cherry mobile astro dead after flash - GSM-Forum

MARVZ_TG · 04-01-2016, 13:54

hello team

yesterday i have astro pattern problem i try to read boot

i decide to flash because i have backup from other phone

here logs

but phone is dead

but i see other phone version not same from my backup that's why he kill my phone

check my phone picture here and check version

can you revive my phone team or any idea what can i do

JayDi · 04-01-2016, 17:35

Hello.
You need readout FW from same version HW phone. I will check about NAND versions.

MARVZ_TG · 04-01-2016, 18:37

Yes I found same unit and version but the problem is I can't read the firmware can't boot show like my 1st post picture

MARVZ_TG · 04-02-2016, 10:29

hello team still waiting for solution. pls help us

Rex · 04-02-2016, 12:14

Kabayan,
cherry mobile astro with two types of firmware b128k and b256k
i think the one astro dead, you flash with b256k firmware.

MARVZ_TG · 04-02-2016, 12:34

Quote:

Originally Posted by Rex

Kabayan,
cherry mobile astro with two types of firmware b128k and b256k
i think the one astro dead, you flash with b256k firmware.

ah i see

OT: baka my stock rom ka jan kabayan pwde pag usapan natin yan

Rex · 04-02-2016, 12:39

Quote:

Originally Posted by MARVZ_TG

ah i see

OT: baka my stock rom ka jan kabayan pwde pag usapan natin yan

add me @yahoo messenger: [email protected] chat tayo tomorrow

MARVZ_TG · 04-02-2016, 12:41

Quote:

Originally Posted by Rex

add me @yahoo messenger: [email protected] chat tayo tomorrow

thank you kabayan

MARVZ_TG · 05-05-2016, 04:55

STILL WAITING

Operation : Check/Read Info [ v1.17 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 51 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Unknown structure detected! Check correct model selection!

Elapsed: 00:00:50

Reconnect Power/Cable!

bobot · 05-31-2016, 18:29

need this solution too... i got same problem with you boss marvz... up for this

jezshen · 07-09-2016, 07:46

to solve this kind of problem, follow carefully this instruction

first, remove battery and reinsert it back to the phone.
second (TIME INTERVAL IS VERY IMPORTANT)
press and hold power button and AFTER 1 SECOND INTERVAL press and hold volume up and wait till the logo appears...
when the logo appears COUNT 2 SECOND release both power and volume buttons.. WAIT.....
A COMMAND PROMPT WILL APPEAR AND SELECT RESTORE FACTORY SETTINGS..AND GO ON..

BUT IN SOME CASES that wont work.

so if that method doesnt work then go back to setting and enable usb debugging (toggle down notification bar and navigate setting)

now that you have enabled usb debugging, coonect your cp to your pc..wait till the drivers are installed...

open uni-android tool set-up from your pc and select "reboot to recovery" and hit enter..(you can use any android tool that has a rebbot-to-recovery function)
your phone now will reboot to recovery mode..and you know what to do

04-01-2016, 13:54	#1 (permalink)
MARVZ_TG No Life Poster Join Date: Mar 2009 Location: YT - Channel RealFix-GRS.TV Age: 37 Posts: 2,495 Member: 990711 Status: Offline Sonork: 100.1597405 Thanks Meter: 1,779	cherry mobile astro dead after flash hello team yesterday i have astro pattern problem i try to read boot i decide to flash because i have backup from other phone here logs but phone is dead but i see other phone version not same from my backup that's why he kill my phone check my phone picture here and check version can you revive my phone team or any idea what can i do

04-01-2016, 17:35	#2 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Hello. You need readout FW from same version HW phone. I will check about NAND versions.

04-01-2016, 18:37	#3 (permalink)
MARVZ_TG No Life Poster Join Date: Mar 2009 Location: YT - Channel RealFix-GRS.TV Age: 37 Posts: 2,495 Member: 990711 Status: Offline Sonork: 100.1597405 Thanks Meter: 1,779	Yes I found same unit and version but the problem is I can't read the firmware can't boot show like my 1st post picture

04-02-2016, 10:29	#4 (permalink)
MARVZ_TG No Life Poster Join Date: Mar 2009 Location: YT - Channel RealFix-GRS.TV Age: 37 Posts: 2,495 Member: 990711 Status: Offline Sonork: 100.1597405 Thanks Meter: 1,779	hello team still waiting for solution. pls help us

04-02-2016, 12:14	#5 (permalink)
Rex No Life Poster Join Date: Feb 2001 Location: PH Posts: 738 Member: 3468 Status: Offline Thanks Meter: 308	Kabayan, cherry mobile astro with two types of firmware b128k and b256k i think the one astro dead, you flash with b256k firmware.

05-05-2016, 04:55	#9 (permalink)
MARVZ_TG No Life Poster Join Date: Mar 2009 Location: YT - Channel RealFix-GRS.TV Age: 37 Posts: 2,495 Member: 990711 Status: Offline Sonork: 100.1597405 Thanks Meter: 1,779	STILL WAITING Operation : Check/Read Info [ v1.17 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 51 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC7715 Loader NAND v1.1 Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! Unknown structure detected! Check correct model selection! Elapsed: 00:00:50 Reconnect Power/Cable!

05-31-2016, 18:29	#10 (permalink)
bobot Freak Poster Join Date: Sep 2005 Location: Philippines Posts: 312 Member: 176714 Status: Offline Thanks Meter: 33	need this solution too... i got same problem with you boss marvz... up for this

07-09-2016, 07:46	#11 (permalink)
jezshen Junior Member Join Date: Feb 2013 Posts: 5 Member: 1889912 Status: Offline Sonork: 3456345 Thanks Meter: 3	to solve this kind of problem, follow carefully this instruction first, remove battery and reinsert it back to the phone. second (TIME INTERVAL IS VERY IMPORTANT) press and hold power button and AFTER 1 SECOND INTERVAL press and hold volume up and wait till the logo appears... when the logo appears COUNT 2 SECOND release both power and volume buttons.. WAIT..... A COMMAND PROMPT WILL APPEAR AND SELECT RESTORE FACTORY SETTINGS..AND GO ON.. BUT IN SOME CASES that wont work. so if that method doesnt work then go back to setting and enable usb debugging (toggle down notification bar and navigate setting) now that you have enabled usb debugging, coonect your cp to your pc..wait till the drivers are installed... open uni-android tool set-up from your pc and select "reboot to recovery" and hit enter..(you can use any android tool that has a rebbot-to-recovery function) your phone now will reboot to recovery mode..and you know what to do