china model N91i dead

[zeerik]

hi

China mercal n91i is dead itself (not fallen down) it takes amps with p/s
so i am sure its s/w problem . i need to know in witch way i may repair this phone with infinity (i am new user of infinity so need ur guidelines ) please guide me with steps .

i have charger connector of this model so need pin outs and the way of making cable

[InfinitySupport]

1. you must read FAQ here: http:///vbb/forumdisplay.php?f=296
2. you must read information from C:\Program Files\InfinityBox\Documentation folder
3. you must make "search" in this forum
of course, you must be NOT LAZY before you will start to make steps 1-3

After you have some free time after steps 1-3 you must read this:

Due to a lot of different models with the same name but absolutely different hardware,
bottom connectors and different pinouts we recommend you to make detailed description of model,
attach phone photo, phone bottom connector photo and information about Gnd and Charge pins on phone bottom connector.

After you have this information prepared, please, check the next detailed description how to get pinout for your model:

use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297
if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle.txt
if not helps, please read: http:///vbb/showpo...36&postcount=7
if not helps, please read: http:///vbb/showthread.php?t=433447


"ChineseMiracle": how to repair "reboot with SIM card"

1. make full flash backup for emergency case (use 921000 speed for fast operation)
2. select "safe format method"
3. make "format ffs"
4. remove/install battery
5. press and hold phone "Power" button during 30-40 sec to make phone powered-on
if phone Ok go to step-6
if phone not Ok, go to step 2 and select "complete format method"
6. restore original imei
7. if phone has touchscreen LCD make calibration: click to LCD corners one by one

if still no luck: check phone hardware

[zeerik]

here is pictures please check

[Ramzan]

Its 12 pin conector of N91i phone

key bord top

11 Tx

10 Rx

5 Gnd

enjoy it and post result
Its 100% tested by me

Br

CELL-ZONE
MULTAN PAKISTAN

[zeerik]

thanks sir will you more explane about making cable

will i use charger conecter of this modle ...please guide me if you have photos then please upload here

[Ramzan]

Sorry its not 12 pin conector , Its 10 pin conector
here is pictures please check
I hope this will help u to made a cable

[Ramzan]

Sorry its not 12 pin conector , Its 10 pin conector
here is pictures please check
I hope this will help u to made a cable

[IBMOBILES]

as i remmber it as fallowing

pinout
4: Rx
5: Tx
6: Gnd

hope it will work with you

[mobilegsm30]

Originally Posted by zeerik

here is pictures please check

Hello Ramzan can you give me flash file for Chinese N91i ?