GSM-Forum - china i9500 mt6572 hang after format..

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)

- - china i9500 mt6572 hang after format.. (https://forum.gsmhosting.com/vbb/f296/china-i9500-mt6572-hang-after-format-1956375/)

china i9500 mt6572 hang after format..

phones comes with pattern locked. formatted with 3 nd 0 FMT settings.. same with UDA+ CACH format.

Code:

Operation : Check / Read Info [ v1.21 ]
 

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 164 ]

Sync...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6572

BB_CPU_HW : CA01

BB_CPU_SW : 8A00

BB_CPU_SB : 0000

BB_CPU_NM : [MediaTek] MT6572_S00

Processing BROM stage

BLVersion : 0x01

SecCfgVal : 0x00000000

BromVersion : 0xFF

BLVersion : 0x01

Preloader Status : Alive

Processing DA stage

DA Select done , sending 

NAND_ID : 00000000000000000000000000000000

eMMC_ID : 45010053454D30344728341F50EF9093

DA Stat : v4.2 on BBID : 0x88

DA Sent. Configure setting now ... 

DA started successuflly

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0045 , OEM : 0100

[eMMC] : FLASH_INF : G40ME

[eMMC] : FLASH_CID : 45010053454D30344728341F50EF9093

[eMMC] : FLASH_LEN : 0x00000000EC000000

INT RAM    : 0x00020000

EXT RAM    : 0x20000000

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 

[AP] : Initial info read Ok!
 

Brand     : alps

ProdName  : GT-I9500

ProdModel : GT-I9500

Device    : GT-I9500

AndroidVer: 4.2.2

MTKxCPU   : MT6572

MTKxPRJ   : ALPS.JB3.MP.V1.2
 

Done!

Elapsed: 00:00:12

Reconnect Power/Cable!

backup attached..

Pattern can be read well without format.

By phone log seems as ok, try make Fix DL.

still hang after fix DL..

Code:

Chinese Miracle II  [MTK module] v 1.21
 

Operation : Fix DL Errors [ v1.21 ]
 

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 164 ]

Sync...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6572

BB_CPU_HW : CA01

BB_CPU_SW : 8A00

BB_CPU_SB : 0000

BB_CPU_NM : [MediaTek] MT6572_S00

Processing BROM stage

BLVersion : 0x01

SecCfgVal : 0x00000000

BromVersion : 0xFF

BLVersion : 0x01

Preloader Status : Alive

Processing DA stage

DA Select done , sending 

NAND_ID : 00000000000000000000000000000000

eMMC_ID : 45010053454D30344728341F50EF9093

DA Stat : v4.2 on BBID : 0x88

DA Sent. Configure setting now ... 

DA started successuflly

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0045 , OEM : 0100

[eMMC] : FLASH_INF : G40ME

[eMMC] : FLASH_CID : 45010053454D30344728341F50EF9093

[eMMC] : FLASH_LEN : 0x00000000EC000000

INT RAM    : 0x00020000

EXT RAM    : 0x20000000

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 
 

Done!

Elapsed: 00:00:15

Reconnect Power/Cable!

Backup seem similar as after format one. Did you format it with CM2 only?

yes.. only with cm2mtk.. still not tried with other tools..

glad.. any possibilities to write back spfb backup..!

When select BIN - choose in extension all or spfb , and write it.

not possible..

Code:

Load File 

Bad file detected!

Hm, seems as something wrong with phone. Make "Factory FW" read and show me log, please.

log of read Factory Firmware..

Code:

Operation : Read Flash [ v1.21 ]
 

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 164 ]

Sync...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6572

BB_CPU_HW : CA01

BB_CPU_SW : 8A00

BB_CPU_SB : 0000

BB_CPU_NM : [MediaTek] MT6572_S00

Processing BROM stage

BLVersion : 0x01

SecCfgVal : 0x00000000

BromVersion : 0xFF

BLVersion : 0x01

Preloader Status : Alive

Processing DA stage

DA Select done , sending 

NAND_ID : 00000000000000000000000000000000

eMMC_ID : 45010053454D30344728341F50EF9093

DA Stat : v4.2 on BBID : 0x88

DA Sent. Configure setting now ... 

DA started successuflly

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0045 , OEM : 0100

[eMMC] : FLASH_INF : G40ME

[eMMC] : FLASH_CID : 45010053454D30344728341F50EF9093

[eMMC] : FLASH_LEN : 0x00000000EC000000

INT RAM    : 0x00020000

EXT RAM    : 0x20000000

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 

Reading Flash Conent now ... 
 

Brand     : alps

ProdName  : GT-I9500

ProdModel : GT-I9500

Device    : GT-I9500

AndroidVer: 4.2.2

MTKxCPU   : MT6572

MTKxPRJ   : ALPS.JB3.MP.V1.2
 

[Read Ok] : preloader_lightning89_wet_jb3.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Error] : Bad EXT data

Looks like unusable file , break!
 

Read Ok , collect info

Brand     : alps

ProdName  : GT-I9500

ProdModel : GT-I9500

Device    : GT-I9500

AndroidVer: 4.2.2

MTKxCPU   : MT6572

MTKxPRJ   : ALPS.JB3.MP.V1.2

File conversion error, file already exists! Saved as default!
 

Done!

Elapsed: 00:03:14

Reconnect Power/Cable!

Send me that files :

Quote:

preloader_lightning89_wet_jb3.bin
MBR
EBR1

I will check and make FSP.

readed factory files attached..

waiting for a fix.. at least revert back to locked state..

There is something wrong with eMMC partitions or modified storage sizes. Will make a fix. In some near version will make it in one button. Working on that now.