CM2 Show some MTK SP Locked phone unlocked and can not be unlocked - GSM-Forum

NKhan_Gsm · 03-31-2016, 11:19

I received a BLU Dash 3.5 II MTK6582 SP Locked but when want to unlock by CM2 in Read Code show false and in Direct Unlock show Not Locked!
here is logs:

Quote:

Operation : SP Unlock [ v1.44 ]
Mode : Read Codes

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use SecMode DA
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483447326111012CB7B9B8A215
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A483447326111012CB7B9B8A215
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 8EC6F84782C9B378D007CEE2C1A29DE4
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Slot[1] SIMLock Info :
[1] Level , [Locked] : False
[2] Level , [Locked] : False
[3] Level , [Locked] : False
[4] Level , [Locked] : False
[5] Level , [Locked] : False
[6] Level , [Locked] : False
[7] Level , [Locked] : False

Slot[2] SIMLock Info :
[1] Level , [Locked] : False
[2] Level , [Locked] : False
[3] Level , [Locked] : False
[4] Level , [Locked] : False
[5] Level , [Locked] : False
[6] Level , [Locked] : False
[7] Level , [Locked] : False

Done!
Elapsed: 00:00:17
Reconnect Power/Cable!

Operation : SP Unlock [ v1.44 ]
Mode : Direct Unlock

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use SecMode DA
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483447326111012CB7B9B8A215
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A483447326111012CB7B9B8A215
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 8EC6F84782C9B378D007CEE2C1A29DE4
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Lock Status : Not Locked!

Done!
Elapsed: 00:00:15
Reconnect Power/Cable!

and also I had another same problem with a secure boot Chinese MTK6571 SP locked phone

http://forum.gsmhosting.com/vbb/f296.../#post11662839

WBR

JayDi · 03-31-2016, 12:56

Does phone asks for any code?
Can try backup NVRAM, then make Fix Unknown BB with "Deep Fix" option, restore NVRAM and check after.

MVNDOzone · 03-31-2016, 13:43

try write factory firmware
and do unlock again

NKhan_Gsm · 03-31-2016, 17:07

Quote:

Originally Posted by JayDi

Does phone asks for any code?
Can try backup NVRAM, then make Fix Unknown BB with "Deep Fix" option, restore NVRAM and check after.

Yes sir phone ask for code no sir returned it back because I had only one hour to unlock it. This phone is not secure boot and also I have its NVRAM backup if you need I cant send it to you. This phone has been unlocked by ****** MTK tool.

P.S Sir I have sent you information about that Secure boot MTK6571 locked phone and also Emailed to Infinity team but still I haven't received any respond from you I have ten Pieces and many more are waiting for your solution.

WBR

JayDi · 03-31-2016, 17:51

I not need any backup. Way has been explained in my previous post.
About rest - all data, which come to email processed already. About unlock exactly - have no idea without samples on hands.

03-31-2016, 12:56	#2 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Does phone asks for any code? Can try backup NVRAM, then make Fix Unknown BB with "Deep Fix" option, restore NVRAM and check after.

03-31-2016, 13:43	#3 (permalink)
MVNDOzone No Life Poster Join Date: Aug 2010 Posts: 596 Member: 1372118 Status: Offline Thanks Meter: 139	try write factory firmware and do unlock again

03-31-2016, 17:51	#5 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	I not need any backup. Way has been explained in my previous post. About rest - all data, which come to email processed already. About unlock exactly - have no idea without samples on hands.