GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 04-04-2011, 16:17   #1 (permalink)
No Life Poster
 
gsmsikar's Avatar
 
Join Date: May 2003
Posts: 5,667
Member: 28004
Status: Offline
Sonork: 100.1601142
Thanks Meter: 770
china n8


i have a china n8 set which was having the problem of sim card registration failed ..

i tried to read the full flash and then change the IMEI but i am not able to read the flash but in the ON mode i can change the imei ..

any of the pinfinder does not work in this set except gpg dragon .

then i try to find the RX TX on the board and soldered the wires directly but i am not able read , or format this set ...


Code:
Action: read/check information
Model: Autodetect 6205-6239 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6235B, E0
Hardware version: SLD35_09A_HW
Software version: SH8-CN3_SW_TOS_V005"
Software date: 2000.00.00
Barcode: MT012345678901234567                                        10

http://forum.gsmhosting.com/vbb/f646...olved-1232303/

how can i read the full flash of this set and then format and change the imei ?
  Reply With Quote
Old 04-04-2011, 18:21   #2 (permalink)
Product Supporter
 
Join Date: May 2005
Location: uae
Posts: 29,245
Member: 148515
Status: Offline
Thanks Meter: 19,531
hello!

so, can you find pinout using GPG dragon?
  Reply With Quote
Old 04-04-2011, 18:40   #3 (permalink)
No Life Poster
 
gsmsikar's Avatar
 
Join Date: May 2003
Posts: 5,667
Member: 28004
Status: Offline
Sonork: 100.1601142
Thanks Meter: 770
yes i can find the pinout by dragon ..

but now i have connected the set soldering RX TX in the PCB ..

how to connect ?
  Reply With Quote
Old 04-05-2011, 06:47   #4 (permalink)
No Life Poster
 
gsmsikar's Avatar
 
Join Date: May 2003
Posts: 5,667
Member: 28004
Status: Offline
Sonork: 100.1601142
Thanks Meter: 770
what should i do to repair this set ?
  Reply With Quote
Old 04-05-2011, 07:52   #5 (permalink)
No Life Poster
 
PASSIONATE_BOYS's Avatar
 
Join Date: Jul 2007
Location: Infinity-Box Support-
Posts: 9,321
Member: 541591
Status: Offline
Sonork: 100.1611509
Thanks Meter: 7,361
Donate money to this user
Select "Autodetect 6228-6268 Nand" option and try again.

Wr.
  Reply With Quote
Old 04-08-2011, 10:12   #6 (permalink)
No Life Poster
 
gsmsikar's Avatar
 
Join Date: May 2003
Posts: 5,667
Member: 28004
Status: Offline
Sonork: 100.1601142
Thanks Meter: 770
done the set only with the latest module v3.29 chinese miracle version ..
now i am checking the set if it is working ok for some time ..

thanks infinity team ..


Code:
==== [4/8/2011 12:12:58 PM] ====
COM9 [Serial2] selected
module  v3.29
Device: Autodetect 6228-6268 NAND
Checking data, wait...
Action: read/check information
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8B00:8A00
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0014]: 0098:00D100900015 [TOSHIBA] TC58NVG0S3AFT
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (115200)...
done
interesting cpu type found: 6235:8B00:8A00
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: SH8-CN3_SW_TOS_V005
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
error: can not read memory: 0FAA:S_FT_READBACK_FAIL
can not read memory, errorcode: 0FAA
it may be problem with current operation
error: last error: 0FAA:S_FT_READBACK_FAIL
Disconnect...
done
Finished, time used: 24 sec
Remove/Install battery now !

==== [4/8/2011 12:13:29 PM] ====
COM9 [Serial2] selected
module  v3.29
Device: Autodetect 6228-6268 NAND
Checking data, wait...
Action: read/check information
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8B00:8A00
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0014]: 0098:00D100900015 [TOSHIBA] TC58NVG0S3AFT
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
interesting cpu type found: 6235:8B00:8A00
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: SH8-CN3_SW_TOS_V005
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: SLD35_09A_BOOTLOADER_V005_MT6235B_SH8-CN3_SW_TOS_V005.bin
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN
project-id: SH8-CN3_SW_TOS_V005, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/06000000
rom info structure: [standard] type (07)
TCL-ID is absent
===>  done
====================
New firmware found (v.3.29, database date: 04.04.2011): 
SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
Disconnect...
done
Finished, time used: 1 min 4 sec
Remove/Install battery now !
In most cases you can read "firmware" instead of "full flash",
it may helps to save a lot of time with the same functionality.
Suggestion: read "firmware" now
Do you want to read "firmware" instead of "full flash" ?

==== [4/8/2011 12:15:16 PM] ====
COM9 [Serial2] selected
module  v3.29
Device: Autodetect 6228-6268 NAND
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8B00:8A00
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0014]: 0098:00D100900015 [TOSHIBA] TC58NVG0S3AFT
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
interesting cpu type found: 6235:8B00:8A00
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: SH8-CN3_SW_TOS_V005
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: SLD35_09A_BOOTLOADER_V005_MT6235B_SH8-CN3_SW_TOS_V005.bin
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN
project-id: SH8-CN3_SW_TOS_V005, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/06000000
rom info structure: [standard] type (07)
TCL-ID is absent
===>  done
====================
New firmware found (v.3.29, database date: 04.04.2011): 
SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 32Mb
number of areas/bytes to read: 1:02000000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
file saved: C:\InfinityBox\ChineseMiracle\SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005__firmware_20110408-122616.B4M.bin
Disconnect...
done
Finished, time used: 11 min 49 sec
Remove/Install battery now !
In most cases you can read "firmware" instead of "full flash",
it may helps to save a lot of time with the same functionality.
Suggestion: read "firmware" now
Do you want to read "firmware" instead of "full flash" ?

==== [4/8/2011 12:27:14 PM] ====
COM9 [Serial2] selected
module  v3.29
Device: Autodetect 6228-6268 NAND
Checking data, wait...
Action: read flash NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8B00:8A00
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0014]: 0098:00D100900015 [TOSHIBA] TC58NVG0S3AFT
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
interesting cpu type found: 6235:8B00:8A00
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: SH8-CN3_SW_TOS_V005
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: SLD35_09A_BOOTLOADER_V005_MT6235B_SH8-CN3_SW_TOS_V005.bin
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN
project-id: SH8-CN3_SW_TOS_V005, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/06000000
rom info structure: [standard] type (07)
TCL-ID is absent
===>  done
====================
New firmware found (v.3.29, database date: 04.04.2011): 
SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 128Mb
number of areas/bytes to read: 1:08000000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
file saved: C:\InfinityBox\ChineseMiracle\SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005__fullflash_20110408-130749.B4M.bin
Disconnect...
done
Finished, time used: 47 min 15 sec
Remove/Install battery now !
Action: "repair imei"
Model: Autodetect 6228-6268 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
imei-1: 353056755256968
imei write method: mode-1
imei write channel: imei #1 for dual sim/mono CPU
new imei-1: 352009026719356
verification Ok
Finished, time used: 17 sec
Remove/Install battery now !
Action: "repair imei"
Model: Autodetect 6228-6268 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
imei-2: 353056416046568
imei write method: mode-1
imei write channel: imei #2 for dual sim/mono CPU
new imei-2: 353812001707299
verification Ok
Finished, time used: 2 sec
Remove/Install battery now !
  Reply With Quote
Old 04-08-2011, 11:27   #7 (permalink)
No Life Poster
 
PASSIONATE_BOYS's Avatar
 
Join Date: Jul 2007
Location: Infinity-Box Support-
Posts: 9,321
Member: 541591
Status: Offline
Sonork: 100.1611509
Thanks Meter: 7,361
Donate money to this user
If phone is working fine send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage

Wr.
  Reply With Quote
Old 06-20-2011, 10:14   #8 (permalink)
No Life Poster
 
Edocomsel's Avatar
 
Join Date: Aug 2004
Location: E.A.P & E.A.S
Posts: 679
Member: 76239
Status: Offline
Sonork: 100.1584414
Thanks Meter: 210
Donate money to this user
Quote:
Originally Posted by gsmsikar View Post
done the set only with the latest module v3.29 chinese miracle version ..
now i am checking the set if it is working ok for some time ..

thanks infinity team ..


Code:
==== [4/8/2011 12:12:58 PM] ====
COM9 [Serial2] selected
module  v3.29
Device: Autodetect 6228-6268 NAND
Checking data, wait...
Action: read/check information
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8B00:8A00
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0014]: 0098:00D100900015 [TOSHIBA] TC58NVG0S3AFT
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (115200)...
done
interesting cpu type found: 6235:8B00:8A00
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: SH8-CN3_SW_TOS_V005
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
error: can not read memory: 0FAA:S_FT_READBACK_FAIL
can not read memory, errorcode: 0FAA
it may be problem with current operation
error: last error: 0FAA:S_FT_READBACK_FAIL
Disconnect...
done
Finished, time used: 24 sec
Remove/Install battery now !

==== [4/8/2011 12:13:29 PM] ====
COM9 [Serial2] selected
module  v3.29
Device: Autodetect 6228-6268 NAND
Checking data, wait...
Action: read/check information
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8B00:8A00
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0014]: 0098:00D100900015 [TOSHIBA] TC58NVG0S3AFT
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
interesting cpu type found: 6235:8B00:8A00
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: SH8-CN3_SW_TOS_V005
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: SLD35_09A_BOOTLOADER_V005_MT6235B_SH8-CN3_SW_TOS_V005.bin
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN
project-id: SH8-CN3_SW_TOS_V005, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/06000000
rom info structure: [standard] type (07)
TCL-ID is absent
===>  done
====================
New firmware found (v.3.29, database date: 04.04.2011): 
SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
Disconnect...
done
Finished, time used: 1 min 4 sec
Remove/Install battery now !
In most cases you can read "firmware" instead of "full flash",
it may helps to save a lot of time with the same functionality.
Suggestion: read "firmware" now
Do you want to read "firmware" instead of "full flash" ?

==== [4/8/2011 12:15:16 PM] ====
COM9 [Serial2] selected
module  v3.29
Device: Autodetect 6228-6268 NAND
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8B00:8A00
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0014]: 0098:00D100900015 [TOSHIBA] TC58NVG0S3AFT
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
interesting cpu type found: 6235:8B00:8A00
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: SH8-CN3_SW_TOS_V005
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: SLD35_09A_BOOTLOADER_V005_MT6235B_SH8-CN3_SW_TOS_V005.bin
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN
project-id: SH8-CN3_SW_TOS_V005, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/06000000
rom info structure: [standard] type (07)
TCL-ID is absent
===>  done
====================
New firmware found (v.3.29, database date: 04.04.2011): 
SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 32Mb
number of areas/bytes to read: 1:02000000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
file saved: C:\InfinityBox\ChineseMiracle\SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005__firmware_20110408-122616.B4M.bin
Disconnect...
done
Finished, time used: 11 min 49 sec
Remove/Install battery now !
In most cases you can read "firmware" instead of "full flash",
it may helps to save a lot of time with the same functionality.
Suggestion: read "firmware" now
Do you want to read "firmware" instead of "full flash" ?

==== [4/8/2011 12:27:14 PM] ====
COM9 [Serial2] selected
module  v3.29
Device: Autodetect 6228-6268 NAND
Checking data, wait...
Action: read flash NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8B00:8A00
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0014]: 0098:00D100900015 [TOSHIBA] TC58NVG0S3AFT
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
interesting cpu type found: 6235:8B00:8A00
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: SH8-CN3_SW_TOS_V005
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: SLD35_09A_BOOTLOADER_V005_MT6235B_SH8-CN3_SW_TOS_V005.bin
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN
project-id: SH8-CN3_SW_TOS_V005, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/06000000
rom info structure: [standard] type (07)
TCL-ID is absent
===>  done
====================
New firmware found (v.3.29, database date: 04.04.2011): 
SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 128Mb
number of areas/bytes to read: 1:08000000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
file saved: C:\InfinityBox\ChineseMiracle\SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005__fullflash_20110408-130749.B4M.bin
Disconnect...
done
Finished, time used: 47 min 15 sec
Remove/Install battery now !
Action: "repair imei"
Model: Autodetect 6228-6268 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
imei-1: 353056755256968
imei write method: mode-1
imei write channel: imei #1 for dual sim/mono CPU
new imei-1: 352009026719356
verification Ok
Finished, time used: 17 sec
Remove/Install battery now !
Action: "repair imei"
Model: Autodetect 6228-6268 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
imei-2: 353056416046568
imei write method: mode-1
imei write channel: imei #2 for dual sim/mono CPU
new imei-2: 353812001707299
verification Ok
Finished, time used: 2 sec
Remove/Install battery now !

Would you upload somewhere your backup ? I want that firmware ...

Thanks in advance
  Reply With Quote
Old 06-25-2011, 10:25   #9 (permalink)
Junior Member
 
Join Date: Jun 2011
Posts: 8
Member: 1596392
Status: Offline
Sonork: 0909631699
Thanks Meter: 0
Help me flie N8 mtk 6235 .....

Help me file :
SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN
Thanks so much
  Reply With Quote
Old 06-25-2011, 12:35   #10 (permalink)
Product Supporter
 
Join Date: May 2005
Location: uae
Posts: 29,245
Member: 148515
Status: Offline
Thanks Meter: 19,531
Quote:
Originally Posted by nhuttien@ View Post
Help me file :
SLD35_09A_PCB01_GPRS_MT6235B_S01.SH8-CN3_SW_TOS_V005.BIN
Thanks so much
hello!

must be very rare or new firmware.
unfortunately we dont have it in our collection.
you can try to search for same working phone on local market.
read out full backup and use it for flashing your faulty phone.
also i can convert to infinity format BIN file, if you find it.

by the way, did you try to solve your problem without flashing, just by format FFS/IMEI restoring?
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Siemens 1118 fw 50 from China usmanov x1x to x45/x50 0 04-20-2002 20:16
China Emmi clip with "reset button" , help ! kazak Motorola Old Legacy (EMMI) 0 03-25-2002 14:46
Is RHY in China a reliable manufacturer to get cables? Chaku Main Sales Section 8 12-27-2001 15:13
Dejan's 1.05 Flasher for Sell and Demonstration in Hong Kong and China.. Mike Ho Main Sales Section 2 12-23-2001 16:03
which manufacturer in China produce good quality with good price? Chaku Main Sales Section 4 11-28-2001 11:32

 



All times are GMT +1. The time now is 15:57.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.24940 seconds with 9 queries

SEO by vBSEO