can i Unlock FLY SLT100 with Infinity ? - GSM-Forum

.:Morpheus:. · 01-15-2008, 20:56

hi

can i Unlock FLY MODEL : SLT100 with Infinity
on the back of the phone is writin Model SLT100 not Fly-SLT100 ?

if yes witch pinout i use please Thanks

**InfinitySupport** · 01-15-2008, 21:10

Hello,

How about to look three lines down ?
http:///vbb/showthread.php?t=469930

.:Morpheus:. · 01-15-2008, 21:16

Quote:

Originally Posted by InfinitySupport

Hello,

How about to look three lines down ?
http:///vbb/showthread.php?t=469930

yeah its touch sceen mate so i can use pinout the one in infinity only RX TX GND no need to charge and +bat ?

Thanks

**InfinitySupport** · 01-16-2008, 01:25

Hello,

You need only Rx/Tx/Gnd

shaqmans · 01-22-2008, 14:21

Hello,
I bought a mobile phone which is Fly SLT100 but dont know how to unlock it? Any ideas please help.
Thanks.

**InfinitySupport** · 01-22-2008, 16:16

Quote:

Originally Posted by shaqmans

Hello,
I bought a mobile phone which is Fly SLT100 but dont know how to unlock it? Any ideas please help.
Thanks.

How about to read something before ask questions ?

f.e. this: http:///vbb/showthread.php?t=469930

MSCOMMUNICATION · 02-04-2008, 16:07

I TRY TO UNLOCK BUT NO ALL MATHORD USE BUT

COM29 [Serial2] selected
Action: user code
unlock method: smart fast
Model: Fly SLT100
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6228:8A02:8A02]...
CPU: MT6228
chip: 0031:0000:0101
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6228,E02
Date: 2004.07.02
Version: 1.0
Version: MAUI.06A.W06.36.MP.V36
Version: EZIO28_06A_HW
42 byte(s) read
imei: 35820901027682
connection Ok
145 byte(s) read
reading data...
reading data#2...
reading data#3...
building new data...
writing data...
user code set to: 0000
Finished, time used: 23 sec
Remove/Install battery now !

PLZ HELP

MS COMMUNICATION PAKISTAN

**InfinitySupport** · 02-05-2008, 03:41

@MSCOMMUNICATION
How about to look 5 messages up ?
http:///vbb/showpo...92&postcount=2

MSCOMMUNICATION · 02-05-2008, 13:21

I successfully unlock FLY SLT100 with full flash in support area, no need unlock after flash set will be auto unlocked

Fly-SLT100_Hummer-HT1_SLT100_HMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W 06_36_MP_V36_M3.00R_2007-07-26_En_Ru_Ua.B4M

Thanks infinity team

MS COMMUNICATION
MOBILE PARTS&SOFTWARE
SHOP#87 &94 1ST FLOOR SARHAD PLAZA LIAQAT ROAD RAWALPINDI PAKISTAN
OFFICE 0515558766
MOBILE 03009786768
EMAIL [email protected]
[email protected] [email protected]

**InfinitySupport** · 02-06-2008, 07:05

Hello,

Glad to hear about good results !
It'a a good example how is small manual from support area can solve big user's problem

rajabrotherscom · 02-19-2008, 16:47

a.o.a and hi to all

today i unlock stl100 ok without any problem flash with Fly-SLT100_Hummer-HT1_SLT100_HMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W 06_36_MP_V36_M3.00R_2007-07-26_En_Ru_Ua.B4M

hare is opration log...............

COM9 selected
Device: Fly SLT100
Checking data, wait...
Action: write NAND flash
"format ffs" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
source data: page only
identification#1 protocol ver: 04
ver. sw1: SLT100_HMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_3 6_MP_V36.BIN
ver. sw2: MAUI.06A.W06.36.MP.V36, 00000000
ffs offset/size: 02000000/02000000
id-page1 Ok
nfi area detection finished: Ok
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6228:8A02:8A02]...
CPU: MT6228
chip: 0031:0000:0101
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
version: 3.1
loader: 3.1.02
NAND: Hynix HY27XS08121M 512+16 32 pages, 66Mb
NAND id: AD76AD76
page size: 200+10
pages/block: 20
bits i/o: 08
address cycles: 04
blocks: 1000
ram size: 00800000
NOR: 0000:000000000000 [00000000]
NAND: 00AD:007600AD0076 [04200000]
NOR chip is not installed
Initialize Done
Set baud...
921600
Set baud Done
Identification...
reading structure area...
detecting structure...
source data: page+spare
converting data...
done 0x00010000 bytes
identification#1 protocol ver: 04
ver. sw1: SLT100_UKMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_ 36_MP_V36.BIN
ver. sw2: MAUI.06A.W06.36.MP.V36, 00000000
ffs offset/size: 02000000/02000000
id-page1 Ok
nfi area detection finished: Ok
identification#1 structure: 2nd [standard] generation
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
write core area 1 of 2...
write core area 2 of 2...
formatting...
.................................................. .................................................. Write Done
Finished, time used: 418 sec
Remove/Install battery now !

thanx infinity team ......................

br raja

mughalG · 06-26-2008, 16:58

SLT100 unlock successfully

COM3 [VCP0] selected
Device: Fly-SLT100
Checking data, wait...
Action: write NAND flash
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
source data: page only
identification#1 protocol ver: 04
ver. sw1: SLT100_HMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_3 6_MP_V36.BIN
ver. sw2: MAUI.06A.W06.36.MP.V36, 00000000
ffs offset/size: 02000000/02000000
id-page1 Ok
nfi area detection finished: Ok
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6228:8A02:8A02]...
CPU: MT6228
chip: 0031:0000:0101
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
version: 3.0207
loader: 3.748.0
NAND: Hynix HY27XS08121M 512+16 32 pages, 66Mb
NAND id: AD76AD76
page size: 200+10
pages/block: 20
bits i/o: 08
address cycles: 04
blocks: 1000
ram size: 00800000
NOR: 0000:000000000000 [00000000]
NAND: 00AD:007600AD0076 [04200000]
NOR chip is not installed
Initialize Done
Set baud...
115200
Set baud Done
Identification...
reading structure area...
detecting structure...
source data: page+spare
converting data...
done 0x00010000 bytes
identification#1 protocol ver: 04
ver. sw1: SLT100_UKMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_ 36_MP_V36.BIN
ver. sw2: MAUI.06A.W06.36.MP.V36, 00000000
ffs offset/size: 02000000/02000000
id-page1 Ok
nfi area detection finished: Ok
identification#1 structure: 2nd [standard] generation
Identification Done
Write...
write core area 1 of 2...
write core area 2 of 2...
Write Done
Finished, time used: 2281 sec
Remove/Install battery now !
BR mughalG

yasermalik · 09-14-2008, 11:32

COM4 [VCP0] selected
Device: Fly-SLT100
Checking data, wait...
Action: write NAND flash
read mode: 01
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
source data: page only
identification#1 protocol ver: 04
ver. sw1: SLT100_HMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_3 6_MP_V36.BIN
ver. sw2: MAUI.06A.W06.36.MP.V36, 00000000
ffs offset/size: 02000000/02000000
id-page1 Ok
nfi area detection finished: Ok
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6228:8A02:8A02]...
CPU: MT6228
chip: 0031:0000:0101
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
version: 3.0207
loader: 3.748.0
NAND: Hynix HY27XS08121M 512+16 32 pages, 66Mb
NAND id: AD76AD76
page size: 200+10
pages/block: 20
bits i/o: 08
address cycles: 04
blocks: 1000
ram size: 00800000
NOR: 0000:000000000000 [00000000]
NAND: 00AD:007600AD0076 [04200000]
NOR chip is not installed
Initialize Done
Set baud...
115200
Set baud Done
Identification...
reading structure area...
detecting structure...
source data: page only
identification#1 protocol ver: 04
ver. sw1: SLT100_UKMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_ 36_MP_V36.BIN
ver. sw2: MAUI.06A.W06.36.MP.V36, 00000000
ffs offset/size: 02000000/02000000
id-page1 Ok
nfi area detection finished: Ok
identification#1 structure: 2nd [standard] generation
Identification Done
Write...
write core area 1 of 2...
write core area 2 of 2...
Write Done
Finished, time used: 2279 sec
Remove/Install battery now !
BR YASERMALIK
EMAIL [email protected]
MOBILE .03436360983

**InfinitySupport** · 09-16-2008, 21:36

Thank you very much for test report !

Each test report with attached logs is very important for us so we can see how is Infinity-Box
software works and what is possible problems and successfully done work.

Softway · 09-16-2008, 22:17

tested on more then 10pcs.. all unlocked without any problem. just had to flash the phone. thats all...

01-15-2008, 20:56	#1 (permalink)
.:Morpheus:. No Life Poster Join Date: Dec 2003 Location: United Kingdom, ENGLAND Posts: 1,141 Member: 47774 Status: Offline Thanks Meter: 185	can i Unlock FLY SLT100 with Infinity ? hi can i Unlock FLY MODEL : SLT100 with Infinity on the back of the phone is writin Model SLT100 not Fly-SLT100 ? if yes witch pinout i use please Thanks

02-04-2008, 16:07	#7 (permalink)
MSCOMMUNICATION Freak Poster Join Date: Oct 2005 Location: Rawalpindi Pakistan Age: 45 Posts: 273 Member: 190947 Status: Offline Sonork: 100.96272 Thanks Meter: 161	Help Fly Slt 100 I TRY TO UNLOCK BUT NO ALL MATHORD USE BUT COM29 [Serial2] selected Action: user code unlock method: smart fast Model: Fly SLT100 Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 Initializing[6228:8A02:8A02]... CPU: MT6228 chip: 0031:0000:0101 Connecting, wait... Release Power button now ! Phone detected, wait... Hardware: MT6228,E02 Date: 2004.07.02 Version: 1.0 Version: MAUI.06A.W06.36.MP.V36 Version: EZIO28_06A_HW 42 byte(s) read imei: 35820901027682 connection Ok 145 byte(s) read reading data... reading data#2... reading data#3... building new data... writing data... user code set to: 0000 Finished, time used: 23 sec Remove/Install battery now ! PLZ HELP MS COMMUNICATION PAKISTAN

02-05-2008, 13:21	#9 (permalink)
MSCOMMUNICATION Freak Poster Join Date: Oct 2005 Location: Rawalpindi Pakistan Age: 45 Posts: 273 Member: 190947 Status: Offline Sonork: 100.96272 Thanks Meter: 161	Thanks infinity team I successfully unlock FLY SLT100 with full flash in support area, no need unlock after flash set will be auto unlocked Fly-SLT100_Hummer-HT1_SLT100_HMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W 06_36_MP_V36_M3.00R_2007-07-26_En_Ru_Ua.B4M Thanks infinity team MS COMMUNICATION MOBILE PARTS&SOFTWARE SHOP#87 &94 1ST FLOOR SARHAD PLAZA LIAQAT ROAD RAWALPINDI PAKISTAN OFFICE 0515558766 MOBILE 03009786768 EMAIL [email protected] [email protected] [email protected]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
can I unlock se J132 with infinity?	achi_nokia	Infinity-Box	4	08-09-2009 17:35
can i unlock lg kp170 with infinity box plz help?	asif_ae	Infinity-Box	5	02-20-2009 10:52
Can I unlock lobster 320 with infinity?	anastamir	Infinity-Box	1	08-10-2008 00:30
can we unlock vodafone 411cv with infinity ?	vinay_sharma	Infinity-Box	5	05-29-2008 13:47
Can I Unlock Moto F3 With Infinity	sartaj	Infinity-Box	6	09-26-2007 22:43

01-15-2008, 21:10	#2 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, How about to look three lines down ? http:///vbb/showthread.php?t=469930

01-16-2008, 01:25	#4 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, You need only Rx/Tx/Gnd

01-22-2008, 14:21	#5 (permalink)
shaqmans Junior Member Join Date: Jan 2008 Posts: 1 Member: 686483 Status: Offline Thanks Meter: 0	Hello, I bought a mobile phone which is Fly SLT100 but dont know how to unlock it? Any ideas please help. Thanks.

02-05-2008, 03:41	#8 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	@MSCOMMUNICATION How about to look 5 messages up ? http:///vbb/showpo...92&postcount=2

02-06-2008, 07:05	#10 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, Glad to hear about good results ! It'a a good example how is small manual from support area can solve big user's problem

02-19-2008, 16:47	#11 (permalink)
rajabrotherscom No Life Poster Join Date: Jun 2005 Location: rajabrothers communications Age: 43 Posts: 1,711 Member: 155773 Status: Offline Sonork: 1606514 Thanks Meter: 87	a.o.a and hi to all today i unlock stl100 ok without any problem flash with Fly-SLT100_Hummer-HT1_SLT100_HMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W 06_36_MP_V36_M3.00R_2007-07-26_En_Ru_Ua.B4M hare is opration log............... COM9 selected Device: Fly SLT100 Checking data, wait... Action: write NAND flash "format ffs" active write: Firmware skip: Customization/Language Pack skip: Customization skip: Eeprom/ffs source data: page only identification#1 protocol ver: 04 ver. sw1: SLT100_HMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_3 6_MP_V36.BIN ver. sw2: MAUI.06A.W06.36.MP.V36, 00000000 ffs offset/size: 02000000/02000000 id-page1 Ok nfi area detection finished: Ok Boot... Press and HOLD Power button now ! baud autodetection active 19200 Connecting, wait... Initializing[6228:8A02:8A02]... CPU: MT6228 chip: 0031:0000:0101 boot step size: 0400 Release Power button now ! Boot Done Initialize... version: 3.1 loader: 3.1.02 NAND: Hynix HY27XS08121M 512+16 32 pages, 66Mb NAND id: AD76AD76 page size: 200+10 pages/block: 20 bits i/o: 08 address cycles: 04 blocks: 1000 ram size: 00800000 NOR: 0000:000000000000 [00000000] NAND: 00AD:007600AD0076 [04200000] NOR chip is not installed Initialize Done Set baud... 921600 Set baud Done Identification... reading structure area... detecting structure... source data: page+spare converting data... done 0x00010000 bytes identification#1 protocol ver: 04 ver. sw1: SLT100_UKMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_ 36_MP_V36.BIN ver. sw2: MAUI.06A.W06.36.MP.V36, 00000000 ffs offset/size: 02000000/02000000 id-page1 Ok nfi area detection finished: Ok identification#1 structure: 2nd [standard] generation Identification Done Manipulation... Manipulation Done Finalization... Finalization Done Write... write core area 1 of 2... write core area 2 of 2... formatting... .................................................. .................................................. Write Done Finished, time used: 418 sec Remove/Install battery now ! thanx infinity team ...................... br raja

06-26-2008, 16:58	#12 (permalink)
mughalG No Life Poster Join Date: Jul 2006 Location: U-A-E Dubai---->Pak Posts: 2,906 Member: 315789 Status: Offline Thanks Meter: 3,428	SLT100 unlock successfully COM3 [VCP0] selected Device: Fly-SLT100 Checking data, wait... Action: write NAND flash write: Firmware skip: Customization/Language Pack skip: Customization skip: Eeprom/ffs source data: page only identification#1 protocol ver: 04 ver. sw1: SLT100_HMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_3 6_MP_V36.BIN ver. sw2: MAUI.06A.W06.36.MP.V36, 00000000 ffs offset/size: 02000000/02000000 id-page1 Ok nfi area detection finished: Ok Boot... Press and HOLD Power button now ! 19200 fixed Connecting, wait... Initializing[6228:8A02:8A02]... CPU: MT6228 chip: 0031:0000:0101 boot step size: 0400 Release Power button now ! Boot Done Initialize... version: 3.0207 loader: 3.748.0 NAND: Hynix HY27XS08121M 512+16 32 pages, 66Mb NAND id: AD76AD76 page size: 200+10 pages/block: 20 bits i/o: 08 address cycles: 04 blocks: 1000 ram size: 00800000 NOR: 0000:000000000000 [00000000] NAND: 00AD:007600AD0076 [04200000] NOR chip is not installed Initialize Done Set baud... 115200 Set baud Done Identification... reading structure area... detecting structure... source data: page+spare converting data... done 0x00010000 bytes identification#1 protocol ver: 04 ver. sw1: SLT100_UKMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_ 36_MP_V36.BIN ver. sw2: MAUI.06A.W06.36.MP.V36, 00000000 ffs offset/size: 02000000/02000000 id-page1 Ok nfi area detection finished: Ok identification#1 structure: 2nd [standard] generation Identification Done Write... write core area 1 of 2... write core area 2 of 2... Write Done Finished, time used: 2281 sec Remove/Install battery now ! BR mughalG

09-14-2008, 11:32	#13 (permalink)
yasermalik No Life Poster Join Date: Apr 2007 Location: BIRMINGHAM UNITED KINGDOM Age: 34 Posts: 1,030 Member: 488632 Status: Offline Thanks Meter: 391	COM4 [VCP0] selected Device: Fly-SLT100 Checking data, wait... Action: write NAND flash read mode: 01 write: Firmware skip: Customization/Language Pack skip: Customization skip: Eeprom/ffs source data: page only identification#1 protocol ver: 04 ver. sw1: SLT100_HMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_3 6_MP_V36.BIN ver. sw2: MAUI.06A.W06.36.MP.V36, 00000000 ffs offset/size: 02000000/02000000 id-page1 Ok nfi area detection finished: Ok Boot... Press and HOLD Power button now ! 19200 fixed Connecting, wait... Initializing[6228:8A02:8A02]... CPU: MT6228 chip: 0031:0000:0101 boot step size: 0400 Release Power button now ! Boot Done Initialize... version: 3.0207 loader: 3.748.0 NAND: Hynix HY27XS08121M 512+16 32 pages, 66Mb NAND id: AD76AD76 page size: 200+10 pages/block: 20 bits i/o: 08 address cycles: 04 blocks: 1000 ram size: 00800000 NOR: 0000:000000000000 [00000000] NAND: 00AD:007600AD0076 [04200000] NOR chip is not installed Initialize Done Set baud... 115200 Set baud Done Identification... reading structure area... detecting structure... source data: page only identification#1 protocol ver: 04 ver. sw1: SLT100_UKMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_ 36_MP_V36.BIN ver. sw2: MAUI.06A.W06.36.MP.V36, 00000000 ffs offset/size: 02000000/02000000 id-page1 Ok nfi area detection finished: Ok identification#1 structure: 2nd [standard] generation Identification Done Write... write core area 1 of 2... write core area 2 of 2... Write Done Finished, time used: 2279 sec Remove/Install battery now ! BR YASERMALIK EMAIL [email protected] MOBILE .03436360983

09-16-2008, 21:36	#14 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Thank you very much for test report ! Each test report with attached logs is very important for us so we can see how is Infinity-Box software works and what is possible problems and successfully done work.

09-16-2008, 22:17	#15 (permalink)
Softway No Life Poster Join Date: May 2005 Posts: 2,681 Member: 143889 Status: Offline Sonork: 100.1584685 Thanks Meter: 341	tested on more then 10pcs.. all unlocked without any problem. just had to flash the phone. thats all...