GSM-Forum

GSM-Forum (http://forum.gsmhosting.com/vbb/)
-   Infinity-Box (http://forum.gsmhosting.com/vbb/f296/)
-   -   can i Unlock FLY SLT100 with Infinity ? (http://forum.gsmhosting.com/vbb/f296/can-i-unlock-fly-slt100-infinity-490737/)

.:Morpheus:. 01-15-2008 19:56

can i Unlock FLY SLT100 with Infinity ?
 
hi

can i Unlock FLY MODEL : SLT100 with Infinity
on the back of the phone is writin Model SLT100 not Fly-SLT100 ?

if yes witch pinout i use please Thanks

InfinitySupport 01-15-2008 20:10

Hello,

How about to look three lines down ?
http:///vbb/showthread.php?t=469930

.:Morpheus:. 01-15-2008 20:16

Quote:

Originally Posted by InfinitySupport (Post 3018692)
Hello,

How about to look three lines down ?
http:///vbb/showthread.php?t=469930

yeah its touch sceen mate so i can use pinout the one in infinity only RX TX GND no need to charge and +bat ?

Thanks

InfinitySupport 01-16-2008 00:25

Hello,

You need only Rx/Tx/Gnd

shaqmans 01-22-2008 13:21

Hello,
I bought a mobile phone which is Fly SLT100 but dont know how to unlock it? Any ideas please help.
Thanks.

InfinitySupport 01-22-2008 15:16

Quote:

Originally Posted by shaqmans (Post 3033925)
Hello,
I bought a mobile phone which is Fly SLT100 but dont know how to unlock it? Any ideas please help.
Thanks.

How about to read something before ask questions ?

f.e. this: http:///vbb/showthread.php?t=469930

MSCOMMUNICATION 02-04-2008 15:07

Help Fly Slt 100
 
I TRY TO UNLOCK BUT NO ALL MATHORD USE BUT ;)

COM29 [Serial2] selected
Action: user code
unlock method: smart fast
Model: Fly SLT100
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6228:8A02:8A02]...
CPU: MT6228
chip: 0031:0000:0101
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6228,E02
Date: 2004.07.02
Version: 1.0
Version: MAUI.06A.W06.36.MP.V36
Version: EZIO28_06A_HW
42 byte(s) read
imei: 35820901027682
connection Ok
145 byte(s) read
reading data...
reading data#2...
reading data#3...
building new data...
writing data...
user code set to: 0000
Finished, time used: 23 sec
Remove/Install battery now !

PLZ HELP

MS COMMUNICATION PAKISTAN

InfinitySupport 02-05-2008 02:41

@MSCOMMUNICATION
How about to look 5 messages up ?
http:///vbb/showpo...92&postcount=2

MSCOMMUNICATION 02-05-2008 12:21

Thanks infinity team
 
I successfully unlock FLY SLT100 with full flash in support area, no need unlock after flash set will be auto unlocked

Fly-SLT100_Hummer-HT1_SLT100_HMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W 06_36_MP_V36_M3.00R_2007-07-26_En_Ru_Ua.B4M

Thanks infinity team:cool:

MS COMMUNICATION
MOBILE PARTS&SOFTWARE
SHOP#87 &94 1ST FLOOR SARHAD PLAZA LIAQAT ROAD RAWALPINDI PAKISTAN
OFFICE 0515558766
MOBILE 03009786768
EMAIL [email protected]
[email protected] [email protected]

InfinitySupport 02-06-2008 06:05

Hello,

Glad to hear about good results !
It'a a good example how is small manual from support area can solve big user's problem ;)

rajabrotherscom 02-19-2008 15:47

a.o.a and hi to all

today i unlock stl100 ok without any problem flash with Fly-SLT100_Hummer-HT1_SLT100_HMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W 06_36_MP_V36_M3.00R_2007-07-26_En_Ru_Ua.B4M

hare is opration log...............


COM9 selected
Device: Fly SLT100
Checking data, wait...
Action: write NAND flash
"format ffs" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
source data: page only
identification#1 protocol ver: 04
ver. sw1: SLT100_HMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_3 6_MP_V36.BIN
ver. sw2: MAUI.06A.W06.36.MP.V36, 00000000
ffs offset/size: 02000000/02000000
id-page1 Ok
nfi area detection finished: Ok
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6228:8A02:8A02]...
CPU: MT6228
chip: 0031:0000:0101
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
version: 3.1
loader: 3.1.02
NAND: Hynix HY27XS08121M 512+16 32 pages, 66Mb
NAND id: AD76AD76
page size: 200+10
pages/block: 20
bits i/o: 08
address cycles: 04
blocks: 1000
ram size: 00800000
NOR: 0000:000000000000 [00000000]
NAND: 00AD:007600AD0076 [04200000]
NOR chip is not installed
Initialize Done
Set baud...
921600
Set baud Done
Identification...
reading structure area...
detecting structure...
source data: page+spare
converting data...
done 0x00010000 bytes
identification#1 protocol ver: 04
ver. sw1: SLT100_UKMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_ 36_MP_V36.BIN
ver. sw2: MAUI.06A.W06.36.MP.V36, 00000000
ffs offset/size: 02000000/02000000
id-page1 Ok
nfi area detection finished: Ok
identification#1 structure: 2nd [standard] generation
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
write core area 1 of 2...
write core area 2 of 2...
formatting...
.................................................. .................................................. Write Done
Finished, time used: 418 sec
Remove/Install battery now !


thanx infinity team ......................

br raja:cool:

mughalG 06-26-2008 16:58

SLT100 unlock successfully

COM3 [VCP0] selected
Device: Fly-SLT100
Checking data, wait...
Action: write NAND flash
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
source data: page only
identification#1 protocol ver: 04
ver. sw1: SLT100_HMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_3 6_MP_V36.BIN
ver. sw2: MAUI.06A.W06.36.MP.V36, 00000000
ffs offset/size: 02000000/02000000
id-page1 Ok
nfi area detection finished: Ok
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6228:8A02:8A02]...
CPU: MT6228
chip: 0031:0000:0101
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
version: 3.0207
loader: 3.748.0
NAND: Hynix HY27XS08121M 512+16 32 pages, 66Mb
NAND id: AD76AD76
page size: 200+10
pages/block: 20
bits i/o: 08
address cycles: 04
blocks: 1000
ram size: 00800000
NOR: 0000:000000000000 [00000000]
NAND: 00AD:007600AD0076 [04200000]
NOR chip is not installed
Initialize Done
Set baud...
115200
Set baud Done
Identification...
reading structure area...
detecting structure...
source data: page+spare
converting data...
done 0x00010000 bytes
identification#1 protocol ver: 04
ver. sw1: SLT100_UKMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_ 36_MP_V36.BIN
ver. sw2: MAUI.06A.W06.36.MP.V36, 00000000
ffs offset/size: 02000000/02000000
id-page1 Ok
nfi area detection finished: Ok
identification#1 structure: 2nd [standard] generation
Identification Done
Write...
write core area 1 of 2...
write core area 2 of 2...
Write Done
Finished, time used: 2281 sec
Remove/Install battery now !
BR mughalG

yasermalik 09-14-2008 11:32

COM4 [VCP0] selected
Device: Fly-SLT100
Checking data, wait...
Action: write NAND flash
read mode: 01
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
source data: page only
identification#1 protocol ver: 04
ver. sw1: SLT100_HMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_3 6_MP_V36.BIN
ver. sw2: MAUI.06A.W06.36.MP.V36, 00000000
ffs offset/size: 02000000/02000000
id-page1 Ok
nfi area detection finished: Ok
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6228:8A02:8A02]...
CPU: MT6228
chip: 0031:0000:0101
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
version: 3.0207
loader: 3.748.0
NAND: Hynix HY27XS08121M 512+16 32 pages, 66Mb
NAND id: AD76AD76
page size: 200+10
pages/block: 20
bits i/o: 08
address cycles: 04
blocks: 1000
ram size: 00800000
NOR: 0000:000000000000 [00000000]
NAND: 00AD:007600AD0076 [04200000]
NOR chip is not installed
Initialize Done
Set baud...
115200
Set baud Done
Identification...
reading structure area...
detecting structure...
source data: page only
identification#1 protocol ver: 04
ver. sw1: SLT100_UKMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_ 36_MP_V36.BIN
ver. sw2: MAUI.06A.W06.36.MP.V36, 00000000
ffs offset/size: 02000000/02000000
id-page1 Ok
nfi area detection finished: Ok
identification#1 structure: 2nd [standard] generation
Identification Done
Write...
write core area 1 of 2...
write core area 2 of 2...
Write Done
Finished, time used: 2279 sec
Remove/Install battery now !
BR YASERMALIK
EMAIL [email protected]
MOBILE .03436360983

InfinitySupport 09-16-2008 21:36

Thank you very much for test report !

Each test report with attached logs is very important for us so we can see how is Infinity-Box
software works and what is possible problems and successfully done work.

Softway 09-16-2008 22:17

tested on more then 10pcs.. all unlocked without any problem. just had to flash the phone. thats all...


All times are GMT +1. The time now is 18:09.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.28974 seconds with 5 queries

SEO by vBSEO