blu zoey no service after wrong flash - GSM-Forum

gorgans · 06-22-2015, 22:23

i have blu zoey t166 that i flashed by mistake with BLU_T176_V21_GENERIC_20130902_1820. i now flash it correct fileBLU_T166_V15_GENERIC_131217
but phone says no service.

i Flash,format,repair imei, but still No Service.
is there a nvram file i can write to repair phone?
i also read flash from phone from same network and write to phone but still no service.

how can i fix this?

Start at : [6/22/2015 / 3:55:39 PM]
Operation : Flash [ v1.21 ]

======= Flash
Files set for flashing :
[ MCU ] : HEXING60D_11B_PCB01_gprs_MT6260_S00.MAUI_11B_W13_0 8_MP_V1_F11.bin

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 20 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : 0000
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 971697E4CBAFE494164CA21A68AA47E5
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : EF00 4000 1600 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00300000
SDS : 0x00000000 , 0x00000000

File_Info : HEXING60D_11B_PCB01_gprs_MT6260_S00.MAUI_11B_W13_0 8_MP_V1_F11.bin
FileVersion : MAUI.11B.W13.08.MP.V1.F11
Flash now

Erase region , wait ...
Write data , wait ...
Write : HEXING60D_11B_PCB01_gprs_MT6260_S00.MAUI_11B_W13_0 8_MP_V1_F11.bin

Done!
Elapsed: 00:00:35
Reconnect Power/Cable!

JayDi · 06-23-2015, 07:16

Hello. FullFlash from same model, normally, should make phone alive. Try use same HW and SW revision dump.

gorgans · 06-23-2015, 22:40

Quote:

Originally Posted by JayDi

Hello. FullFlash from same model, normally, should make phone alive. Try use same HW and SW revision dump.

phone is alive but no network

JayDi · 06-24-2015, 09:08

Maybe, they have different HW versions?

HERBERT23 · 07-21-2015, 22:37

Hi guys need this file also blu zoey t166

06-22-2015, 22:23	#1 (permalink)
gorgans No Life Poster Join Date: May 2003 Location: Jamaica Posts: 1,967 Member: 28559 Status: Offline Thanks Meter: 85	blu zoey no service after wrong flash i have blu zoey t166 that i flashed by mistake with BLU_T176_V21_GENERIC_20130902_1820. i now flash it correct fileBLU_T166_V15_GENERIC_131217 but phone says no service. i Flash,format,repair imei, but still No Service. is there a nvram file i can write to repair phone? i also read flash from phone from same network and write to phone but still no service. how can i fix this? Start at : [6/22/2015 / 3:55:39 PM] Operation : Flash [ v1.21 ] ======= Flash Files set for flashing : [ MCU ] : HEXING60D_11B_PCB01_gprs_MT6260_S00.MAUI_11B_W13_0 8_MP_V1_F11.bin 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey ( '' ) Wait for phone... Phone found! [ 20 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : 0000 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0000 BB_CPU_SN : 971697E4CBAFE494164CA21A68AA47E5 BROM Protocol Version : 05 Setting... Setting done , result code 0x000E BROM stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... InitRes : 00000000 DEV[0] : EF00 4000 1600 0000 DEV[1] : 0000 0000 0000 0000 DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B DA_CSTAT : 0x5A SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV [0] : FLASH_DIE : 00EF 0040 0016 0000 [0] : FLASH_LEN : 0x00300000 SDS : 0x00000000 , 0x00000000 File_Info : HEXING60D_11B_PCB01_gprs_MT6260_S00.MAUI_11B_W13_0 8_MP_V1_F11.bin FileVersion : MAUI.11B.W13.08.MP.V1.F11 Flash now Erase region , wait ... Write data , wait ... Write : HEXING60D_11B_PCB01_gprs_MT6260_S00.MAUI_11B_W13_0 8_MP_V1_F11.bin Done! Elapsed: 00:00:35 Reconnect Power/Cable! Last edited by gorgans; 06-22-2015 at 22:32.*

06-23-2015, 07:16	#2 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Hello. FullFlash from same model, normally, should make phone alive. Try use same HW and SW revision dump.

06-24-2015, 09:08	#4 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Maybe, they have different HW versions?

07-21-2015, 22:37	#5 (permalink)
HERBERT23 Freak Poster Join Date: Mar 2006 Location: Jamaica Posts: 302 Member: 244159 Status: Offline Thanks Meter: 16	Hi guys need this file also blu zoey t166