 17:55   #9 (permalink)
Product Manager
 
InfinitySupport's Avatar
 
Join Date: Mar 2005
Location: infinity-box
Posts: 37,475
Member: 130995
Status: Offline
Thanks Meter: 33,856
Hello,

I see in your mail "This is flash dead Bird F501a Viva Dominican Republic".
Did you read flash from dead phone or from good working phone ?
  Reply With Quote
Old 12-11-2009, 18:59   #10 (permalink)
Freak Poster
 
Join Date: Oct 2006
Posts: 159
Member: 376302
Status: Offline
Thanks Meter: 26
F501a

Ok, sorry but is flash is *** working Order but after Make unlock.
  Reply With Quote
Old 12-11-2009, 19:27   #11 (permalink)
No Life Poster
 
Join Date: Dec 2006
Posts: 1,548
Member: 416710
Status: Offline
Thanks Meter: 391
Quote:
Originally Posted by ramon9622 View Post
Ok, sorry but is flash is *** working Order but after Make unlock.
Which carrier is your phone? if is VIVA firm is in support area.
  Reply With Quote
Old 12-15-2009, 04:00   #12 (permalink)
Freak Poster
 
Join Date: Oct 2006
Posts: 159
Member: 376302
Status: Offline
Thanks Meter: 26
F501a Still dead

Allready flashed with 2 flash from support area but still Dead

I need help how to relive this phone

Thanks

Make Flash with other flash from support but dead

COM3 [VCP0] selected
module v2.99
Device: Bird-F501A
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
Bird-F501_DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_0 3_M080313GUY-V24_En_Es.B0M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:AA03:0003
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: 2nd [enhanced] generation
TCL-ID is absent
startup code area #1 is Ok
startup code area #1 backup saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\id.8B CB0AD8.[DC2007B1_DOMINICAN_PCB01_GPRS_MT6226_S01.V1_00_01_ M080125DOM-V24.BIN_7D0024BB].rpl
rom info detection finished
device-id: 8BCB0AD8
rom info protocol ver: 04
ver. sw 1: DC2007B1_DOMINICAN_PCB01_GPRS_MT6226_S01.V1_00_01_ M080125DOM-V24.BIN
ver. sw 2: V1.00.01_M080125DOM-V24, BB24007D
code offset: 00000000
ffs offset/size: 00E00000/00200000
ffs/eeprom address assigned: 00E00000
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
sec info (fast) detection...
searching sec info#1...
.
search sec info#1 finished
usb bootloader (file) is absent
startup code area #1 check...
startup code area #1 calculation...
startup code area #1 fixed
file saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\Bird-F501A_DC2007B1_DOMINICAN_PCB01_GPRS_MT6226_S01.V1_ 00_01_M080125DOM-V24__system_log_8BCB0AD8_7D0024BB_20091214-220125.B0X.bin
Area: Firmware
flash: 98004900000002:29EA0000000000
Write: Firmware
sec info (fast) detection...
searching sec info#1...
.
search sec info#1 finished
Write Done
====> Finalization ...
Finalization Done
file saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\Bird-F501A_DC2007B1_DOMINICAN_PCB01_GPRS_MT6226_S01.V1_ 00_01_M080125DOM-V24__system_log_8BCB0AD8_7D0024BB_20091214-222320.B0X.bin
Finished, time used: 1367 sec
Remove/Install battery now !

Make unlock , Dead
COM3 [VCP0] selected
module v2.99
Device: Bird-F501A
Checking data, wait...
advanced flash detection enabled
Action: "sp-unlock"
unlock method: standard
ffs/eeprom backup enabled, it may takes several minutes !
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:AA03:0003
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: 2nd [enhanced] generation
TCL-ID is absent
startup code area #1 is Ok
startup code area #1 backup saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\id.8B CB0AD8.[DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_03_M08 0313GUY-V24.BIN_D33FC513].rpl
rom info detection finished
device-id: 8BCB0AD8
rom info protocol ver: 04
ver. sw 1: DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_03_M08 0313GUY-V24.BIN
ver. sw 2: V1.00.03_M080313GUY-V24, 13C53FD3
code offset: 00000000
ffs offset/size: 00E00000/00200000
ffs/eeprom address assigned: 00E00000
startup code area #1 check...
startup code area #1 fixed
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
reading: Bird-F501A_DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_ 03_M080313GUY-V24__ffs...
file saved: C:\Archivos de programa\InfinityBox\MModule\Bird-F501A_DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_ 03_M080313GUY-V24__ffs_20091214-223851.B0E.bin
flash: 98004900000002:29EA0000000000
Backup required data Done
====> Patch required data ...
detection procedure, wait...
error: phone is not locked or unknown eeprom
Patch required data Fail
file saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\Bird-F501A_DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_ 03_M080313GUY-V24__system_log_8BCB0AD8_D33FC513_20091214-224337.B0X.bin
Finished, time used: 566 sec
Remove/Install battery now !

Complete Format , Dead

COM3 [VCP0] selected
module v2.99
Device: Bird-F501A
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
Do you want to make ffs/eeprom backup before format ?
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:AA03:0003
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: 2nd [enhanced] generation
TCL-ID is absent
startup code area #1 is Ok
startup code area #1 backup saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\id.8B CB0AD8.[DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_03_M08 0313GUY-V24.BIN_D33FC513].rpl
rom info detection finished
device-id: 8BCB0AD8
rom info protocol ver: 04
ver. sw 1: DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_03_M08 0313GUY-V24.BIN
ver. sw 2: V1.00.03_M080313GUY-V24, 13C53FD3
code offset: 00000000
ffs offset/size: 00E00000/00200000
ffs/eeprom address assigned: 00E00000
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
flash: 98004900000002:29EA0000000000
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
Write Done
====> Finalization ...
ffs formatting...
flash: 98004900000002:29EA0000000000
Finalization Done
file saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\Bird-F501A_DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_ 03_M080313GUY-V24__system_log_8BCB0AD8_D33FC513_20091214-224738.B0X.bin
Finished, time used: 68 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

Repair Security area

COM3 [VCP0] selected
module v2.99
Device: Bird-F501A
Checking data, wait...
advanced flash detection enabled
Action: repair security area
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:AA03:0003
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: 2nd [enhanced] generation
TCL-ID is absent
startup code area #1 is Ok
startup code area #1 backup saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\id.8B CB0AD8.[DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_03_M08 0313GUY-V24.BIN_D33FC513].rpl
rom info detection finished
device-id: 8BCB0AD8
rom info protocol ver: 04
ver. sw 1: DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_03_M08 0313GUY-V24.BIN
ver. sw 2: V1.00.03_M080313GUY-V24, 13C53FD3
code offset: 00000000
ffs offset/size: 00E00000/00200000
ffs/eeprom address assigned: 00E00000
startup code area #1 check...
startup code area #1 fixed
sec info (fast) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
flash: 98004900000002:29EA0000000000
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
Write Done
====> Finalization ...
ffs formatting...
flash: 98004900000002:29EA0000000000
Finalization Done
file saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\Bird-F501A_DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_ 03_M080313GUY-V24__system_log_8BCB0AD8_D33FC513_20091214-224948.B0X.bin
Finished, time used: 97 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

I need help how to relive this phone

Thanks
  Reply With Quote
Old 12-16-2009, 06:31   #13 (permalink)
Product Manager
 
Faisal_Computer's Avatar
 
Join Date: Jun 2005
Location: Kamalia, Pakistan.
Age: 33
Posts: 16,785
Member: 151871
Status: Offline
Thanks Meter: 70,701
Quote:
Originally Posted by ramon9622 View Post
Allready flashed with 2 flash from support area but still Dead

I need help how to relive this phone

Thanks

Make Flash with other flash from support but dead

COM3 [VCP0] selected
module v2.99
Device: Bird-F501A
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
Bird-F501_DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_0 3_M080313GUY-V24_En_Es.B0M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:AA03:0003
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: 2nd [enhanced] generation
TCL-ID is absent
startup code area #1 is Ok
startup code area #1 backup saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\id.8B CB0AD8.[DC2007B1_DOMINICAN_PCB01_GPRS_MT6226_S01.V1_00_01_ M080125DOM-V24.BIN_7D0024BB].rpl
rom info detection finished
device-id: 8BCB0AD8
rom info protocol ver: 04
ver. sw 1: DC2007B1_DOMINICAN_PCB01_GPRS_MT6226_S01.V1_00_01_ M080125DOM-V24.BIN
ver. sw 2: V1.00.01_M080125DOM-V24, BB24007D
code offset: 00000000
ffs offset/size: 00E00000/00200000
ffs/eeprom address assigned: 00E00000
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
sec info (fast) detection...
searching sec info#1...
.
search sec info#1 finished
usb bootloader (file) is absent
startup code area #1 check...
startup code area #1 calculation...
startup code area #1 fixed
file saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\Bird-F501A_DC2007B1_DOMINICAN_PCB01_GPRS_MT6226_S01.V1_ 00_01_M080125DOM-V24__system_log_8BCB0AD8_7D0024BB_20091214-220125.B0X.bin
Area: Firmware
flash: 98004900000002:29EA0000000000
Write: Firmware
sec info (fast) detection...
searching sec info#1...
.
search sec info#1 finished
Write Done
====> Finalization ...
Finalization Done
file saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\Bird-F501A_DC2007B1_DOMINICAN_PCB01_GPRS_MT6226_S01.V1_ 00_01_M080125DOM-V24__system_log_8BCB0AD8_7D0024BB_20091214-222320.B0X.bin
Finished, time used: 1367 sec
Remove/Install battery now !

Make unlock , Dead
COM3 [VCP0] selected
module v2.99
Device: Bird-F501A
Checking data, wait...
advanced flash detection enabled
Action: "sp-unlock"
unlock method: standard
ffs/eeprom backup enabled, it may takes several minutes !
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:AA03:0003
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: 2nd [enhanced] generation
TCL-ID is absent
startup code area #1 is Ok
startup code area #1 backup saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\id.8B CB0AD8.[DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_03_M08 0313GUY-V24.BIN_D33FC513].rpl
rom info detection finished
device-id: 8BCB0AD8
rom info protocol ver: 04
ver. sw 1: DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_03_M08 0313GUY-V24.BIN
ver. sw 2: V1.00.03_M080313GUY-V24, 13C53FD3
code offset: 00000000
ffs offset/size: 00E00000/00200000
ffs/eeprom address assigned: 00E00000
startup code area #1 check...
startup code area #1 fixed
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
reading: Bird-F501A_DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_ 03_M080313GUY-V24__ffs...
file saved: C:\Archivos de programa\InfinityBox\MModule\Bird-F501A_DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_ 03_M080313GUY-V24__ffs_20091214-223851.B0E.bin
flash: 98004900000002:29EA0000000000
Backup required data Done
====> Patch required data ...
detection procedure, wait...
error: phone is not locked or unknown eeprom
Patch required data Fail
file saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\Bird-F501A_DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_ 03_M080313GUY-V24__system_log_8BCB0AD8_D33FC513_20091214-224337.B0X.bin
Finished, time used: 566 sec
Remove/Install battery now !

Complete Format , Dead

COM3 [VCP0] selected
module v2.99
Device: Bird-F501A
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
Do you want to make ffs/eeprom backup before format ?
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:AA03:0003
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: 2nd [enhanced] generation
TCL-ID is absent
startup code area #1 is Ok
startup code area #1 backup saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\id.8B CB0AD8.[DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_03_M08 0313GUY-V24.BIN_D33FC513].rpl
rom info detection finished
device-id: 8BCB0AD8
rom info protocol ver: 04
ver. sw 1: DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_03_M08 0313GUY-V24.BIN
ver. sw 2: V1.00.03_M080313GUY-V24, 13C53FD3
code offset: 00000000
ffs offset/size: 00E00000/00200000
ffs/eeprom address assigned: 00E00000
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
flash: 98004900000002:29EA0000000000
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
Write Done
====> Finalization ...
ffs formatting...
flash: 98004900000002:29EA0000000000
Finalization Done
file saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\Bird-F501A_DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_ 03_M080313GUY-V24__system_log_8BCB0AD8_D33FC513_20091214-224738.B0X.bin
Finished, time used: 68 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

Repair Security area

COM3 [VCP0] selected
module v2.99
Device: Bird-F501A
Checking data, wait...
advanced flash detection enabled
Action: repair security area
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:AA03:0003
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: 2nd [enhanced] generation
TCL-ID is absent
startup code area #1 is Ok
startup code area #1 backup saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\id.8B CB0AD8.[DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_03_M08 0313GUY-V24.BIN_D33FC513].rpl
rom info detection finished
device-id: 8BCB0AD8
rom info protocol ver: 04
ver. sw 1: DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_03_M08 0313GUY-V24.BIN
ver. sw 2: V1.00.03_M080313GUY-V24, 13C53FD3
code offset: 00000000
ffs offset/size: 00E00000/00200000
ffs/eeprom address assigned: 00E00000
startup code area #1 check...
startup code area #1 fixed
sec info (fast) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
flash: 98004900000002:29EA0000000000
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
Write Done
====> Finalization ...
ffs formatting...
flash: 98004900000002:29EA0000000000
Finalization Done
file saved: C:\Archivos de programa\InfinityBox\MModule\backup_security\Bird-F501A_DC2007B1_GUYANA_PCB01_GPRS_MT6226_S01.V1_00_ 03_M080313GUY-V24__system_log_8BCB0AD8_D33FC513_20091214-224948.B0X.bin
Finished, time used: 97 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

I need help how to relive this phone

Thanks
Please read above infinitysupport posts

BR

Faisal_Computer
  Reply With Quote
Old 12-20-2009, 22:13   #14 (permalink)
Product Manager
 
InfinitySupport's Avatar
 
Join Date: Mar 2005
Location: infinity-box
Posts: 37,475
Member: 130995
Status: Offline
Thanks Meter: 33,856
@ramon9622
Try to flash phone with this firmware from support area: Bird-F501A_F501_DOMINICA_PCB01_GPRS_MT6225_S00.V1_00_01 _M090727DOM-V5-F2_En_Fr_Es.B0M.bin
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
w350a not boot and dead after write gdfs file rajeshbahri Sony Ericsson Hardware Repair 1 10-21-2009 17:48
C975 Restart After Unlocking And Dead After Flashing alamgarh Smart-Clip 3 12-05-2008 07:27

 



All times are GMT +1. The time now is 13:23.



Powered by Searchlight © 2018 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.67779 seconds with 8 queries

SEO by vBSEO