01-13-2016, 11:30
|
#76 (permalink)
|
Junior Member
Join Date: Mar 2014
Posts: 36
Member: 2151460
Status: Offline
Thanks Meter: 6 | pl,s upload this file Quote:
Originally Posted by PASSIONATE_BOYS China M8 HTC copy read full info, Read firmware in Scat, repair security done-
Read full Info- Code: Chinese Miracle II [MTK module] v 1.10
Operation : Check / Read Info [ v1.10 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 9 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E3958524D42008ACEC466613B
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMRX9
[eMMC] : FLASH_CID : 1501004E3958524D42008ACEC466613B
[eMMC] : FLASH_LEN : 0x0000000070000000
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Initial info read Ok!
Brand : alps
ProdName : mbk72_wet_lca
ProdModel : M8
Device : mbk72_wet_lca
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1
Done!
Elapsed: 00:00:11
Reconnect Power/Cable! Read firmware in Scat- Code: Operation : Read Flash [ v1.10 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 9 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E3958524D42008ACEC466613B
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMRX9
[eMMC] : FLASH_CID : 1501004E3958524D42008ACEC466613B
[eMMC] : FLASH_LEN : 0x0000000070000000
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Conent now ...
Brand : alps
ProdName : mbk72_wet_lca
ProdModel : M8
Device : mbk72_wet_lca
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1
[Read Ok] : preloader_mbk72_wet_lca.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img
[ScatCFG] : MT6572 / V1.1.1 / mbk72_wet_lca / EMMC
FW Size : 425 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6572__alps__M8__mbk72_wet_lca__4.2.2__ALPS.JB3.MP.V1\
All done!
Done!
Elapsed: 00:02:58
Reconnect Power/Cable! Repair Security- Code: Operation : Repair Security [ v1.10 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 9 ]
Sync...
Init Ok, waiting for phone ...
Reading initial info, wait...
Phone Info :
BB : MT6572, E01
HW : MBK72_WET_JB3_HSPA_HW
SW : MOLY.WR8.W1315.MD.WG.MP.V1.P3
MM : 2000.00.00
VR : 1.0
SN : 092001MT012345678901267662_163129 10
Security Info :
IMEI [1] : 355625154364447
IMEI [2] : 355625154364454
Read Ok!
Update IMEI[1] to : 35369500****** done!
Update IMEI[2] to : 35576400****** done!
Done!
Elapsed: 00:01:08
Reconnect Power/Cable! Br. | bro pl,s share this file it is needed |
| |