chinese iphone network unlock .>! - GSM-Forum

tozbeka · 02-25-2012, 16:26

salaam bro i hav ploblem with chinese iphone model is 4g+++ tryn to unlock it bt its fail here is my log plz help
COM6 [Serial2] selected
module v4.19
Action: read unlock codes
unlock method: read codes
Model: _Autodetect MT6205-6239 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6235:8A04:8A01]...
CPU: MT6235
high speed boot On
chip: 0000:0000:0003
status: FF
rom: 4D573031
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6235,E04
Date: 2000.00.00
Version: 1.0
Version: MAUI.08B.W09.12.MP.V13
Version: KINGSTAR35_08B_HW
detecting structure #2...
1 2 4 5 8 9warning: wrong packet cs
11 12 done
88 byte(s) read
imei: 3536672xxxxx
connection Ok
detecting structure #1...
0 1 2 5 7 8 12 18 20 21 25 27 28 32 38error: detection failed (14 tries), read flash and send to support
error: can't read required data
error: operation failed !
Finished, time used: 19 sec
Remove/Install battery now !

YellowBoss · 02-25-2012, 23:13

Hello,

1. I think you have to select "...NAND..." model
2. Are you sure that this phone is locked to network (but it's not a user code) ?

tozbeka · 02-27-2012, 07:55

I try to select nand bt still doing samething and not userlock its showing Invalid sim....

.::RanjitSinh::. · 02-27-2012, 08:04

it should be IMEI problem, First rebuilt IMEI and check phone status...

tozbeka · 02-27-2012, 08:26

yah i also try that coz the tym phone came imei was starting with 36 so i change it and make it to start with 35...@ rnkher

.::RanjitSinh::. · 02-27-2012, 12:07

not just start with 35, you should write a valid imei otherwise it will cant register on network and will displays INVALID SIM

InfinityHelp · 02-27-2012, 13:13

hello!

you can not change in IMEI just some digits.
write there new, complete, working IMEI value.
Only after that you will get registered to network

02-25-2012, 16:26	#1 (permalink)
tozbeka No Life Poster Join Date: Sep 2011 Location: Dubz Posts: 515 Member: 1651733 Status: Offline Thanks Meter: 21	chinese iphone network unlock .>! salaam bro i hav ploblem with chinese iphone model is 4g+++ tryn to unlock it bt its fail here is my log plz help COM6 [Serial2] selected module v4.19 Action: read unlock codes unlock method: read codes Model: _Autodetect MT6205-6239 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6235:8A04:8A01]... CPU: MT6235 high speed boot On chip: 0000:0000:0003 status: FF rom: 4D573031 Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6235,E04 Date: 2000.00.00 Version: 1.0 Version: MAUI.08B.W09.12.MP.V13 Version: KINGSTAR35_08B_HW detecting structure #2... 1 2 4 5 8 9warning: wrong packet cs 11 12 done 88 byte(s) read imei: 3536672xxxxx connection Ok detecting structure #1... 0 1 2 5 7 8 12 18 20 21 25 27 28 32 38error: detection failed (14 tries), read flash and send to support error: can't read required data error: operation failed ! Finished, time used: 19 sec Remove/Install battery now !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
$50 Reward for unlocking my 6150!!!	TheDon	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	03-23-2015 14:21
FAQ about unlock n0kia	man0n	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:06

02-25-2012, 23:13	#2 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,476 Member: 1043909 Status: Offline Thanks Meter: 60,926	Hello, 1. I think you have to select "...NAND..." model 2. Are you sure that this phone is locked to network (but it's not a user code) ?

02-27-2012, 07:55	#3 (permalink)
tozbeka No Life Poster Join Date: Sep 2011 Location: Dubz Posts: 515 Member: 1651733 Status: Offline Thanks Meter: 21	I try to select nand bt still doing samething and not userlock its showing Invalid sim....

02-27-2012, 08:04	#4 (permalink)
.::RanjitSinh::. No Life Poster Join Date: May 2007 Location: Gujarat,India Posts: 527 Member: 517102 Status: Offline Sonork: 100.1601229 Thanks Meter: 199	it should be IMEI problem, First rebuilt IMEI and check phone status...

02-27-2012, 08:26	#5 (permalink)
tozbeka No Life Poster Join Date: Sep 2011 Location: Dubz Posts: 515 Member: 1651733 Status: Offline Thanks Meter: 21	yah i also try that coz the tym phone came imei was starting with 36 so i change it and make it to start with 35...@ rnkher

02-27-2012, 12:07	#6 (permalink)
.::RanjitSinh::. No Life Poster Join Date: May 2007 Location: Gujarat,India Posts: 527 Member: 517102 Status: Offline Sonork: 100.1601229 Thanks Meter: 199	not just start with 35, you should write a valid imei otherwise it will cant register on network and will displays INVALID SIM

02-27-2012, 13:13	#7 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! you can not change in IMEI just some digits. write there new, complete, working IMEI value. Only after that you will get registered to network