Cect V329 - cannot detect pin with Pin-finder - GSM-Forum

loukandr · 10-16-2008, 20:20

I'm trying to detect pins with pin-finder in order to read rom but pinfinder continually fails to detect pins! It is a Chinese phone.

You can have a look of it here:
http://www.youtube.com/watch?v=wRO_b9hvRWs

Can somebody help?

loukandr · 10-17-2008, 17:09

Anybody?? Infinityhelp please help! Why is the phone not recognised?

loukandr · 10-20-2008, 19:00

Quote:

Originally Posted by loukandr

I'm trying to detect pins with pin-finder in order to read rom but pinfinder continually fails to detect pins! It is a Chinese phone.

You can have a look of it here:
http://www.youtube.com/watch?v=wRO_b9hvRWs

Can somebody help?

Why is this phone not recognised by pinfinder?

**InfinitySupport** · 10-20-2008, 20:33

Hello,

Did you tried to find RX and TX at phone PCB ?

Did you tried to set \"Finder activation tries\" value to 15 or 20 ?

loukandr · 10-20-2008, 20:54

Quote:

Originally Posted by InfinitySupport

Hello,

Did you tried to find RX and TX at phone PCB ?

Do I have to open the phone to do this? I haven't done it before.

Quote:

Did you tried to set \"Finder activation tries\" value to 15 or 20 ?

No, I didn't. Will it change something?

InfinityHelp · 10-21-2008, 10:12

Quote:

Originally Posted by loukandr

Do I have to open the phone to do this? I haven't done it before.

No, I didn't. Will it change something?

hello!

sometimes, if pinout can not be found, you must set "activation tries" to greater, then default value. for example from my experience: iFOE P168i Finder activation tries below 10 (i had 7) did not detect pinout

loukandr · 10-21-2008, 20:41

Quote:

Originally Posted by InfinityHelp

hello!

sometimes, if pinout can not be found, you must set "activation tries" to greater, then default value. for example from my experience: iFOE P168i Finder activation tries below 10 (i had 7) did not detect pinout

I tried every single method (even 20 activation tries) but it still fails.
Any other suggestion?

InfinityHelp · 10-21-2008, 22:04

hello!

is this phone is based on MT62xx MCU ?
maybe it is spreadtrum or else?

loukandr · 10-21-2008, 22:12

Quote:

Originally Posted by InfinityHelp

hello!

is this phone is based on MT62xx MCU ?
maybe it is spreadtrum or else?

When connecting to USB while phone is switched on, I choose webcam mode and PC recognises it as 6225. Thus, it must be MT62xx CPU.
I tried other CPUs in LPE as well just in case with no success.

InfinityHelp · 10-21-2008, 23:14

hello!

in this case this means that this phone doesent hold tx/rx in system connector

loukandr · 10-21-2008, 23:25

Quote:

Originally Posted by InfinityHelp

hello!

in this case this means that this phone doesent hold tx/rx in system connector

So you mean that there is no way to detect pinout?

InfinityHelp · 10-22-2008, 15:44

hello!

you must disassemble phone and look for test points.
take open cable from pinifnder and solder all wires to those test points.
which colur goes to which test point- is not important.
attach battery, run pinout search again

loukandr · 10-22-2008, 17:33

Quote:

Originally Posted by InfinityHelp

hello!

you must disassemble phone and look for test points.
take open cable from pinifnder and solder all wires to those test points.
which colur goes to which test point- is not important.
attach battery, run pinout search again

Hello!
Which one is the open cable?

Is it the open circuit that you mean (it is not actually a cable) ?

How will I recognise test points when I open the phone?

Are there any photo instructions or more details regarding this procedure somewhere?

InfinityHelp · 10-22-2008, 21:53

hello!

please post photo of your phone PCB, i will check if there is test points

C-Mobile · 01-22-2009, 10:27

pin out on pcb

COM13 [VCP0] selected
module v2.74
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot Off
chip: 0001:F503:0006
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: M.RR9012301.M28102.V1.1.0.0M0820
Version: REBOUND25_GEMINI_HW
detecting structure #2...
5 11 done
67 byte(s) read
imei: 35702001805999
connection Ok
building list...
done
items to clear: 181
warning: wrong packet cs
warning: wrong packet cs
warning: wrong packet cs
items cleared: 179 of 181
building list...
done
items remains: 0
Finished, time used: 39 sec
Remove/Install battery now !

10-16-2008, 20:20	#1 (permalink)
loukandr Junior Member Join Date: May 2008 Posts: 27 Member: 777880 Status: Offline Thanks Meter: 1	Cect V329 - cannot detect pin with Pin-finder I'm trying to detect pins with pin-finder in order to read rom but pinfinder continually fails to detect pins! It is a Chinese phone. You can have a look of it here: http://www.youtube.com/watch?v=wRO_b9hvRWs Can somebody help?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Iphone cect q380 spreadtrum chips cannot detect with pinfinder	MR.PRESIDENT	Infinity-Box	9	11-05-2010 19:17
pin finder cannot detect my china n95 (opel M650)	djloyd	Infinity-Box	8	05-29-2009 20:55
it is possible to detect spreadtrum cpu with pin finder ?	unlock & flash	Infinity-Box	1	03-29-2009 21:00
* Cannot Detect Em325 With Scout *	moni108	Scout	2	02-02-2009 10:42
cect q380 can't find pin outs with pin finder	kiran	Infinity-Box	4	04-09-2008 09:12

10-17-2008, 17:09	#2 (permalink)
loukandr Junior Member Join Date: May 2008 Posts: 27 Member: 777880 Status: Offline Thanks Meter: 1	Anybody?? Infinityhelp please help! Why is the phone not recognised?

10-20-2008, 20:33	#4 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, Did you tried to find RX and TX at phone PCB ? Did you tried to set \"Finder activation tries\" value to 15 or 20 ?

10-21-2008, 22:04	#8 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! is this phone is based on MT62xx MCU ? maybe it is spreadtrum or else?

10-21-2008, 23:14	#10 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! in this case this means that this phone doesent hold tx/rx in system connector

10-22-2008, 15:44	#12 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! you must disassemble phone and look for test points. take open cable from pinifnder and solder all wires to those test points. which colur goes to which test point- is not important. attach battery, run pinout search again

10-22-2008, 21:53	#14 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! please post photo of your phone PCB, i will check if there is test points

01-22-2009, 10:27	#15 (permalink)
C-Mobile Freak Poster Join Date: May 2004 Location: Dream Posts: 387 Member: 64496 Status: Offline Thanks Meter: 76	pin out on pcb COM13 [VCP0] selected module v2.74 Action: reset settings Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6225:8A03:8A00]... CPU: MT6225 high speed boot Off chip: 0001:F503:0006 Connecting, wait... Release Power button now ! Phone detected, wait... Hardware: MT6225,E03 Date: 2006.06.14 Version: 1.0 Version: M.RR9012301.M28102.V1.1.0.0M0820 Version: REBOUND25_GEMINI_HW detecting structure #2... 5 11 done 67 byte(s) read imei: 35702001805999 connection Ok building list... done items to clear: 181 warning: wrong packet cs warning: wrong packet cs warning: wrong packet cs items cleared: 179 of 181 building list... done items remains: 0 Finished, time used: 39 sec Remove/Install battery now !