ChineseMiracle test pin outs - GSM-Forum

paklink · 06-04-2007, 12:40

TO ALL FORUM MEMBER
DEU TO ALOT OF CHIENSE MOBILE IN MARKET ( SAME MODEL BUT DIFFRINT CONECTER & PIN OUTS) I DECIDE TO MAKE THIS POST

1: HERE ONLY POST TESTED PIN OUTS WITH COMPLETE DETAIL OF MOBILE MODEL (IF POSSIBALE THEN POST PHONE PIC TOO)

2: ONLY POST TESTED PIN OUT HERE DON'T ASK ANY PIN OUT IN THIS THREAD .

3: I POST 2 SAMPLE ( TESTED PIN OUTS ) HERE TO KNOW FOR ALL WHO POST PIN OUTS

4: DON'T SAY THANKS , OTHER WORD OR WRONG PIN OUOTS HERE ONLY POST TESTED PIN OUT
PIN OUTS FOR GRADIENTE GF950

KEYBOARD TOP
1.........14

7: phone Gnd (RJ45 pin 7,8)
8: Phone Rx (RJ45 pin 2)
9: Phone Tx (RJ45 pin 3)

OR BY PIC LIEK ATTACH TREND T100 PIN OUTS

THX ALOT FOR ALL & REQUEST TO MAKE THIS POST STICKY

ticoichip · 06-05-2007, 08:48

do you have pinout standard for 2*12 ?

nishaon · 06-06-2007, 00:46

N95 PDA tested pin outs

connector_2x5_mini

standard pin count

_______________

/ 1 2 3 4 5 \

| 6 7 8 9 10 |

-----------------

====================

connector_2x5_mini

4: Rx rj45 pin 2

5: Tx rj45 pin 3

6: Gnd rj 45 pin 7/8

kasner · 06-12-2007, 11:02

Quote:

Originally Posted by nishaon

N95 PDA tested pin outs

connector_2x5_mini

standard pin count

_______________

/ 1 2 3 4 5 \

| 6 7 8 9 10 |

-----------------

====================

connector_2x5_mini

4: Rx rj45 pin 2

5: Tx rj45 pin 3

6: Gnd rj 45 pin 7/8

TNX. Very usefull. Tested 100%

BR Kasner

moorthy · 08-29-2007, 12:51

china nokia n95 pda 18pin out pls help me

stanner_austin · 08-29-2007, 13:43

Quote:

Originally Posted by moorthy

china nokia n95 pda 18pin out pls help me

open phone check for rx tx and gnd at pcb..
you just need this only to connect phone.

Afzaal · 08-29-2007, 13:52

Much More

to Read

samgsm · 08-29-2007, 17:45

Quote:

Originally Posted by stanner_austin

open phone check for rx tx and gnd at pcb..
you just need this only to connect phone.

I have one phone with 18 pin connector.
according to you I open my phone and find some points named like
RX_A, RX_B, TX_A, TX_B, GND, POWER_A, POWER_B, VBAT
THIS SIX POINTS ARE AS:
RX_A TX_A POWER_B POWER_A

TX_B RX_A GND VBAT

I CHECK CONITINUITY FROM CONNECTOR TO THESE POINTS
TX_A AND RX_A AND GND WAS CONNECTED TO CONNECTOR..
I CONNECTED MY RJ45 CABLE WIRES LIKE THIS
RJ45 NO2 POINT TO TX_A
RJ45 NO3 POINT TO RX_A
RJ45 NO8 POINT TO GND
AND I TRIED TO CONNECT ON INFINITY BUT IT IS NOT RESPONDING..
I used bettery and when i press and release power button there was a blink on tx
point of my infinity box...
Do u have solution for this?? or you have different way to repair??
Thanks

Sam-TheMaster · 08-29-2007, 17:56

Quote:

Originally Posted by moorthy

china nokia n95 pda 18pin out pls help me

keyboard top...
1..........................18

1-2 GND

8- Tx

10- Rx

Check by alternating rx tx cause I didn't remarked perfectly cause that phone was not longer with me... I hope you will find out this usefull
for more testing U can open phone and find that points typed already as stanner austing told..

Wbr..

stanner_austin · 08-29-2007, 18:43

Quote:

Originally Posted by samgsm

I have one phone with 18 pin connector.
according to you I open my phone and find some points named like
RX_A, RX_B, TX_A, TX_B, GND, POWER_A, POWER_B, VBAT
THIS SIX POINTS ARE AS:
RX_A TX_A POWER_B POWER_A

TX_B RX_A GND VBAT

I CHECK CONITINUITY FROM CONNECTOR TO THESE POINTS
TX_A AND RX_A AND GND WAS CONNECTED TO CONNECTOR..
I CONNECTED MY RJ45 CABLE WIRES LIKE THIS
RJ45 NO2 POINT TO TX_A
RJ45 NO3 POINT TO RX_A
RJ45 NO8 POINT TO GND
AND I TRIED TO CONNECT ON INFINITY BUT IT IS NOT RESPONDING..
I used bettery and when i press and release power button there was a blink on tx
point of my infinity box...
Do u have solution for this?? or you have different way to repair??
Thanks

good u have found at pcb..
just invert tx as rx and rx as tx..
and tick on auto detect bualrate.
when its show u press power on press and hold power on untill its show u release power on botton.

david laborator · 08-29-2007, 19:12

looking for cect s560 standard connector 1X18 pinout , phone double sreen open like e700 1.3megapixel

thanx in advice

kaino147 · 08-30-2007, 13:56

Paklink, i've waited for u to come online so i can order the cables but can't get u online. I want to give u info of my purchase, Pls if u can't come online, give me a phone number to which i can reach u, so i can order my chinese miracle cable set.

paklink · 08-30-2007, 17:27

Quote:

Originally Posted by kaino147

Paklink, i've waited for u to come online so i can order the cables but can't get u online. I want to give u info of my purchase, Pls if u can't come online, give me a phone number to which i can reach u, so i can order my chinese miracle cable set.

see ur PM

so bz these days so plz send me email

jothi737 · 08-31-2007, 06:56

hello Gaurav_Radadiya

many time i post this solution u must serch

n95 pda 1x18 pin

1,2,---ground
7-----tx
9-----rx

Sam-TheMaster · 08-31-2007, 07:08

Quote:

Originally Posted by jothi737

hello Gaurav_Radadiya

many time i post this solution u must serch

n95 pda 1x18 pin

1,2,---ground
7-----tx
9-----rx

May be my counting problem! Cause it was with me for only 4-5 minutes...

Well easy solution Use ETBOX Cable of Spice S500 model..
Use it with infinity and check out.. its wrking!

By the way I repaired that phone with Points to direct PCB and successfully solved my problem

With Best Of Luck!

08-29-2007, 12:51	#5 (permalink)
moorthy Freak Poster Join Date: Aug 2003 Location: india Age: 52 Posts: 313 Member: 37523 Status: Offline Thanks Meter: 32	china nokia n95 pda 18pin out china nokia n95 pda 18pin out pls help me

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
<< N95 8GB Tested Pin-out >>	jhepoy_org	Infinity-Box	8	03-20-2009 14:57
Tested M8380 pin out successfully format	LogoMan	Infinity-Box	1	01-22-2008 21:56
Sharp Gx30 Pin Out Tested Look	sunnyc	Sharp	4	10-07-2004 06:57
Pin out Test point Toshiba Ts21i	xareme	Various	5	04-07-2004 13:48
Samsung cable pin-out - tested	m.com	Samsung Flashers, Software, Firmware.	5	02-23-2002 11:50

06-05-2007, 08:48	#2 (permalink)
ticoichip No Life Poster Join Date: Oct 2005 Posts: 688 Member: 194302 Status: Offline Thanks Meter: 32	do you have pinout standard for *212** ?

06-06-2007, 00:46	#3 (permalink)
nishaon No Life Poster Join Date: Jan 2006 Location: Deep Blue G.S.M. Posts: 2,369 Member: 225229 Status: Offline Thanks Meter: 90	N95 PDA tested pin outs connector_2x5_mini standard pin count _______________ / 1 2 3 4 5 \ \| 6 7 8 9 10 \| ----------------- ==================== connector_2x5_mini 4: Rx rj45 pin 2 5: Tx rj45 pin 3 6: Gnd rj 45 pin 7/8

08-29-2007, 13:52	#7 (permalink)
Afzaal No Life Poster Join Date: Mar 2005 Location: lets See. Posts: 3,399 Member: 128918 Status: Offline Thanks Meter: 282	Much More to Read

08-29-2007, 19:12	#11 (permalink)
david laborator No Life Poster Join Date: Feb 2006 Location: Tanzania but U cant see me !!! Age: 43 Posts: 887 Member: 228601 Status: Offline Thanks Meter: 56	looking for cect s560 standard connector 1X18 pinout , phone double sreen open like e700 1.3megapixel thanx in advice

08-30-2007, 13:56	#12 (permalink)
kaino147 No Life Poster Join Date: Feb 2004 Location: NIGERIA, DELTA STATE, WARRI Posts: 867 Member: 53891 Status: Offline Thanks Meter: 41	Paklink, i've waited for u to come online so i can order the cables but can't get u online. I want to give u info of my purchase, Pls if u can't come online, give me a phone number to which i can reach u, so i can order my chinese miracle cable set.

08-31-2007, 06:56	#14 (permalink)
jothi737 Freak Poster Join Date: Oct 2006 Location: INDIA TAMILNADU SALEM Posts: 288 Member: 369539 Status: Offline Sonork: 1584109 Thanks Meter: 32	hello Gaurav_Radadiya many time i post this solution u must serch n95 pda 1x18 pin 1,2,---ground 7-----tx 9-----rx