cect F200+ pinout plz - GSM-Forum

asco777 · 06-04-2008, 20:55

hello
help for this pinout plz cect F200+
connector 1...18
gnd pin 18
regard

asco777 · 06-05-2008, 14:15

urgentttttttttttttttt

**InfinitySupport** · 06-05-2008, 18:47

Hello,

Where is Charge pin at phone connector ?

InfinityHelp · 06-05-2008, 21:52

hello!

is this MT62xx based phone?

asco777 · 06-06-2008, 09:46

hello
yes it is MT6226 cpu

InfinityHelp · 06-06-2008, 11:03

hello!

do you have pinfinder? if no- i can advice how to find pinout by multimeter

asco777 · 06-07-2008, 16:15

I have pinfinder but it can't detect

too many retries
too many redtries
connection w/adapter lopst during set tx as pin 7
failed to detect pins

InfinityHelp · 06-08-2008, 11:58

hello!

probably this phone use test points on PCB

Sudan-Mobiles · 09-04-2008, 13:42

software version: 1.14
cable type: 1x18 (L18A)
platform: PMB: Infineon e-gold
searching adapter at COM7...
adapter found, version: 2000
pins: 18, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
s-gold2 (C0)
result: Rx:13 Tx:2
time required: 75 sec
Power On !

asco777 · 09-04-2008, 21:21

sorry my own is not mtcpu It is spreatrum cpu and I find pinout with pinfinder connec tor 1..18 RX12 TX 13 but I can't make unlock operation because infinity does't support this
any way I hear about SPD 2.09 but I don't undertand

06-04-2008, 20:55	#1 (permalink)
asco777 Freak Poster Join Date: Feb 2008 Posts: 384 Member: 702472 Status: Offline Thanks Meter: 18	cect F200+ pinout plz hello help for this pinout plz cect F200+ connector 1...18 gnd pin 18 regard

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pla spiderman team cect f200+ türkish flash	gsmsos.net	SpiderMan	6	03-06-2009 21:43
cect f200-6600R	geans	SpiderMan	4	10-19-2008 19:25
Cect f200+	ten_sev	SpiderMan	1	09-16-2008 10:53
CECT N88 Pinouts Plz Help	Tahir Riaz	Chinese Models & Cloned Phones	3	07-24-2008 15:49
CECT F200+ cant find pinouts	speedstarrr	MC-Tool	0	05-16-2008 14:31

06-05-2008, 14:15	#2 (permalink)
asco777 Freak Poster Join Date: Feb 2008 Posts: 384 Member: 702472 Status: Offline Thanks Meter: 18	urgentttttttttttttttt

06-05-2008, 18:47	#3 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, Where is Charge pin at phone connector ?

06-05-2008, 21:52	#4 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! is this MT62xx based phone?

06-06-2008, 09:46	#5 (permalink)
asco777 Freak Poster Join Date: Feb 2008 Posts: 384 Member: 702472 Status: Offline Thanks Meter: 18	hello yes it is MT6226 cpu

06-06-2008, 11:03	#6 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! do you have pinfinder? if no- i can advice how to find pinout by multimeter

06-07-2008, 16:15	#7 (permalink)
asco777 Freak Poster Join Date: Feb 2008 Posts: 384 Member: 702472 Status: Offline Thanks Meter: 18	I have pinfinder but it can't detect too many retries too many redtries connection w/adapter lopst during set tx as pin 7 failed to detect pins

06-08-2008, 11:58	#8 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! probably this phone use test points on PCB

09-04-2008, 13:42	#9 (permalink)
Sudan-Mobiles No Life Poster Join Date: May 2006 Location: Sudan Posts: 1,672 Member: 281857 Status: Offline Thanks Meter: 214	software version: 1.14 cable type: 1x18 (L18A) platform: PMB: Infineon e-gold searching adapter at COM7... adapter found, version: 2000 pins: 18, plain power cycles: 1 activation cycles: 10 power-off delay: 20 start Rx/Tx: 1/1 Loading configuration... Initializing... Press and HOLD phone Power button now ! detecting pins... s-gold2 (C0) result: Rx:13 Tx:2 time required: 75 sec Power On !

09-04-2008, 21:21	#10 (permalink)
asco777 Freak Poster Join Date: Feb 2008 Posts: 384 Member: 702472 Status: Offline Thanks Meter: 18	sorry my own is not mtcpu It is spreatrum cpu and I find pinout with pinfinder connec tor 1..18 RX12 TX 13 but I can't make unlock operation because infinity does't support this any way I hear about SPD 2.09 but I don't undertand