Chinese Miracle-2 (Test Version) Reports: RDA/Coolsand - Page 16 - GSM-Forum

Dzirt · 06-24-2014, 15:15

Quote:

Originally Posted by chkhurram_457

sir all sets are showing same error.
all set's cpu are dead?

Check your port settings (latecy - set to 1)
Press and hold power button longer, until it not show in log - release button.

bright hlatini · 06-30-2014, 11:52

CALSEN 7322 READ INFO AND USER CODE DONE WITH INFINITY BOX RDA

Card found: S/N
Chinese Miracle II [RDA module] v 0.06

Operation : Check Device / Info
======= Settings
Settings : Read AllInfo is Off
Settings : Full Boot disabled by default

Com Port Opened
Press and hold POWER button!
Waiting phone
Init Ok
1st boot Ok
==== CPU
CPU_ID : 8809 , rev : 4005
CPU_CN : RDA Mirco CT , RDA8851
==== FLASH
FL_VEN : 40C8 , rev : 1600
FL_CNM : GigaDevice , GD25Q32
FL_CAP : 00400000
==== Booting
Sending RamRun Loader...
Use : 8809_00400000.fp
Sending HdrConf ...
Sending LdrData ...
Loader sent, starting...
Loader run
Boot Ok
Release Power button!
Boot Done!

Elapsed: 00:00:06
Done
Reconnect Power/Cable!

Operation : Read User Code
Com Port Opened
Press and hold POWER button!
Waiting phone
Init Ok
1st boot Ok
==== CPU
CPU_ID : 8809 , rev : 4005
CPU_CN : RDA Mirco CT , RDA8851
==== FLASH
FL_VEN : 40C8 , rev : 1600
FL_CNM : GigaDevice , GD25Q32
FL_CAP : 00400000
==== Booting
Sending RamRun Loader...
Use : 8809_00400000.fp
Sending HdrConf ...
Sending LdrData ...
Loader sent, starting...
Loader run
Boot Ok
Release Power button!
Boot Done!

Read UDA now , wait ...
Read done, sorting EXTData
Following items found :
Item : VDS0
Item : NVRAM
Required data found, extracting code

UserCode : 5847

Elapsed: 00:00:59
Done
Reconnect Power/Cable!

n2roy · 11-15-2014, 10:09

you Infinity team *****. you wastes my 12000 rupees mony. I brought it 3 years ago but that time you didn't give us update for spd,coolsand and new mtk cpu support.

YellowBoss · 11-15-2014, 11:39

@n2roy
You are completely wrong, my Dear Friend !
You can use new software for MTK/SPD/RDA.

Two options available:

1. FREE: Chinese Miracle-2 v 0.XX (Test Version)

- http://forum.gsmhosting.com/vbb/f296...ocess-1867818/

2. Not free: Chinese Miracle-2 v 1.XX (Release) + New Updates/Support

- http://forum.gsmhosting.com/vbb/f296...012-a-1391471/

- http://forum.gsmhosting.com/vbb/f296...ocess-1865047/

Please check both and select what you need.

ahmadindia · 12-13-2014, 09:34

when we open CM2MTK but it shows dongle firmware[0118] is out of date! Download latest upgrade-client(DongleManager) from support area and upgrade dongle firmware but i have up to dated from DongleManager and also activated chinese meracle free version from support.

***MyGSM World*** · 12-13-2014, 11:48

Quote:

Originally Posted by ahmadindia

when we open CM2MTK but it shows dongle firmware[0118] is out of date! Download latest upgrade-client(DongleManager) from support area and upgrade dongle firmware but i have up to dated from DongleManager and also activated chinese meracle free version from support.

Dear Friend,

Two options available:

1. FREE: Chinese Miracle-2 v 0.XX (Test Version)

- http://forum.gsmhosting.com/vbb/f296...ocess-1867818/

2. Not free: Chinese Miracle-2 v 1.XX (Release) + New Updates/Support

- http://forum.gsmhosting.com/vbb/f296...012-a-1391471/

- http://forum.gsmhosting.com/vbb/f296...ocess-1865047/

Please check both and select what you need.

bighiner · 02-12-2015, 20:15

what about best user? im still wait from octomber aboout this update!

Thx and im sure that u will do this possible!

BR,
Pr3dict3r

YellowBoss · 02-12-2015, 22:25

Quote:

Originally Posted by bighiner

what about best user? im still wait from octomber aboout this update!

Thx and im sure that u will do this possible!

BR,
Pr3dict3r

Hello,

CM is an ordinary update for Main Infiniy-Box users (Multibrand tool).

[BEST] is a tool for Nokia.

We have a plans to release CM2 as an activation for [BEST] users but we can not tell you date/price for now.

::Pak_Flasher:: · 02-12-2015, 22:52

Quote:

Originally Posted by YellowBoss

Hello,

CM is an ordinary update for Main Infiniy-Box users (Multibrand tool).

[BEST] is a tool for Nokia.

We have a plans to release CM2 as an activation for [BEST] users but we can not tell you date/price for now.

please release activation for best many user waing including me.

PASSIONATE_BOYS · 02-13-2015, 07:33

Quote:

Originally Posted by ::Pak_Flasher::

please release activation for best many user waing including me.

Hello,
It's not easy to merge activations due to security reasons. But team is already working since we also know many CDMA-Tool and BEST users are waiting. So if any news will be there it will be posted without any late.

Br.

YellowBoss · 07-05-2015, 11:22

Quote:

Originally Posted by ::Pak_Flasher::

please release activation for best many user waing including me.

Test Version now available for [BEST] users: http://forum.gsmhosting.com/vbb/f641...users-1958313/

YellowBoss · 09-16-2015, 14:13

Quote:

Originally Posted by ::Pak_Flasher::

please release activation for best many user waing including me.

Hello,

Now its possible to activate CM2 for Infinity [BEST] and for Infinity CDMA-Tool - http://forum.gsmhosting.com/vbb/f641...ongle-1973526/

usman_habibi · 01-07-2017, 07:36

sir alot of thanks bundle of thanks all your uploaded daigram is 1000% worked

aikonmani · 09-22-2017, 08:03

Anybody know?

BOOT KEY?

NOKIA 230 RDA RDA8851C CT8851C

mwanjelwa2016 · 03-16-2018, 09:18

Card found : S/N : 4ECD2B7D , v0136
Chinese Miracle II [RDA module] v 1.05

Operation : Read FullFlash
======= Settings
Settings : SafeMode is Off [Fast]
Settings : Make IFF (MCU) file
Settings : Make Calibration file

Waiting phone ...
Connect battery, press and hold '0' button
Connect USB cable and keep hold button, until phone will be detected
Init : CCCCCCCC
Settings registers ...
1st boot Ok
==== CPU
CPU_ID : 0809 , rev : 0007
CPU_CN :
==== FLASH
FL_VEN : 0000 , rev : 0000
FL_CNM :
FL_CAP : 00000000
Initial : 81C0024C
==== Booting
Sending RamRun Loader ...
Set : 0809 , 00000000
Boot File Not Found! CPU not Supported , or BootFiles are missng. Contact to Support!

Reconnect Power/Cable!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-30-2014, 11:52	#227 (permalink)
bright hlatini No Life Poster Join Date: Jul 2011 Location: malawi Posts: 1,121 Member: 1614640 Status: Offline Thanks Meter: 468	CALSEN 7322 READ INFO AND USER CODE DONE WITH INFINITY BOX RDA Card found: S/N Chinese Miracle II [RDA module] v 0.06 Operation : Check Device / Info ======= Settings Settings : Read AllInfo is Off Settings : Full Boot disabled by default Com Port Opened Press and hold POWER button! Waiting phone Init Ok 1st boot Ok ==== CPU CPU_ID : 8809 , rev : 4005 CPU_CN : RDA Mirco CT , RDA8851 ==== FLASH FL_VEN : 40C8 , rev : 1600 FL_CNM : GigaDevice , GD25Q32 FL_CAP : 00400000 ==== Booting Sending RamRun Loader... Use : 8809_00400000.fp Sending HdrConf ... Sending LdrData ... Loader sent, starting... Loader run Boot Ok Release Power button! Boot Done! Elapsed: 00:00:06 Done Reconnect Power/Cable! Operation : Read User Code Com Port Opened Press and hold POWER button! Waiting phone Init Ok 1st boot Ok ==== CPU CPU_ID : 8809 , rev : 4005 CPU_CN : RDA Mirco CT , RDA8851 ==== FLASH FL_VEN : 40C8 , rev : 1600 FL_CNM : GigaDevice , GD25Q32 FL_CAP : 00400000 ==== Booting Sending RamRun Loader... Use : 8809_00400000.fp Sending HdrConf ... Sending LdrData ... Loader sent, starting... Loader run Boot Ok Release Power button! Boot Done! Read UDA now , wait ... Read done, sorting EXTData Following items found : Item : VDS0 Item : NVRAM Required data found, extracting code UserCode : 5847 Elapsed: 00:00:59 Done Reconnect Power/Cable!

11-15-2014, 10:09	#228 (permalink)
n2roy Freak Poster Join Date: Dec 2009 Location: Raiganj Age: 37 Posts: 433 Member: 1175794 Status: Offline Thanks Meter: 186	you Infinity team *****. you wastes my 12000 rupees mony. I brought it 3 years ago but that time you didn't give us update for spd,coolsand and new mtk cpu support.

11-15-2014, 11:39	#229 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,453 Member: 1043909 Status: Offline Thanks Meter: 60,921	@n2roy You are completely wrong, my Dear Friend ! You can use new software for MTK/SPD/RDA. Two options available: 1. FREE: Chinese Miracle-2 v 0.XX (Test Version) - http://forum.gsmhosting.com/vbb/f296...ocess-1867818/ 2. Not free: Chinese Miracle-2 v 1.XX (Release) + New Updates/Support - http://forum.gsmhosting.com/vbb/f296...012-a-1391471/ - http://forum.gsmhosting.com/vbb/f296...ocess-1865047/ Please check both and select what you need.

12-13-2014, 09:34	#230 (permalink)
ahmadindia Registered User Join Date: Dec 2006 Location: bakerganj,patna,bihar Posts: 87 Member: 418807 Status: Offline Thanks Meter: 12	when we open CM2MTK but it shows dongle firmware[0118] is out of date! Download latest upgrade-client(DongleManager) from support area and upgrade dongle firmware but i have up to dated from DongleManager and also activated chinese meracle free version from support.

02-12-2015, 20:15	#232 (permalink)
bighiner No Life Poster Join Date: Jan 2008 Location: Hell Posts: 713 Member: 679176 Status: Offline Sonork: 1585224 Thanks Meter: 119	what about best user? im still wait from octomber aboout this update! Thx and im sure that u will do this possible! BR, Pr3dict3r

01-07-2017, 07:36	#238 (permalink)
usman_habibi Major Poster Join Date: Jan 2017 Location: peshawar, thall, pakistan Posts: 45 Member: 2669033 Status: Offline Sonork: 100.1676548 Thanks Meter: 10	sir alot of thanks bundle of thanks all your uploaded daigram is 1000% worked

09-22-2017, 08:03	#239 (permalink)
aikonmani No Life Poster Join Date: Jul 2006 Location: INDIA,TAMILNADU,PATTUKKOTTAI Posts: 1,082 Member: 304090 Status: Offline Thanks Meter: 210	Anybody know? BOOT KEY? NOKIA 230 RDA RDA8851C CT8851C

03-16-2018, 09:18	#240 (permalink)
mwanjelwa2016 Junior Member Join Date: Jan 2016 Posts: 29 Member: 2514648 Status: Offline Sonork: 100.1622803 Thanks Meter: 0	Card found : S/N : 4ECD2B7D , v0136 Chinese Miracle II [RDA module] v 1.05 Operation : Read FullFlash ======= Settings Settings : SafeMode is Off [Fast] Settings : Make IFF (MCU) file Settings : Make Calibration file Waiting phone ... Connect battery, press and hold '0' button Connect USB cable and keep hold button, until phone will be detected Init : CCCCCCCC Settings registers ... 1st boot Ok ==== CPU CPU_ID : 0809 , rev : 0007 CPU_CN : ==== FLASH FL_VEN : 0000 , rev : 0000 FL_CNM : FL_CAP : 00000000 Initial : 81C0024C ==== Booting Sending RamRun Loader ... Set : 0809 , 00000000 Boot File Not Found! CPU not Supported , or BootFiles are missng. Contact to Support! Reconnect Power/Cable!