GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 10-05-2015, 04:52   #26206 (permalink)
Freak Poster
 
Join Date: Nov 2013
Location: Infinity Team
Posts: 407
Member: 2072265
Status: Offline
Thanks Meter: 46
Qmobile A290 format & read FFW Done With CM2


Card found : S/N : 7BD0661F , v0129
Chinese Miracle II [MTK module] v 1.32

Operation : Format FileSystem [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 29 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164040506A27A9432AD
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164040506A27A9432AD
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:20
Reconnect Power/Cable!


Operation : Read Flash [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 29 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164040506A27A9432AD
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164040506A27A9432AD
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : QMobile
ProdName : QMobile A290
ProdModel : QMobile A290
Device : QMobile A290
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.KK1.MP7.V1

[Read Ok] : preloader_s5201ap.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / s5201ap / EMMC
FW Size : 929 MiB
Scatter saved to : C:\Documents and Settings\SAGAR NADEEM\Desktop\MT6572__QMobile__QMobile A290__QMobile A290__4.4.2__ALPS.KK1.MP7.V1\

All done!

Done!
Elapsed: 00:06:35
Reconnect Power/Cable!
  Reply With Quote
Old 10-05-2015, 06:19   #26207 (permalink)
No Life Poster
 
rehmani's Avatar
 
Join Date: Aug 2006
Location: proud to be an INDIAN Muslim
Age: 39
Posts: 5,175
Member: 333199
Status: Offline
Sonork: may i help u just pm me
Thanks Meter: 2,405
Donate money to this user
xiaomi 4g format,read ff and upgrade done

format
Code:
Operation : Format FileSystem [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 57 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6592
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6592_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4838473264040501898B5961DF
DA Stat : v4.2 on BBID : 0x8A
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d2G8
[eMMC] : FLASH_CID : 90014A4838473264040501898B5961DF
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM    : 0x00020000
EXT RAM    : 0x80000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:38
Reconnect Power/Cable!
read ff 4.2.2
Code:
Operation : Read Flash [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 57 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6592
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6592_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4838473264040501898B5961DF
DA Stat : v4.2 on BBID : 0x8A
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d2G8
[eMMC] : FLASH_CID : 90014A4838473264040501898B5961DF
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM    : 0x00020000
EXT RAM    : 0x80000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 

Brand     : Xiaomi
ProdName  : lcsh92_wet_jb9
ProdModel : HM NOTE 1W
Device    : lcsh92_wet_jb9
AndroidVer: 4.2.2
MTKxCPU   : MT6592
MTKxPRJ   : ALPS.JB9.MP.V1.4

[Read Ok] : preloader_lcsh92_wet_jb9.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6592 / V1.1.2 / lcsh92_wet_jb9 / EMMC
FW Size : 834 MiB
Scatter saved to : D:\MT6592__Xiaomi__HM NOTE 1W__lcsh92_wet_jb9__4.2.2__ALPS.JB9.MP.V1.4\

All done!

Done!
Elapsed: 00:03:43
Reconnect Power/Cable!
upgrade 4.4.2 done
Code:
Scatter Load Ok , BaseBand : MT6592 , Project : lcsh92_wet_jb9 , Storage : EMMC
Files found : 11 , Set to Flash : 10
Ready to Flash!

Operation : Flash [ v1.32 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 57 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6592
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6592_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4838473264040501898B5961DF
DA Stat : v4.2 on BBID : 0x8A
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d2G8
[eMMC] : FLASH_CID : 90014A4838473264040501898B5961DF
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM    : 0x00020000
EXT RAM    : 0x80000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6592 , Project : lcsh92_wet_jb9 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : Undefined structure, determined as forced
BL : eMMC supported by BootLoader!

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000000000-0x0000000000100000
Erase : 0x0000000001D00000-0x00000001CEE00000
Flash Pre-Erase Done, time used : 00:00:11

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ... 
Use : preloader_lcsh92_wet_jb9.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0012
Update PMT by user request
Repartition Done!

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:01:27

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Data Verify Done, time used : 00:00:26

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:02:21
Reconnect Power/Cable!
read info after update
Code:
Operation : Check / Read Info [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 57 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6592
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6592_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4838473264040501898B5961DF
DA Stat : v4.2 on BBID : 0x8A
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d2G8
[eMMC] : FLASH_CID : 90014A4838473264040501898B5961DF
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM    : 0x00020000
EXT RAM    : 0x80000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : alps
ProdName  : lcsh92_wet_jb9
ProdModel : HM NOTE 1W
Device    : lcsh92_wet_jb9
AndroidVer: 4.4.2
MTKxCPU   : MT6592
MTKxPRJ   : ALPS.KK1.MP1.V2.46

Done!
Elapsed: 00:00:22
Reconnect Power/Cable!
  Reply With Quote
Old 10-05-2015, 06:23   #26208 (permalink)
No Life Poster
 
syed tuqeer's Avatar
 
Join Date: Dec 2007
Location: PAKISTAN
Posts: 8,860
Member: 654997
Status: Offline
Sonork: 1613804(Don't Spam Plz)
Thanks Meter: 4,073
QMobile A55 Read Factory FIrmware Done :)

Code:
Operation : Read Flash [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8C00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E35575A4D4201DAE04035B063
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMZW5
[eMMC] : FLASH_CID : 1501004E35575A4D4201DAE04035B063
[eMMC] : FLASH_EXT : 00200000/00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 

Brand     : QMobile
ProdName  : QMobile
ProdModel : A55
Device    : QMobile
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_gionee72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : spdata.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / gionee72_wet_jb3 / EMMC
FW Size : 938 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6572__QMobile__A55__QMobile__4.2.2__ALPS.JB3.MP.V1\

All done!

Done!
Elapsed: 00:04:41
Reconnect Power/Cable!
  Reply With Quote
Old 10-05-2015, 06:59   #26209 (permalink)
No Life Poster
 
Luckey1's Avatar
 
Join Date: Jun 2014
Location: Infinity Box Team
Posts: 2,157
Member: 2197212
Status: Offline
Sonork: N/A
Thanks Meter: 680
DISKO-K6 READ FLASH FiLE DONE

Code:
Phone found! [ 105 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ... 
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2     Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00EF 0060 0018 0000
[0] Flash VEN : Winbond , W25Q128
[0] Flash CAP : 01000000
Read Flash Content
Read Ok , collect info
Platform : MOCOR_12B_6531.W13.07_Release
Project  : SC6716_PDA
HWInfo   : SC6716_PDA
Compile  : 12-15-2014 14:23:33
Set FileInfo : 
Model Vendor : DISKO
Model Name   : K6
ExtInfo Data : English
Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_01000000_MOCOR_12B_6531.W13.07_Release_12152014142333_English__DISKO-K6.bin
Done!
  Reply With Quote
The Following User Says Thank You to Luckey1 For This Useful Post:
Old 10-05-2015, 07:16   #26210 (permalink)
No Life Poster
 
Momin_Telecom's Avatar
 
Join Date: Dec 2010
Location: Gsm Hosting (INDIA)
Posts: 2,945
Member: 1478271
Status: Offline
Sonork: 100.1608386
Thanks Meter: 1,806
Donate money to this user
Huawei Y511 U30 Read ff Done with Cm2

Huawei Y511 U30 Read ff Done with Cm2



Code:
Reading Flash Conent now ... 
USBDL : Init HSUSB Ok!

Brand     : HUAWEI
ProdName  : Y511-U30
ProdModel : HUAWEI Y511-U30
Device    : HWY511-U
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_wt98511.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / wt98511 / EMMC
FW Size : 688 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6572__HUAWEI__HUAWEI Y511-U30__HWY511-U__4.2.2__ALPS.JB3.MP.V1\

All done!

Done!
Elapsed: 00:03:31
Reconnect Power/Cable!
Br
Momin_Telecom
  Reply With Quote
The Following User Says Thank You to Momin_Telecom For This Useful Post:
Old 10-05-2015, 07:31   #26211 (permalink)
No Life Poster
 
diesel6's Avatar
 
Join Date: Jul 2006
Location: punjab
Age: 43
Posts: 1,445
Member: 315867
Status: Offline
Sonork: 100.1654770
Thanks Meter: 708
day starts with flash huawei y511-u30


Scatter Load Ok , BaseBand : MT6572 , Project : wt98511 , Storage : EMMC
Files found : 12 , Set to Flash : 11
Ready to Flash!

Operation : Flash [ v1.32 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 13 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164048600A3AE4C31B1
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164048600A3AE4C31B1
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : wt98511 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000600000-0x0000000000100000
Erase : 0x0000000002300000-0x00000000E3E00000
Flash Pre-Erase Done, time used : 00:00:07

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_wt98511.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0013

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash now : FAT
Image Flash Ok
Flash Write Done, time used : 00:01:54

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Verify Passed : FAT
Data Verify Done, time used : 00:00:29

Update RomInfo done

Done!
Elapsed: 00:02:46
Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to diesel6 For This Useful Post:
Old 10-05-2015, 07:46   #26212 (permalink)
No Life Poster
 
diesel6's Avatar
 
Join Date: Jul 2006
Location: punjab
Age: 43
Posts: 1,445
Member: 315867
Status: Offline
Sonork: 100.1654770
Thanks Meter: 708
lava 454 reset too many pettren done


Chinese Miracle II [MTK module] v 1.32

Operation : Check / Read Info [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 13 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8B00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1BF629C40A9
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : LAVA
ProdName : LAVA IRIS454
ProdModel : iris454
Device : mobitek77_m01_ics2
AndroidVer: 4.0.4
MTKxCPU : MT6577
MTKxPRJ : ALPS.ICS2.MP.V1.18

MODEM :
BaseBand : MT6577_S00_MAUI_11AMD_W12_22_SP_V14_P1

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!


Operation : Clear UserLocks [Pin/Pwd/Pattern/FVLock/GoogleAcc] [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 13 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8B00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1BF629C40A9
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

LSSK Ok!
LSSG Ok!
Security Settings : Clear Ok!

[Info] : Android 5.x / MT67xx : If phone stuck on "Logo"
1. Wait 2-3 minutes. Power Off phone by long press "Power" button
2. Power On phone again
3. Or wait up to 3-7 minutes, until phone start by itself
4. Also recommended reboot phone twice before start use it

Done!
Elapsed: 00:00:19
Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to diesel6 For This Useful Post:
Old 10-05-2015, 07:58   #26213 (permalink)
No Life Poster
 
DUNIYA JAMAL's Avatar
 
Join Date: Oct 2005
Location: Pakistan
Posts: 1,922
Member: 192810
Status: Offline
Sonork: Some people NEED change
Thanks Meter: 860
Huawei Y511-U30 hang on Logo Done by Flashing

Code:
Operation : Check / Read Info [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 101 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164048602A411348159
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164048602A411348159
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : HUAWEI
ProdName  : Y511-U30
ProdModel : HUAWEI Y511-U30
Device    : HWY511-U
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

EXTRA : 
LCD [0] : otm8018b_fwvga_dsi_vdo
LCD [1] : hx8379a_fwvga_dsi_vdo
LCD [2] : nt35512_dsi_vdo
LCD Res : 854x480
TOUCH [0] : GT9XX
TOUCH [1] : ft5206
CAM [0] : hi351_yuv
CAM [1] : mt9t113_mipi_yuv
CAM [2] : gc0329_yuv
CAM [3] : siv121d_yuv
MODEM : wingtech72_wet_jb3_hspa_wtdef_sky_98511u30_d5
LOCALE : en_US ar_EG fa_IR tr_TR ru_RU zh_CN hdpi

Done!
Elapsed: 00:00:33
Reconnect Power/Cable!


Scatter Load Ok , BaseBand : MT6572 , Project : wt98511 , Storage : EMMC
Files found : 12 , Set to Flash : 11
Ready to Flash!

Operation : Flash [ v1.32 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 101 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164048602A411348159
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164048602A411348159
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : wt98511 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000600000-0x0000000000100000
Erase : 0x0000000002300000-0x00000000E3E00000
Flash Pre-Erase Done, time used : 00:00:10

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ... 
Use : preloader_wt98511.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0013

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash now : FAT
Image Flash Ok
Flash Write Done, time used : 00:01:54

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Verify Passed : FAT
Data Verify Done, time used : 00:00:28

Update RomInfo done

Done!
Elapsed: 00:02:53
Reconnect Power/Cable!
  Reply With Quote
Old 10-05-2015, 08:01   #26214 (permalink)
No Life Poster
 
DUNIYA JAMAL's Avatar
 
Join Date: Oct 2005
Location: Pakistan
Posts: 1,922
Member: 192810
Status: Offline
Sonork: Some people NEED change
Thanks Meter: 860
Samsung J1 high copy Read full Info,NVRM & Read Factory File Done

Code:
Operation : Check / Read Info [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 101 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 7001004D4D4330344702064C01A81045
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : G40CM
[eMMC] : FLASH_CID : 7001004D4D4330344702064C01A81045
[eMMC] : FLASH_EXT : 00200000/00020000
[eMMC] : FLASH_LEN : 0x00000000E2C00000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : samsung
ProdName  : SM-G530F
ProdModel : SM-G530F
Device    : SM-G530F
AndroidVer: 4.4.4
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

EXTRA : 
LCD [0] : s6d77a1a01_dsi_vdo
LCD Res : 800x480
TOUCH [0] : ft5206
TOUCH [1] : bd6862a1
CAM [0] : s5k4ecgx_mipi_yuv
CAM [1] : gc2145mipi_yuv
CAM [2] : bf3905_mipi_yuv
MODEM : mbk72_wet_jb3_hspa_839
LOCALE : en_US es_ES ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG fa_IR th_TH zh_CN zh_TW pt_PT nl_NL el_GR hu_HU tl_PH ur_PK ro_RO cs_CZ iw_IL pl_PL my_MM km_KH hdpi -sw600dp -sw720dp

Done!
Elapsed: 00:00:30
Reconnect Power/Cable!


Operation : Read Flash [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 101 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 7001004D4D4330344702064C01A81045
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : G40CM
[eMMC] : FLASH_CID : 7001004D4D4330344702064C01A81045
[eMMC] : FLASH_EXT : 00200000/00020000
[eMMC] : FLASH_LEN : 0x00000000E2C00000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 

Brand     : samsung
ProdName  : SM-G530F
ProdModel : SM-G530F
Device    : SM-G530F
AndroidVer: 4.4.4
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_mbk72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / mbk72_wet_jb3 / EMMC
FW Size : 678 MiB
Scatter saved to : C:\Users\Fahad Irfan\Desktop\Samsung J100H(G530F)\MT6572__samsung__SM-G530F__SM-G530F__4.4.4__ALPS.JB3.MP.V1\

All done!

Done!
Elapsed: 00:04:14
Reconnect Power/Cable!


Operation : Read NVRAM [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 101 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 7001004D4D4330344702064C01A81045
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : G40CM
[eMMC] : FLASH_CID : 7001004D4D4330344702064C01A81045
[eMMC] : FLASH_EXT : 00200000/00020000
[eMMC] : FLASH_LEN : 0x00000000E2C00000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : Can't identify BB version!
Read Ok, MT6572_eMMC.spnv saved

Done!
Elapsed: 00:00:29
Reconnect Power/Cable!
  Reply With Quote
Old 10-05-2015, 08:05   #26215 (permalink)
No Life Poster
 
DUNIYA JAMAL's Avatar
 
Join Date: Oct 2005
Location: Pakistan
Posts: 1,922
Member: 192810
Status: Offline
Sonork: Some people NEED change
Thanks Meter: 860
Samsung G530H(GALAXY Grand Prime) Read full Info,NVRM & Read Factory File Done

Code:
Operation : Check / Read Info [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 101 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A2058494E594816A1D0C04E2007
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1D0C04E2007
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Samsung
ProdName  : SM-G530H
ProdModel : SM-G530H
Device    : Samsung G530H(GALAXY Grand Prime)
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

MODEM : 
BaseBand  : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V43_P3_1_wg_n

EXTRA : 
LCD [0] : s6d78a0_qhd_dsi_vdo
LCD [1] : rm68191_qhd_dsi_vdo
LCD [2] : nt35517_qhd_dsi_vdo
LCD [3] : hx8389c_qhd_dsi_vdo
LCD Res : 960x540
TOUCH [0] : ICN83XX
TOUCH [1] : ft5206
TOUCH [2] :    
TOUCH [3] : ft5206
CAM [0] : ov5640_mipi_yuv
CAM [1] : s5k4ecgx_mipi_yuv
CAM [2] : gc0329_yuv
CAM [3] : gc2145mipi_yuv
CAM [4] : gc0308_yuv
CAM [5] : gc0328_yuv
CAM [6] :  gc0309_yuv gc0307_yuv s5k5eayx_mipi_yuv  s5k6aafx_yuv
MODEM : keytak72_cwet_kk_hspa
LOCALE : en_US es_ES zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG  fa_IR th_TH hdpi -sw600dp -sw720dp

Done!
Elapsed: 00:00:20
Reconnect Power/Cable!


Operation : Read Flash [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 101 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A2058494E594816A1D0C04E2007
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1D0C04E2007
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 

Brand     : Samsung
ProdName  : SM-G530H
ProdModel : SM-G530H
Device    : Samsung G530H(GALAXY Grand Prime)
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

[Read Ok] : preloader_keytak72_cwet_lca.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / keytak72_cwet_lca / EMMC
FW Size : 933 MiB
Scatter saved to : C:\Users\Fahad Irfan\Desktop\Samsung G530(Grand Prime)\MT6572__Samsung__SM-G530H__Samsung G530H(GALAXY Grand Prime)__4.4.2__ALPS.KK1.MP7.V1\

All done!

Done!
Elapsed: 00:05:07
Reconnect Power/Cable!


Operation : Read NVRAM [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 101 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A2058494E594816A1D0C04E2007
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1D0C04E2007
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V43_P3_1_wg_n
Read Ok, MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V43_P3_1_wg_n_eMMC.spnv saved

Done!
Elapsed: 00:00:23
Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to DUNIYA JAMAL For This Useful Post:
Old 10-05-2015, 08:09   #26216 (permalink)
No Life Poster
 
Deepesh Sharma's Avatar
 
Join Date: May 2010
Location: Incredible-India
Posts: 6,016
Member: 1301233
Status: Offline
Sonork: Closed
Thanks Meter: 9,293
Donate money to this user
gionee s96 read user code/ff

read user code
Code:
Operation : Read UserCode [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 166 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 14A7AAB10CD8A80A27289C7CCE615188
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C800 6000 1800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F4 , [GigaDevice] GD25LQ128
[0] : FLASH_DIE : 00C8 0060 0018 0000 
[0] : FLASH_LEN : 0x01000000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000
SDS_INFO : Not exists

Read ExtData
Sorting ExtData
Reading UserCode

Active : Yes , Code : 1920

Privacy Lock :YU

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!
read factory firmware
Code:
Operation : Read Flash [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 166 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 14A7AAB10CD8A80A27289C7CCE615188
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C800 1800 0000 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO   : 0x02 , Ver : 139.0 , BBID : 0x00
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F4 , [GigaDevice] GD25LQ128
[0] : FLASH_DIE : 00C8 0060 0018 0000 
[0] : FLASH_LEN : 0x01000000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000
SDS_INFO : Not exists
Reading Flash Conent now ... 

Read Flash now
Read Ok , 16777216 bytes read
Check and collect compile info
File_Info   : WBG2306GI_0301_PCB01_gprs_MT6260_S00.2306GI_0301_V0766.bin
FileVersion : 2306GI_0301_V0766

[ScatCFG] : MT6260 / 2306GI_0301_V0766 / NOR , SF
Firmware saved to : C:\InfinityBox\CM2MTK\Read_out\WBG2306GI_0301_PCB01_gprs_MT6260_S00\

Done!
Elapsed: 00:01:01
Reconnect Power/Cable!
  Reply With Quote
Old 10-05-2015, 08:23   #26217 (permalink)
Freak Poster
 
Join Date: May 2008
Location: beawar (rajsthan)
Posts: 219
Member: 764695
Status: Offline
Sonork: 100.1627861
Thanks Meter: 45
Donate money to this user
Lenovo S650 Flesh Done


Quote:
======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 34 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004B375530304D086D62D07D614D
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : M00U7
[eMMC] : FLASH_CID : 1501004B375530304D086D62D07D614D
[eMMC] : FLASH_EXT : 00200000/00020000
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6582 , Project : sofina_row , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000000000-0x0000000000100000
Erase : 0x0000000001D00000-0x00000000BD080000
Flash Pre-Erase Done, time used : 00:00:06

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_sofina_row.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0014

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : EBR2
Image Flash Ok
Flash now : PRELOAD
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:04:07

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : EBR2
Verify Passed : PRELOAD
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Data Verify Done, time used : 00:00:04

Update RomInfo done

Done!
Elapsed: 00:04:37
Reconnect Power/Cable!
  Reply With Quote
Old 10-05-2015, 09:01   #26218 (permalink)
No Life Poster
 
Join Date: May 2005
Age: 40
Posts: 9,814
Member: 146708
Status: Offline
Sonork: 100.108221
Thanks Meter: 1,603
Quote:
Originally Posted by maanarman View Post
Code:
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 13 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E35575A4D4201B8545B28B0EB
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMZW5
[eMMC] : FLASH_CID : 1501004E35575A4D4201B8545B28B0EB
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 

Brand     : samsung
ProdName  : SM-G3812
ProdModel : SM-G3812
Device    : SM-G3812
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.10

[Read Ok] : preloader_kingsung72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / kingsung72_wet_jb3 / EMMC
FW Size : 817 MiB
Scatter saved to : C:\Documents and Settings\maanarman\Desktop\SM-G3812 SAMSUNG\MT6572__samsung__SM-G3812__SM-G3812__4.2.2__ALPS.JB3.MP.V1.10\

All done!

Done!
Elapsed: 00:11:39
Reconnect Power/Cable!
hi all..

anyone has this flash file..* i need it..poster is not adding to flash file because of busy..
  Reply With Quote
Old 10-05-2015, 09:05   #26219 (permalink)
No Life Poster
 
diesel6's Avatar
 
Join Date: Jul 2006
Location: punjab
Age: 43
Posts: 1,445
Member: 315867
Status: Offline
Sonork: 100.1654770
Thanks Meter: 708
samsung e1200i phone lock done by only hit check info


Chinese Miracle II [SPD module] v 1.05

Operation : Check/Read Info [ v1.05 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 15 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6530 , FDLStat : 00C0
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000

Elapsed: 00:00:18

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to diesel6 For This Useful Post:
Old 10-05-2015, 09:09   #26220 (permalink)
No Life Poster
 
kabul's Avatar
 
Join Date: Jan 2007
Posts: 4,626
Member: 433097
Status: Offline
Sonork: 100.1661890
Thanks Meter: 8,073
Q Mobile A63__4.2.2 Dead Recovery Time 03:10" Successful, Done
.:: BY ::.
..::: Chinese Miracle-2 MTK :::..
Code:
 
Scatter Load Ok , BaseBand : MT6572 , Project : x3365 , Storage : EMMC Files found : 14 , Set to Flash : 13 Ready to Flash!
Operation : Flash [ v1.32 ]
======= Flash 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey
Wait for phone... Phone found! [ 8 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6572 BB_CPU_HW : CA01 BB_CPU_SW : 8C00 BB_CPU_SB : 0000 BB_CPU_NM : [MediaTek] MT6572_S00 Processing BROM stage BLVersion : 0x01 SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Ver : MTK_AllInOne_DA_v7.1533.03 NAND_ID : 00000000000000000000000000000000 eMMC_ID : 110100303034473930101605C649A0A3 DA Stat : v4.2 on BBID : 0x88 DA Sent. Configure setting now ... DA started successuflly eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0011 , OEM : 0100 [eMMC] : FLASH_INF : 09G40 [eMMC] : FLASH_CID : 110100303034473930101605C649A0A3 [eMMC] : FLASH_EXT : 00200000/00080000 [eMMC] : FLASH_LEN : 0x00000000EC000000 INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok!
ScatCFG : BaseBand : MT6572 , Project : x3365 , Storage : EMMC Setting : Flash Pre-Erase (Safe) : Enabled Setting : AFF verify : Enabled
BL : Check HW compatibility BL : BBID supported by BootLoader! BL : Check eMMC compatibility BL : eMMC supported by BootLoader!
BL : Flash Pre-Erase Total blocks to Erase : 2 Erase : 0x0000000000C00000-0x0000000000100000 Erase : 0x0000000002900000-0x00000000E8680000 Flash Pre-Erase Done, time used : 00:00:08
SecCfg Passed , 1799 BMT remark not need. Will skip Sending Preloader ... Use : preloader_x3365.bin Preloader Sent , Init passed SecCfg Passed , 1799 PartCount : 0015
Processing : Flash Write Flash now : MBR Image Flash Ok Flash now : EBR1 Image Flash Ok Flash now : UBOOT Image Flash Ok Flash now : BOOTIMG Image Flash Ok Flash now : RECOVERY Image Flash Ok Flash now : SEC_RO Image Flash Ok Flash now : LOGO Image Flash Ok Flash now : EBR2 Image Flash Ok Flash now : TEST Image Flash Ok Flash now : ANDROID Image Flash Ok Flash now : CACHE Image Flash Ok Flash now : USRDATA Image Flash Ok Flash now : FAT Image Flash Ok Flash Write Done, time used : 00:02:06
Processing : Verify Verify Passed : MBR Verify Passed : EBR1 Verify Passed : UBOOT Verify Passed : BOOTIMG Verify Passed : RECOVERY Verify Passed : SEC_RO Verify Passed : LOGO Verify Passed : EBR2 Verify Passed : TEST Verify Passed : ANDROID Verify Passed : CACHE Verify Passed : USRDATA Verify Passed : FAT Data Verify Done, time used : 00:00:39
Update RomInfo done
Done! Elapsed: 00:03:10 Reconnect Power/Cable!
  Reply With Quote
The Following 4 Users Say Thank You to kabul For This Useful Post:
Show/Hide list of the thanked
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 15:03.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.50554 seconds with 10 queries

SEO by vBSEO