CAT B100 read fw fail (MT6276W) - GSM-Forum

dazexy · 08-26-2016, 14:25

Dear Support!

Please add support for read fw for MT6276W

Here is log:

Quote:

Chinese Miracle II [MTK module] v 1.54

Operation : Read Flash [ v1.54 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 243 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 1FFF
BB_CPU_HW : 1FFF
BB_CPU_SW : 0000
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MTxxx
[ERROR] :
BB_CPU_SN : UNKNOW [ READ ERROR ]
BROM Protocol Version : FF
Setting...
Setting done , result code 0x0000
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW NOT Found

Boot Error!

Operation Failed
Elapsed: 00:00:39
Reconnect Power/Cable!

Many Thanx for improving CM2 for us!

dazexy

blinet · 08-28-2016, 18:31

hello, can you try to read flash with cm2mtk 1.55 ? i have one dead cat b100 after bad flashing with miracle.. Thanks!

dazexy · 08-28-2016, 19:35

Quote:

Originally Posted by blinet

hello, can you try to read flash with cm2mtk 1.55 ? i have one dead cat b100 after bad flashing with miracle.. Thanks!

Send me a pm tomorrow. A hope we have not returned this device to customer. If we have still this phone, I make a backup and send to you. But please pm me, I can forget everything easily :-)

dazexy · 08-29-2016, 11:08

I dont know the phone is good or not (HW), becouse it is screen damaged.

Here is the dump: Downloading from DiskStation

Quote:

Operation : Read Flash [ v1.55 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 243 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6276
BB_CPU_HW : CB00
BB_CPU_SW : 0101
BB_CPU_SB : 8B00
BB_CPU_NM : [MediaTek] MT6276_S0000
BROM Protocol Version : FF
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x80
SOC_VERIFY : 0xC1
BOOT_STYLE : NAND_FLASH_BOOT
NAND Flash IC initialized
FLASH_VEN : 0x0068 , [ESMT] FM64D1G12A_5BAGE
FLASH_DIE0 : 00C8 00B1 0080 0055
FLASH_DIE1 : 0040 007F 007F 007F
FLASH_LEN : 0x08000000
INT_RAM : 0x00015000
EXT_RAM : 0x04000000
Reading Flash Content now ...
#64256 : Data CRC Error : FFAA , 70EB

Error while read FW! Send report to support!

Operation Failed
Elapsed: 00:23:18
Reconnect Power/Cable!

wbr

dazexy

JayDi · 08-29-2016, 11:34

@dazexy, something wrong with cable or system. It not should take time longer, than 2-3 minutes for read flash.
Can try on another cable/updated drivers?

dazexy · 08-29-2016, 11:45

The reading itself is about 2-3 minutes, but at 98% it waits a long time 10-20 minutes and the process fail. With other tool the reading is also fail at the end, but not waits so long.

Anyway i try with other cable. (under win7 and XP have i tested.)

dazexy · 08-29-2016, 11:50

Quote:

Originally Posted by JayDi

@dazexy, something wrong with cable or system. It not should take time longer, than 2-3 minutes for read flash.
Can try on another cable/updated drivers?

i have used drivers from infinity support (downloaded today).
Need i use newer driver from other place?

JayDi · 08-29-2016, 11:56

Quote:

Originally Posted by dazexy

i have used drivers from infinity support (downloaded today).
Need i use newer driver from other place?

Quote:

Originally Posted by dazexy

The reading itself is about 2-3 minutes, but at 98% it waits a long time 10-20 minutes and the process fail. With other tool the reading is also fail at the end, but not waits so long.

Anyway i try with other cable. (under win7 and XP have i tested.)

Thanks for the report. I will update reading.
Was interest to know why that happen.

Will convert current redout to FW and update CM2 DB's.

dazexy · 09-16-2016, 12:23

Greeting!

Here is the current log:

Quote:

Chinese Miracle II [MTK module] v 1.56

Operation : Read Flash [ v1.56 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 243 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6276
BB_CPU_HW : CB00
BB_CPU_SW : 0101
BB_CPU_SB : 8B00
BB_CPU_NM : [MediaTek] MT6276_S0000
BROM Protocol Version : FF
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x80
SOC_VERIFY : 0xC1
BOOT_STYLE : NAND_FLASH_BOOT
NAND Flash IC initialized
FLASH_VEN : 0x0068 , [ESMT] FM64D1G12A_5BAGE
FLASH_DIE0 : 00C8 00B1 0080 0055
FLASH_DIE1 : 0040 007F 007F 007F
FLASH_LEN : 0x08000000
INT_RAM : 0x00015000
EXT_RAM : 0x04000000
Reading Flash Content now ...

Read Ok, make firmware now ...
Read failed! Structure determine not done! Send report and MT6276_13704E404DA7_Infinity.bin to support!

Done!
Elapsed: 00:01:04
Reconnect Power/Cable!

Here is the dump:

Downloading from DiskStation

Thanx for your work!

dazexy

JayDi · 09-16-2016, 17:28

Please, upload to another sharing.
I can't download from that diskstation at all ( previous your link was also improssible to download )

dazexy · 09-16-2016, 17:35

Quote:

Originally Posted by JayDi

Please, upload to another sharing.
I can't download from that diskstation at all ( previous your link was also improssible to download )

this is the today one:

MT6276_13704E404DA7_Infinity - Download - 4shared

dazexy · 09-16-2016, 17:39

This One is readed with previos version (1.55):

MT6276_0A6EC91EA16B_Infinity - Download - 4shared

Thanx for your help!

WBR

dazexy

JayDi · 09-16-2016, 17:45

Got it!
Thanks, will be enabled in next version.

blinet · 09-22-2016, 13:05

any news with flash reading/writing ? tnx

JayDi · 09-22-2016, 13:10

That device have certificate. Looking for possible ways. Without sample on hands it little bit hard.

08-29-2016, 11:34	#5 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	@dazexy, something wrong with cable or system. It not should take time longer, than 2-3 minutes for read flash. Can try on another cable/updated drivers?

08-29-2016, 11:45	#6 (permalink)
dazexy No Life Poster Join Date: Jul 2002 Location: Hungary, Győr Age: 46 Posts: 558 Member: 13569 Status: Offline Sonork: 1619596 Thanks Meter: 72	The reading itself is about 2-3 minutes, but at 98% it waits a long time 10-20 minutes and the process fail. With other tool the reading is also fail at the end, but not waits so long. Anyway i try with other cable. (under win7 and XP have i tested.)

09-16-2016, 17:28	#10 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Please, upload to another sharing. I can't download from that diskstation at all ( previous your link was also improssible to download )

09-16-2016, 17:39	#12 (permalink)
dazexy No Life Poster Join Date: Jul 2002 Location: Hungary, Győr Age: 46 Posts: 558 Member: 13569 Status: Offline Sonork: 1619596 Thanks Meter: 72	This One is readed with previos version (1.55): MT6276_0A6EC91EA16B_Infinity - Download - 4shared Thanx for your help! WBR dazexy

09-16-2016, 17:45	#13 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Got it! Thanks, will be enabled in next version.

09-22-2016, 13:05	#14 (permalink)
blinet No Life Poster Join Date: Nov 2002 Location: Slovakia Age: 40 Posts: 1,060 Member: 17405 Status: Offline Thanks Meter: 345	any news with flash reading/writing ? tnx

09-22-2016, 13:10	#15 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	That device have certificate. Looking for possible ways. Without sample on hands it little bit hard.