Chinese Miracle-2 (Test Version) Reports: MTK/MediaTek - Page 2 - GSM-Forum

desiderium82 · 06-17-2014, 09:33

Check / Read Info

Code:

Chinese Miracle II  [MTK module] v 0.02

Operation : Check / Read Info [ v0.02 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 22 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0000
BB_CPU_SN : 685527CD88535BBA57885208C3033890
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3700 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DC , [MX] MX25U6435E
[0] : FLASH_DIE : 00C2 0025 0037 0000 
[0] : FLASH_LEN : 0x00800000
SDS : 0x00000000 , 0x00000000

Done!
Elapsed: 00:00:40
Reconnect Power/Cable!

Format FileSystem

Code:

Operation : Format FileSystem [ v0.02 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 29 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0000
BB_CPU_SN : 685527CD88535BBA57885208C3033890
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3700 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DC , [MX] MX25U6435E
[0] : FLASH_DIE : 00C2 0025 0037 0000 
[0] : FLASH_LEN : 0x00800000
SDS : 0x00000000 , 0x00000000

Backup done
Executing FFS FORMAT now...
FAT_RANGE : 0x00750000-0x007FFFFF , LEN : 0x000B0000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE

Done!
Elapsed: 00:00:14
Reconnect Power/Cable!

Repair Security

Code:

Operation : Repair Security [ v0.02 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 29 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0000
BB_CPU_SN : 685527CD88535BBA57885208C3033890
BROM Protocol Version : 05
Setting Service Mode ...
Init Ok, waiting for phone ...
Phone Initial Info : 
BB : MT6250
SW : R5001C_93_L2_V02
HW : RT50_6464_11B_HW
IMEI[1] : 352012080850018
IMEI[2] : 352012080850018
Update IMEI[1] to : 3556***********
Done!

Done!
Elapsed: 00:00:26
Reconnect Power/Cable!

DUNIYA JAMAL · 06-17-2014, 10:35

Qmobile E890 Repair Imei Done by Infinity Box

Kirumira · 06-17-2014, 12:17

Free File Sharing and Storage made Simple.

Kirumira · 06-17-2014, 12:20

Free File Sharing and Storage made Simple.

Kirumira · 06-17-2014, 12:44

TECNO T342 BY INFINITYBOX

UL11_T342_PCB01_gprs_MT6260_S00.V08_M131126_UL11_T 342_MP

Kirumira · 06-17-2014, 12:49

Kirumira · 06-17-2014, 12:52

Kirumira · 06-17-2014, 12:54

PLEASE SOLVE THAT PROBLEM

Dzirt · 06-17-2014, 13:24

1. I accept ONLY CM2MTK logs, other not interest for me at all.
2. Reset UserCode set it to Phone Default , and it can vary from 0000 , 1122, 1234 , 12345. Customer sure know it. If phone still ask code - repeat reset once more time and it must work.

marioarq · 06-17-2014, 21:48

Alcatel 3035a not work operations....Dibujo.jpg

Dzirt · 06-18-2014, 03:49

Alcatel , like and Nokia, is protected and it not supported with CM2MTK module.

rehmani · 06-18-2014, 04:33

Quote:

Originally Posted by Dzirt

Alcatel , like and Nokia, is protected and it not supported with CM2MTK module.

it is possible in future u add nokia alcatel zte etc in mtk module like u add samsung in spd module

Smart-gsm · 06-18-2014, 06:10

Quote:

Originally Posted by rehmani

it is possible in future u add nokia alcatel zte etc in mtk module like u add samsung in spd module

zte is not Protected . Should be Work . if you have zte with 652A or 6250 CPU with infinity box

Akhtar Ali Jatt · 06-18-2014, 07:00

READ INFO

Code:

Operation : Check / Read Info [ v0.02 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey ( '*' ) Wait for phone... Phone found! [ 6 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CA00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0000 BB_CPU_SN : DA7F1BD52799E12975FEB0D79492A96F BROM Protocol Version : 05 Setting... Setting done , result code 0x000E BROM stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... InitRes : 00000000 DEV[0] : C200 2500 3600 0000 DEV[1] : 0000 0000 0000 0000 DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B DA_CSTAT : 0x5A SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E [0] : FLASH_DIE : 00C2 0025 0036 0000 [0] : FLASH_LEN : 0x00300000 SDS : 0x00000000 , 0x00000000 Done! Elapsed: 00:00:04 Reconnect Power/Cable!

FORMAT

Code:

Operation : Format FileSystem [ v0.02 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey ( '*' ) Wait for phone... Phone found! [ 6 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CA00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0000 BB_CPU_SN : DA7F1BD52799E12975FEB0D79492A96F BROM Protocol Version : 05 Setting... Setting done , result code 0x000E BROM stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... InitRes : 00000000 DEV[0] : C200 2500 3600 0000 DEV[1] : 0000 0000 0000 0000 DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B DA_CSTAT : 0x5A SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E [0] : FLASH_DIE : 00C2 0025 0036 0000 [0] : FLASH_LEN : 0x00300000 SDS : 0x00000000 , 0x00000000 Backup done Executing FFS FORMAT now... FAT_RANGE : 0x002B6000-0x002FFFFF , LEN : 0x0004A000 DA_RET : DA_IN_PROGRESS DA_RET : FORMAT_DONE Done! Elapsed: 00:00:12 Reconnect Power/Cable!

RESET USER CODE

Code:

Operation : Reset UserCode [ v0.02 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey ( '*' ) Wait for phone... Phone found! [ 6 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CA00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0000 BB_CPU_SN : DA7F1BD52799E12975FEB0D79492A96F BROM Protocol Version : 05 Setting... Setting done , result code 0x000E BROM stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... InitRes : 00000000 DEV[0] : C200 2500 3600 0000 DEV[1] : 0000 0000 0000 0000 DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B DA_CSTAT : 0x5A SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E [0] : FLASH_DIE : 00C2 0025 0036 0000 [0] : FLASH_LEN : 0x00300000 SDS : 0x00000000 , 0x00000000 Backup exists , skip Read ExtData Sorting ExtData Sort Ok, Rebuild Ok Restore ExtData All done UserCode request removed UserCode set to default ( 0000 or 1122 ) Done! Elapsed: 00:00:46 Reconnect Power/Cable!

WRITE SECURITY

Code:

Operation : Repair Security [ v0.02 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey ( '*' ) Wait for phone... Phone found! [ 6 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CA00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0000 BB_CPU_SN : DA7F1BD52799E12975FEB0D79492A96F BROM Protocol Version : 05 Setting Service Mode ... Init Ok, waiting for phone ... Phone Initial Info : BB : MT6260 SW : R021_QMOBILE_V01.14_20131218 HW : R023_V01 IMEI[1] : 354485015672079 IMEI[2] : 354485015672079 Update IMEI[1] to : 359418050034447 Update IMEI[2] to : 359418050034439 Done! Done! Elapsed: 00:02:15 Reconnect Power/Cable!

READ FLASH

Code:

Operation : Read Flash [ v0.02 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey ( '*' ) Wait for phone... Phone found! [ 6 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CA00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0000 BB_CPU_SN : DA7F1BD52799E12975FEB0D79492A96F BROM Protocol Version : 05 Setting... Setting done , result code 0x000E BROM stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... InitRes : 00000000 DEV[0] : C200 2500 3600 0000 DEV[1] : 0000 0000 0000 0000 DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B DA_CSTAT : 0x5A SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E [0] : FLASH_DIE : 00C2 0025 0036 0000 [0] : FLASH_LEN : 0x00300000 SDS : 0x00000000 , 0x00000000 Read Flash now Read Ok , 3145728 bytes read Check and collect compile info File_Info : R021_QMOBILE_PCB01_gsm_MT6260_S00.R021_QMOBILE_V01_14_20131218.bin FileVersion : R021_QMOBILE_V01.14_20131218 Saved to : C:\InfinityBox\CM2MTK\Read_out\R021_QMOBILE_PCB01_gsm_MT6260_S00.R021_QMOBILE_V01_14_20131218.bin Done! Elapsed: 00:00:19 Reconnect Power/Cable!

WRITE FLASH

Code:

Chinese Miracle II [MTK module] v 0.02 Load File Load File File_Info : R021_QMOBILE_PCB01_gsm_MT6260_S00.R021_QMOBILE_V01_08_20130924.bin FileVersion : R021_QMOBILE_V01.08_20130924 Load File Ok Operation : Flash [ v0.02 ] ======= Flash Files set for flashing : [ MCU ] : qmobile g200 ok r021_qmobile_pcb01_gsm_mt6260_s00.r021_qmobile_v01_08_20130924.bin 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey ( '*' ) Wait for phone... Phone found! [ 6 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CA00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0000 BB_CPU_SN : DA7F1BD52799E12975FEB0D79492A96F BROM Protocol Version : 05 Setting... Setting done , result code 0x000E BROM stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... InitRes : 00000000 DEV[0] : C200 2500 3600 0000 DEV[1] : 0000 0000 0000 0000 DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B DA_CSTAT : 0x5A SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E [0] : FLASH_DIE : 00C2 0025 0036 0000 [0] : FLASH_LEN : 0x00300000 SDS : 0x00000000 , 0x00000000 Erase region , wait ... Write data , wait ... Write : qmobile g200 ok r021_qmobile_pcb01_gsm_mt6260_s00.r021_qmobile_v01_08_20130924.bin Done! Elapsed: 00:00:55 Reconnect Power/Cable!

http://forum.gsmhosting.com/vbb/f425...l#post10382734

Dzirt · 06-18-2014, 07:06

Quote:

Originally Posted by rehmani

it is possible in future u add nokia alcatel zte etc in mtk module like u add samsung in spd module

If will be phones - why not?

Will try. But will be great, if someone can make " list " with MTKx based phones, which are not supported by MModule.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-17-2014, 10:35	#17 (permalink)
DUNIYA JAMAL No Life Poster Join Date: Oct 2005 Location: Pakistan Posts: 1,922 Member: 192810 Status: Offline Sonork: Some people NEED change Thanks Meter: 860	Qmobile E890 Repair Imei Done by Infinity Box

06-17-2014, 12:17	#18 (permalink)
Kirumira No Life Poster Join Date: Dec 2004 Location: Uganda Age: 45 Posts: 2,919 Member: 96478 Status: Offline Sonork: 100.1674604 Thanks Meter: 1,420	Free File Sharing and Storage made Simple.

06-17-2014, 12:20	#19 (permalink)
Kirumira No Life Poster Join Date: Dec 2004 Location: Uganda Age: 45 Posts: 2,919 Member: 96478 Status: Offline Sonork: 100.1674604 Thanks Meter: 1,420	Free File Sharing and Storage made Simple.

06-17-2014, 12:44	#20 (permalink)
Kirumira No Life Poster Join Date: Dec 2004 Location: Uganda Age: 45 Posts: 2,919 Member: 96478 Status: Offline Sonork: 100.1674604 Thanks Meter: 1,420	TECNO T342 BY INFINITYBOX UL11_T342_PCB01_gprs_MT6260_S00.V08_M131126_UL11_T 342_MP

06-17-2014, 12:49	#21 (permalink)
Kirumira No Life Poster Join Date: Dec 2004 Location: Uganda Age: 45 Posts: 2,919 Member: 96478 Status: Offline Sonork: 100.1674604 Thanks Meter: 1,420

06-17-2014, 12:52	#22 (permalink)
Kirumira No Life Poster Join Date: Dec 2004 Location: Uganda Age: 45 Posts: 2,919 Member: 96478 Status: Offline Sonork: 100.1674604 Thanks Meter: 1,420

06-17-2014, 12:54	#23 (permalink)
Kirumira No Life Poster Join Date: Dec 2004 Location: Uganda Age: 45 Posts: 2,919 Member: 96478 Status: Offline Sonork: 100.1674604 Thanks Meter: 1,420	PLEASE SOLVE THAT PROBLEM

06-17-2014, 13:24	#24 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	1. I accept ONLY CM2MTK logs, other not interest for me at all. 2. Reset UserCode set it to Phone Default , and it can vary from 0000 , 1122, 1234 , 12345. Customer sure know it. If phone still ask code - repeat reset once more time and it must work.

06-17-2014, 21:48	#25 (permalink)
marioarq Freak Poster Join Date: Dec 2005 Location: Ecuador Posts: 135 Member: 205346 Status: Offline Thanks Meter: 26	Alcatel 3035a not work operations....Dibujo.jpg

06-18-2014, 03:49	#26 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Alcatel , like and Nokia, is protected and it not supported with CM2MTK module.