Can't initialize test mode - GSM-Forum

sidramobilecare · 12-30-2008, 13:20

HI

China tv Pda starts but it does not go beyond calibrate screen,
While doing a touchscreen calibration infinity box gives the following error

Can't initialize test mode

COM31 [Serial2] selected
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
error: boot phase#2/1 failed
Can't initialize test mode !
Possible reasons:
1. communication fault, repeat required operation
2. eeprom/ffs serious damaged, use repair eeprom/ffs files or use other unlock/format method
error: operation failed !
Finished, time used: 47 sec
Remove/Install battery now !

Please help

.::BHATTI::. · 12-30-2008, 16:16

it lookd like the cable problem .............. u need to chek the connection again ...........

InfinityHelp · 12-30-2008, 18:50

hello!

yes, this is wrong cable problem

Nadjombe · 02-17-2009, 13:05

You will realise that there's a kind of mobiles that can't be connected even pins solde on the pcb.
I can accept the second reson of box message(cpu damage).
But why a kind of mobiles and what's real solution?

InfinityHelp · 02-18-2009, 15:42

Quote:

Originally Posted by Nadjombe

You will realise that there's a kind of mobiles that can't be connected even pins solde on the pcb.
I can accept the second reson of box message(cpu damage).
But why a kind of mobiles and what's real solution?

hello!

solution for error message which was posted above is only one: find good pinout and assemble good cable

12-30-2008, 13:20	#1 (permalink)
sidramobilecare No Life Poster Join Date: Oct 2008 Location: in your Heart Posts: 525 Member: 888557 Status: Offline Sonork: 100.1608317 Thanks Meter: 34	Can't initialize test mode HI China tv Pda starts but it does not go beyond calibrate screen, While doing a touchscreen calibration infinity box gives the following error Can't initialize test mode COM31 [Serial2] selected Action: touchscreen calibration Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect error: boot phase#2/1 failed Can't initialize test mode ! Possible reasons: 1. communication fault, repeat required operation 2. eeprom/ffs serious damaged, use repair eeprom/ffs files or use other unlock/format method error: operation failed ! Finished, time used: 47 sec Remove/Install battery now ! Please help

02-17-2009, 13:05	#4 (permalink)
Nadjombe No Life Poster Join Date: Sep 2005 Location: near Network Age: 47 Posts: 2,236 Member: 185608 Status: Offline Thanks Meter: 592	Can't initialize test mode You will realise that there's a kind of mobiles that can't be connected even pins solde on the pcb. I can accept the second reson of box message(cpu damage). But why a kind of mobiles and what's real solution? Last edited by InfinityHelp; 02-18-2009 at 14:51.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6280 can't enter test mode for unlocking	Cake	BB5 Box by D.K.	5	03-16-2008 02:44
E50, can't get test mode to unlock..	chmielu_gsm	MT-BOX	5	11-07-2007 13:20
T400 can't enter test mode!!	eddierasta	VLSI, Conexant, Skyworks and Old Models	0	08-02-2005 17:55
Blazer can't enter test mode LG8120 v101	jusluke	Blazer	4	03-22-2005 05:41
Mars MT050 problem: Phone locked.... can't enter Test Mode	mourad_t	Mitsubishi	2	09-23-2003 18:28

12-30-2008, 16:16	#2 (permalink)
.::BHATTI::. No Life Poster Join Date: Nov 2005 Location: .:GSM WORLD:. Posts: 1,945 Member: 203158 Status: Offline Sonork: 100.1592032 Thanks Meter: 358	it lookd like the cable problem .............. u need to chek the connection again ...........

12-30-2008, 18:50	#3 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! yes, this is wrong cable problem