can't unlock sony-ericsson t132 - GSM-Forum

fadhel · 01-05-2009, 19:36

COM27 [VCP0] selected
module v1.30
Device: Sony-Ericsson-J132
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot fail
error: operation failed
Finished, time used: 48 sec
Remove/Install battery now !

PS: same error when trying to read/write flash and unlock.
cable is good ,pressed long time to power ...
any help?
thanks.

InfinityN · 01-05-2009, 19:59

Hello,

1. Try to adjust port settings:

2. It may be new hardware that is not supported yet

fadhel · 01-06-2009, 07:03

thank's but not helped,
any other idea please ??

InfinityN · 01-06-2009, 10:15

Hello,

2. It may be new hardware that is not supported yet

GmmalGSM · 01-07-2009, 23:50

thanx infinity team really it is the best box
but it gived me some error beacause iam making acable
but it unlocked

COM3 [VCP0] selected
module v1.30
Device: Sony-Ericsson-J132
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection ...
Check connection done
Set baud ...
115200
Set baud done
Check hardware ...
flash: 2088C0FFFFFFFF:2088C000000000
flash: ST Intel std [def 007Fx010000 0008x002000] 8Mb
Check hardware done
Read data ...
reading Sony-Ericsson-J132_eeprom_calibration-1...
warning: wrong cs at 0x067F1000, retry...
read error recovered
warning: wrong cs at 0x067F6800, retry...
read error recovered
warning: wrong cs at 0x067FE000, retry...
read error recovered
file saved: C:\Documents and Settings\zerofone\Desktop\New Folder (2)\Sony-Ericsson-J132_eeprom_calibration-1_20090108-004240.80E.bin
Read data done
Check data ...
Check data done
Write ...
.....
warning: wrong cs at 0x06141000, retry...
read error recovered
flash: 2088C0FFFFFFFF:2088C000000000
Write: simlock
Write done
Finished, time used: 90 sec

**InfinitySupport** · 01-08-2009, 01:35

Hello,

If errors was recovered there is no any problems.
To avoid communication errors you can try to make your cable wires shorter.

01-05-2009, 19:36	#1 (permalink)
fadhel No Life Poster Join Date: Sep 2003 Location: Here Posts: 1,370 Member: 39196 Status: Offline Thanks Meter: 126	can't unlock sony-ericsson t132 COM27 [VCP0] selected module v1.30 Device: Sony-Ericsson-J132 "advanced chip detection" active Action: unlock Checking data, wait... Boot ... Phone should be Switched OFF ! Press Power button now ! rom version: 0502 Connecting... booting... finalizing... Boot fail error: operation failed Finished, time used: 48 sec Remove/Install battery now ! PS: same error when trying to read/write flash and unlock. cable is good ,pressed long time to power ... any help? thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
i unlock sony ericsson T200 with 6.52	UHK	Sony Ericsson	4	06-19-2010 10:13
Cant unlock Sony-Ericsson-J132	rajhcl0	Infinity-Box	3	03-29-2010 18:28
hlp me for unlock sony ericsson T200	Mastersouth	Phone Unlocking Codes & Maps	1	07-10-2003 11:03
unlock Sony-Ericsson T-300	Edufernandez	Phone Unlocking Codes & Maps	0	06-02-2003 15:41

01-05-2009, 19:59	#2 (permalink)
InfinityN No Life Poster Join Date: Mar 2008 Location: infinity-box Posts: 1,010 Member: 720034 Status: Offline Thanks Meter: 213	Hello, 1. Try to adjust port settings: 2. It may be new hardware that is not supported yet

01-06-2009, 07:03	#3 (permalink)
fadhel No Life Poster Join Date: Sep 2003 Location: Here Posts: 1,370 Member: 39196 Status: Offline Thanks Meter: 126	thank's but not helped, any other idea please ??

01-06-2009, 10:15	#4 (permalink)
InfinityN No Life Poster Join Date: Mar 2008 Location: infinity-box Posts: 1,010 Member: 720034 Status: Offline Thanks Meter: 213	Hello, 2. It may be new hardware that is not supported yet

01-07-2009, 23:50	#5 (permalink)
GmmalGSM No Life Poster Join Date: Apr 2007 Posts: 800 Member: 1092395 Status: Offline Sonork: 100.1582829 Thanks Meter: 591	thanx infinity team really it is the best box but it gived me some error beacause iam making acable but it unlocked COM3 [VCP0] selected module v1.30 Device: Sony-Ericsson-J132 "advanced chip detection" active Action: unlock Checking data, wait... Boot ... Phone should be Switched OFF ! Press Power button now ! rom version: 0502 Connecting... booting... finalizing... Boot done Check connection ... Check connection done Set baud ... 115200 Set baud done Check hardware ... flash: 2088C0FFFFFFFF:2088C000000000 flash: ST Intel std [def 007Fx010000 0008x002000] 8Mb Check hardware done Read data ... reading Sony-Ericsson-J132_eeprom_calibration-1... warning: wrong cs at 0x067F1000, retry... read error recovered warning: wrong cs at 0x067F6800, retry... read error recovered warning: wrong cs at 0x067FE000, retry... read error recovered file saved: C:\Documents and Settings\zerofone\Desktop\New Folder (2)\Sony-Ericsson-J132_eeprom_calibration-1_20090108-004240.80E.bin Read data done Check data ... Check data done Write ... ..... warning: wrong cs at 0x06141000, retry... read error recovered flash: 2088C0FFFFFFFF:2088C000000000 Write: simlock Write done Finished, time used: 90 sec

01-08-2009, 01:35	#6 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, If errors was recovered there is no any problems. To avoid communication errors you can try to make your cable wires shorter.