boot error??????????????????????help infinity - GSM-Forum

jothi737 · 09-28-2007, 15:52

zt588 1x20 pin

COM3 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 5 sec
Remove/Install battery now !

what problem
i change cable but same pls help

**InfinitySupport** · 09-28-2007, 16:01

It's cable problem, wrong pinout. You must use correct cable and select correct COM port.

Due to a lot of different models with the same name but absolutely different hardware,
bottom connectors and different pinouts we recommend you to make detailed description of model,
attach phone photo, phone bottom connector photo and information about Gnd and Charge pins on phone bottom connector.

After you have this information prepared, please, check the next detailed description how to get pinout for your model:

use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297
if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle.txt
if not helps, please read: http:///vbb/showpo...36&postcount=7
if not helps, please read: http:///vbb/showthread.php?t=433447

tsarkh · 09-28-2007, 20:48

MAN can u tell what models of infinity box do you use???
please put a picture of it here..
is it the new small box ?????????
or the old big one??

**InfinitySupport** · 09-29-2007, 13:54

There is absolutely no any difference what box to use: old, new, not so new, not so old, red, silver, black, blue or any other color or size.

muhned · 09-29-2007, 14:59

hi

i have same problem

i have infinity red box and i have cable the infinity for chinese miracle ( 29 cable infinity for chinese miracle )

but not connect the infinity with any model

Exa cable anycool d66 i use cable name ( UB - CECT004 CECT U8800 )

help infinity team

09-28-2007, 15:52	#1 (permalink)
jothi737 Freak Poster Join Date: Oct 2006 Location: INDIA TAMILNADU SALEM Posts: 288 Member: 369539 Status: Offline Sonork: 1584109 Thanks Meter: 32	boot error??????????????????????help infinity zt588 1x20 pin COM3 [VCP0] selected Device: Autodetect 6205-6227 NOR Checking data, wait... advanced flash detection active Action: reset Boot... Press and HOLD Power button now ! baud autodetection active 19200 Connecting, wait... error: boot phase#1 failed Release Power button now ! in case of initial connection problem: on/off "Boot baudrate autoselect" box. Boot Fail Finished, time used: 5 sec Remove/Install battery now ! what problem i change cable but same pls help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia N72 Booting error help	JOCKER102	Nokia Base Band 5 ( BB-5 )	2	11-29-2009 18:13
N73 ape boot error help	odraregnivla	Nokia Base Band 5 ( BB-5 )	5	03-06-2009 16:19
c92 boot error, infinity help ?	aloksoni	Infinity-Box	18	02-24-2008 09:48
6600 2nd boot error help me	babatnagar	Nokia Hardware & Hardware Repair	9	08-22-2007 19:00
6310i and 7110 ! 1st Boot Error! Help	Maurone	Twisterflasher	9	06-11-2005 02:23

09-28-2007, 16:01	#2 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	It's cable problem, wrong pinout. You must use correct cable and select correct COM port. Due to a lot of different models with the same name but absolutely different hardware, bottom connectors and different pinouts we recommend you to make detailed description of model, attach phone photo, phone bottom connector photo and information about Gnd and Charge pins on phone bottom connector. After you have this information prepared, please, check the next detailed description how to get pinout for your model: use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297 if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle.txt if not helps, please read: http:///vbb/showpo...36&postcount=7 if not helps, please read: http:///vbb/showthread.php?t=433447

09-28-2007, 20:48	#3 (permalink)
tsarkh No Life Poster Join Date: Jul 2005 Location: France Age: 48 Posts: 6,857 Member: 165812 Status: Offline Sonork: 100:1627635 Thanks Meter: 4,267	MAN can u tell what models of infinity box do you use??? please put a picture of it here.. is it the new small box ????????? or the old big one??

09-29-2007, 13:54	#4 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	There is absolutely no any difference what box to use: old, new, not so new, not so old, red, silver, black, blue or any other color or size.

09-29-2007, 14:59	#5 (permalink)
muhned No Life Poster Join Date: Nov 2005 Location: EingneeR Posts: 547 Member: 201469 Status: Offline Sonork: software Thanks Meter: 50	hi i have same problem i have infinity red box and i have cable the infinity for chinese miracle ( 29 cable infinity for chinese miracle ) but not connect the infinity with any model Exa cable anycool d66 i use cable name ( UB - CECT004 CECT U8800 ) help infinity team