Chinese Miracle-2 MTK v1.26 - Nokia MT6261, MT6735/MT8735, New Android features etc

[InfinitySupport]

Chinese Miracle-2 MTK/Mediatek v1.26 - Nokia MT6261, MT6735/MT8735, New MTK Android features, more CPUs

MTK SP Platform

- New CPU support
- MT6735/MT8735
Service: Security Repair, Read Info, Read Extended Info, Format FS, Fix DL
UserLock: Read PatternLock, Reset UserLocks (Google, Pin, Password etc.)
Forensic: PhoneBook extraction
Extra: Flash Erase, Repair Unknown BaseBand, Init Preloader
Privacy Lock reset: Normal, Safe mode
Read Factory Firmware
Read/Write: Flash, NVRAM
Unlock: SP Unlock via "Direct Unlock" and "Read Codes" (Under Test)

- USB Flashing improved
Flash Engine revised
MT6735/MT8735 Flashing support activated
Supported Platforms for Factory FW Flashing:
MT6571/MT6572/MT6575/MT6577/MT6582/MT6589/MT6592/MT6732/MT6735/MT6752/MT6795/MT87xx/MT83xx with eMMC

- Firmware reading improved
Brand-specific improvements (Meizu, Xiamoi, Qmobile, Lenovo, Alcatel)
MT67xx New "type" structure supported
Autodetection improved
MT6735 eMMC supported
MT8735 eMMC supported
Supported Platforms for Factory FW Reading:
MT6571/MT6572/MT6575/MT6577/MT6582/MT6589/MT6592/MT6732/MT6735/MT6752/MT6795/MT87xx/MT83xx with eMMC

- Service operations improved
- New Feature - Read Extended info
Allow read: All hardware info (LCD/Touch/Camera/rest info) and software info (Including languages)
Support most "unknown" brands/models and 3rd party models (some original brands supported as well)
Useful for seeking spareparts, identify HW, compare firmwares, cross-flashing "noname" phones
Supported Platforms: MT6571/MT6572/MT6575/MT6577/MT6582/MT6589/MT6592/MT6732/MT6735/MT6752/MT6795/MT87xx/MT83xx with eMMC

- NVRAM operations revised
MT6735/MT8735 supported
Now default name is "BaseBand Version" (if possible to identify it)
Allow identify NV files for "unknown" brands
Allow use same BB version NVRAM for different phones

- SP Unlock improved
- MT6735/MT8735 SP Unlock support activated (Under Test)
- New models included:
MTS Smart Run 4G
- Direct Unlock revised

- Security Repair improved
- Support MT67xx models with "new type" structure for "CM2: Permanent mode"
- Fix Unknown BaseBand revised for latest platforms
- Some bugfixes

- UserData operations improved
- Forensic Engine revised
Improved PhoneBook extraction for old Android versions (4.0.x - 4.x.x)
Improved PhoneBook extraction for Android 5.x versions
Revised output formats - VCFv2 supported (combined), VCFv3 supported (combined)
Total supported formats: CSV (Google), VCFv2 and VCFv3 (combined single), TXT (readable/printing)
- Privacy Protection password (UserData Safe mode) improved for some Android versions
- NAND PatternLock reading revised

- Other
MT6580 eMMC support under test (Service/Unlock/UserLocks/Forensic/FWReading/Info)
MT6753 eMMC support under test (Service/Unlock/UserLocks/Forensic/FWReading/Info)
Generic NAND support revised

MTK FP Platform

- FlashLoaders updated
- Nokia 105 series phones support activated!
Supported operations:
*Read Info / Check
*Format FS
Supported models: RM-1134, RM-1135, RM-1136
Now CM2MTK module support ALL exisitng Nokia MTK phone for basic operations!

- UserCode reset revised for some models
- Some improvements in Forensic Engine for MT6260/MT6261 phones

Other (Main)

- Connection revised for FP/SP
- Some bugfixes and improvements



Official download link



Infinity-Box 10 (ten) years (2005 - 2015) non-stop regular updates and support as nobody else: Infinity-Box - News

New features, Unlock Codes (Huawei, Motorola, Samsung etc.), iPhone Unlock, Software Activations released for Infinity-Box Online Service

- World biggest flash files database for several thousands brands/models
- BB5 Easy Service Tool [BEST] Dongle
- CDMA-Tool Dongle (fast and easy unlock)
- Infinity-Box Dongle ready for delivery

- Follow us on Twitter
- Facebook

[JayDi]

Original Nokia 105 on MediaTek MT6261

Operation : Check / Read Info [ v1.26 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 18 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : EABB74F587812ED2027FE99F2FE9F3FD
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_NkL.fg
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32
[0] : FLASH_DIE : 00C8 0060 0016 0000 
[0] : FLASH_LEN : 0x00400000

Done!
Elapsed: 00:00:09
Reconnect Power/Cable!

Safe Format :

Operation : Format FileSystem [ v1.26 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 18 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : EABB74F587812ED2027FE99F2FE9F3FD
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_NkL.fg
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32
[0] : FLASH_DIE : 00C8 0060 0016 0000 
[0] : FLASH_LEN : 0x00400000

Executing FFS FORMAT now...
FAT_RANGE : 0x00368000-0x003F7FFF , LEN : 0x00090000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE

Done!
Elapsed: 00:00:11
Reconnect Power/Cable!

[JayDi]

http://forum.gsmhosting.com/vbb/f296...stuff-1983508/

Full report about MT6735/8735 support. Not just noise
Also explained new features.

[Momin_Telecom]

after install 1.26 you need upgrade your card firmware
with Dongle manager download from here http://server2.infinity-box.com/down...gleManager.rar

Disable antivirus Need internet connection during upgrade card


thanks
Infinity team

[kabul]

upgrade card firmware success thanks Infinity team

[kariakala]

I can not update

DongleManager version: 1.53
PC HWID: 1D8CBFDE620904E4DB8A595329B51B4E
Card-Reader: Gemalto e-gate Smart Card 0
Card type: inf
Locating server...
Server address found
Connecting to server
Server connection successfully established
S/N: 9Axxx, Firmware: 0128.02
Authenticating on server...
Authentication stage error:
Server reported error:[0051] Not translated!

kindly guide after setup 1.26 its still shows me 1.25 version

after use latest dongle manager
its done

[asadnow2k]

----------Process started: 8/26/2015 11:51:50 AM----------
8/26/2015 11:51:50 AM DongleManager version: 1.56
PC HWID: 2EFFECCB8A2EAF2AB28942047C8CB32A
Card-Reader: FT SCR2000 0
Box/Dongle type: [BEST]
Locating server...
Server address found
Connecting to server
Connection to server failedSocket Error # 11001
Host not found.

what type of error this is?

[Nasir Mobiles]

Originally Posted by kariakala

DongleManager version: 1.53

I can not update

kindly guide after setup 1.26 its still shows me 1.25 version

this is because you are using old dongle manager.
download latest one and try again.

http://server2.infinity-box.com/down...gleManager.rar

after use latest dongle manager
its done

if so delete old version folder and then install 1.26. (C:\InfinityBox\CM2MTK)

[saeedullah_khan]

Originally Posted by kabul

upgrade card firmware success thanks Infinity team

please keep in mind don't show your dongle/Box S.No in forum.

[GSMrantu]

Hi-Tech Pride Read & Format Done

Format Done

Operation : Format FileSystem [ v1.26 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 162 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 2D9C540B9F01D73AC1E0C6D58F6F9E30
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , 
[0] : FLASH_DIE : 00C2 0020 0016 0000 
[0] : FLASH_LEN : 0x00400000
SDS : 0x003FE000 , 0x00002000

Backup done
Executing FFS FORMAT now...
FAT_RANGE : 0x003BA000-0x003FDFFF , LEN : 0x00044000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE

Done!
Elapsed: 00:00:11
Reconnect Power/Cable!

[YellowBoss]

Originally Posted by kariakala

I can not update



kindly guide after setup 1.26 its still shows me 1.25 version

after use latest dongle manager
its done

Latest DongleManager for today is v1.56 but you have used v1.53 !

Download new DongleManager now - http://server1.infinity-box.com/down...gleManager.rar

[YellowBoss]

Originally Posted by asadnow2k

what type of error this is?

Its a problem with connection to server.
Disable your PC Firewall and/or Antivirus and try again.

[waseem pirmahal]

plz add flash files MT6571/MT6572/MT6575/MT6577/MT6582/MT6589/MT6592/MT6732/MT6735/MT6752/MT6795/MT87xx/MT83xx in Support area all modles

[kamraankisskiss]

Originally Posted by waseem pirmahal

plz add flash files MT6571/MT6572/MT6575/MT6577/MT6582/MT6589/MT6592/MT6732/MT6735/MT6752/MT6795/MT87xx/MT83xx in Support area all modles

yes i agree with u.add file on support area.

[arsolangi]

ait for phone...
Phone found! [ 100 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0076 , [HYNIX] H8BCS0UN0MCR
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0056 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...
Not supported FlashType for this operation yet