GSM-Forum
Page 1 of 12 1 23411 Last »
Show 50 post(s) from this thread on one page

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)
-   -   ..::CM2MT2 SECURE BOOT SUCCESS REPORT STARTs::.. (https://forum.gsmhosting.com/vbb/f296/cm2mt2-secure-boot-success-report-starts-2384253/)

gracy_elec 04-16-2018 14:32
..::CM2MT2 SECURE BOOT SUCCESS REPORT STARTs::..
 
SUCCESSFULLY READ INFO (OPPO F5 CPH1723EX MT6763)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Identify [ v2.00 r1 ]

Quote:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6763
EMI : SRC : preloader_oppo6763_17031.bin
EMI : CNT : 000F
EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [0 B ]
EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG | DEV : DH6DMB : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG | DEV : 3H6CMB : RAM : [ 6.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG | DEV : GE6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG | DEV : RD64MB : RAM : [ 4.00 GB ]
EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : UNKNOWN | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100525836344D4203E046DA2B84D5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : EE09697D43DC32B25D65CFBCA266D28E

DA : USB : HIGH-SPEED

Boot done!

Patch Level : N6F26Q
Ver. CodeName : REL
Ver. Release : 7.1.1
Sec. Patch : 2017-10-05
Build Time : 1508524623
Product Manfct : OPPO
Board Platform : mt6763
Product Model : OPPO CPH1723
Product Brand : OPPO
Product Name : CPH1723
Product Device : M6763A
Product Board : full_oppo6763_17031
Product Info : oppo6763_17031
SW Version : A.02
SW OTA Version : M6763A_11.A.02_0020_201710210033
SW OTA Name : CPH1723EX_11_A.02_171021
Display ID : CPH1723EX_11_A.02_171021
Kernel Info : 4.4.22-G201710210033

NVRAM check : Passed!

Done!
Elapsed: 00:00:27
THANKS INFINITY-BOX TEAM

gracy_elec 04-16-2018 14:45
..::OPPO F5 CPH1723EX MT6763 SECURE BOOT READ FIRMWARE Done::..
 
SUCCESSFULLY READ FIRMWARE(OPPO F5 CPH1723EX MT6763)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Read Firmware [ v2.00 r1 ]
Quote:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6763
EMI : SRC : preloader_oppo6763_17031.bin
EMI : CNT : 000F
EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [0 B ]
EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG | DEV : DH6DMB : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG | DEV : 3H6CMB : RAM : [ 6.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG | DEV : GE6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG | DEV : RD64MB : RAM : [ 4.00 GB ]
EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : UNKNOWN | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100525836344D4203E046DA2B84D5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : EE09697D43DC32B25D65CFBCA266D28E

DA : USB : HIGH-SPEED

Boot done!

Patch Level : N6F26Q
Ver. CodeName : REL
Ver. Release : 7.1.1
Sec. Patch : 2017-10-05
Build Time : 1508524623
Product Manfct : OPPO
Board Platform : mt6763
Product Model : OPPO CPH1723
Product Brand : OPPO
Product Name : CPH1723
Product Device : M6763A
Product Board : full_oppo6763_17031
Product Info : oppo6763_17031
SW Version : A.02
SW OTA Version : M6763A_11.A.02_0020_201710210033
SW OTA Name : CPH1723EX_11_A.02_171021
Display ID : CPH1723EX_11_A.02_171021
Kernel Info : 4.4.22-G201710210033

MT6763__OPPO__OPPO_CPH1723__7.1.1__CPH1723EX_11_A. 02_171021__N6F26Q__oppo6763_17031

Read : preloader.bin
Read : recovery.img
Read : oppo_custom.img
Read : persist.img
ExtSparse : Compression ratio : 100%
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : tinysys-sspm.bin
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : tz.img
Read : system.img
ExtSparse : Compression ratio : 26%
Read : cache.img
Read : userdata.img

Android Info saved : _Android_info.txt
Scatter : MT6763_Android_scatter.txt
Saved to : G:\OPPO BACKUP \MT6763__OPPO__OPPO_CPH1723__7.1.1__CPH1723EX_11_A .02_171021__N6F26Q__oppo6763_17031\

Done!
Elapsed: 00:08:40
THANKS INFINITY-BOX TEAM

gracy_elec 04-16-2018 14:52
..::OPPO F5 CPH1723EX MT6763 SECURE BOOT READ NVRAM Done::..
 
SUCCESSFULLY READ NVRAM(OPPO F5 CPH1723EX MT6763)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Read Security [ v2.00 r1 ]
Quote:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6763
EMI : SRC : preloader_oppo6763_17031.bin
EMI : CNT : 000F
EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [0 B ]
EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG | DEV : DH6DMB : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG | DEV : 3H6CMB : RAM : [ 6.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG | DEV : GE6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG | DEV : RD64MB : RAM : [ 4.00 GB ]
EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : UNKNOWN | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100525836344D4203E046DA2B84D5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : EE09697D43DC32B25D65CFBCA266D28E

DA : USB : HIGH-SPEED

Boot done!


NVRAM check : Passed!

NVM saved as : MT6763__eMMC__.mt_sec
NVM saved to : G:\OPPO BACKUP\

Done!
Elapsed: 00:00:27

Reconnect Power/Cable!
THANKS INFINITY-BOX TEAM

gracy_elec 04-16-2018 15:15
..::OPPO F5 CPH1723EX MT6763 SECURE BOOT Memory Tool Init DONE::..
 
SUCCESSFULLY CONNECT MEMORYTOOL[eMMC](OPPO F5 CPH1723EX MT6763)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Memory Tool Init [ v2.00 r1 ]
Quote:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6763
EMI : SRC : preloader_oppo6763_17031.bin
EMI : CNT : 000F
EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [0 B ]
EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG | DEV : DH6DMB : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG | DEV : 3H6CMB : RAM : [ 6.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG | DEV : GE6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG | DEV : RD64MB : RAM : [ 4.00 GB ]
EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : UNKNOWN | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100525836344D4203E046DA2B84D5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : EE09697D43DC32B25D65CFBCA266D28E

DA : USB : HIGH-SPEED

Boot done!

Set default path : C:\InfinityBox\CM2MT2\phdata\

Ready!
https://s26.postimg.cc/m2unguwp5/Untitled.jpg

THANKS INFINITY-BOX TEAM

shailccna 04-16-2018 15:24
now post a screen shot with flash this set with reded firmware. wating for screen shot

mabo13 04-16-2018 15:30
please direct link of InfinityBox_install_CM2MT2_v2.00.7z

TALHAGSM 04-16-2018 15:36
Quote:
Originally Posted by mabo13 (Post 13081889)
please direct link of InfinityBox_install_CM2MT2_v2.00.7z
link is here.

https://drive.google.com/file/d/12gQ...flLsjcuSV/view

gracy_elec 04-17-2018 09:29
..::OPPO F1 PLUS A1601EX MT6750|MT6755 SECURE BOOT READ INFO Done::..
 
SUCCESSFULLY READ INFO (OPPO F1S PLUS A1601EX MT6750)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Identify [ v2.00 r1 ]
Quote:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInTwo_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 90014A484247346132A41836740573FD
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 71FCD0B2E60D9F37CCEF56F74B57EA

DA : USB : FULL-SPEED

Boot done!

Product Model : A1601
Product Brand : OPPO
Product Name : A1601
Product Device : A1601
Product Board : full_oppo6750_15331
Product Info : oppo6750_15331
SW Version : A.32
SW OTA Version : A1601EX_11.A.32_INT_032_201707211426
SW OTA Name : A1601EX_11_A.32_170721
Display ID : A1601EX_11_A.32_170721
Kernel Info : 3.10.72-G201707211426
Product Model : A1601
Product Brand : OPPO
Product Name : A1601
Product Device : A1601
Product Board : full_oppo6750_15331
Product Info : oppo6750_15331
SW Version : A.32
SW OTA Version : A1601EX_11.A.32_INT_032_201707211426
SW OTA Name : A1601EX_11_A.32_170721
Display ID : A1601EX_11_A.32_170721
Kernel Info : 3.10.72-G201707211426
Patch Level : LMY47I
Ver. CodeName : REL
Ver. Release : 5.1
Sec. Patch : 2017-05-05
Build Time : 1500621229
Product Manfct : OPPO
Board Platform : mt6750
Product Model : A1601
Product Brand : OPPO
Product Name : A1601
Product Device : A1601
Product Board : full_oppo6750_15331
Product Info : oppo6750_15331
SW Version : A.32
SW OTA Version : A1601EX_11.A.32_INT_032_201707211426
SW OTA Name : A1601EX_11_A.32_170721
Display ID : A1601EX_11_A.32_170721
Kernel Info : 3.10.72-G201707211426

IMEI[0] : 86XXXXXXXXXXXX
IMEI[1] : 86XXXXXXXXXXXX
NVRAM check : Passed!

Done!
Elapsed: 00:00:15
THANKS INFINITY-BOX TEAM

gracy_elec 04-17-2018 09:39
.::OPPO F1 PLUS A1601EX MT6750|MT6755 SECURE BOOT READ FIRMWARE Done::..
 
SUCCESSFULLY READ FIRMWARE(OPPO F1S PLUS A1601EX MT6750|MT6755)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Read Firmware [ v2.00 r1 ]
Quote:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInTwo_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 90014A484247346132A41836740573FD
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 71FCD0B2E60D9F37CCEF56F74B57EA

DA : USB : FULL-SPEED

Boot done!

Product Model : A1601
Product Brand : OPPO
Product Name : A1601
Product Device : A1601
Product Board : full_oppo6750_15331
Product Info : oppo6750_15331
SW Version : A.32
SW OTA Version : A1601EX_11.A.32_INT_032_201707211426
SW OTA Name : A1601EX_11_A.32_170721
Display ID : A1601EX_11_A.32_170721
Kernel Info : 3.10.72-G201707211426
Product Model : A1601
Product Brand : OPPO
Product Name : A1601
Product Device : A1601
Product Board : full_oppo6750_15331
Product Info : oppo6750_15331
SW Version : A.32
SW OTA Version : A1601EX_11.A.32_INT_032_201707211426
SW OTA Name : A1601EX_11_A.32_170721
Display ID : A1601EX_11_A.32_170721
Kernel Info : 3.10.72-G201707211426
Patch Level : LMY47I
Ver. CodeName : REL
Ver. Release : 5.1
Sec. Patch : 2017-05-05
Build Time : 1500621229
Product Manfct : OPPO
Board Platform : mt6750
Product Model : A1601
Product Brand : OPPO
Product Name : A1601
Product Device : A1601
Product Board : full_oppo6750_15331
Product Info : oppo6750_15331
SW Version : A.32
SW OTA Version : A1601EX_11.A.32_INT_032_201707211426
SW OTA Name : A1601EX_11_A.32_170721
Display ID : A1601EX_11_A.32_170721
Kernel Info : 3.10.72-G201707211426

MT6750__OPPO__A1601__5.1__A1601EX_11_A.32_170721__ LMY47I__oppo6750_15331

Read : preloader.bin
Read : recovery.img
Read : oppo_custom.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : md1arm7.img
Read : md3rom.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 3%
Read : cache.img
Read : userdata.img

Android Info saved : _Android_info.txt
Scatter : MT6750_Android_scatter.txt
Saved to : G:\OPPO BACKUP\MT6750__OPPO__A1601__5.1__A1601EX_11_A.32_1 70721__LMY47I__oppo6750_15331\

Done!
Elapsed: 00:05:23
THANKS INFINITY-BOX TEAM

Aamir8794 04-17-2018 09:43
can i repair IMEI oppo f5??

gracy_elec 04-17-2018 09:46
.::OPPO F1 PLUS A1601EX MT6750|MT6755 SECURE BOOT READ NVRAM Done::..
 
SUCCESSFULLY READ NVRAM(OPPO F1S PLUS A1601EX MT6750|MT6755)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Read Security [ v2.00 r1 ]
Quote:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllIn_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 90014A484247346132A41836740573FD
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 71FCD0B2E60D9F37CCEF56F74B57EA

DA : USB : FULL-SPEED

Boot done!

SEC Data :
IMEI[0] : 86XXXXXXXXXXXX
IMEI[1] : 86XXXXXXXXXXXX

NVRAM check : Passed!

NVM saved as : MT6755__eMMC__86XXXXXXXXXXX.mt_sec
NVM saved to : G:\OPPO BACKUP\

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!
THANKS INFINITY-BOX TEAM

gracy_elec 04-17-2018 09:54
.::OPPO F1 PLUS A1601EX MT6750|MT6755 SECURE BOOT FRP REMOVE Done::..
 
SUCCESSFULLY REMOVE FRP(OPPO F1S PLUS A1601EX MT6750|MT6755)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Reset Settings/Format FS [ v2.00 r1 ]
Quote:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllIn_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 90014A484247346132A41836740573FD
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 71FCD0B2E60D9F37CCEF56F74B57EA

DA : USB : FULL-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:13

Reconnect Power/Cable!
THANKS INFINITY-BOX TEAM

MDxavi 04-17-2018 10:38
OPPO F1S Identify

Code:
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Identify [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM57)
MODE : BOOTROM
PORT : 57
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
    CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
    TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
    BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
    DA : AGENT started!
DA : SYNC
    DA : MODE : BROM
DA : EXT_RAM NOT initialized!
    EMI : DEV : INFINITY
    EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
    EMI : CNT : 0009
    EMI : Init EMI from INTERNAL DB
    EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0x100000000 [ 4,00 GB ]

        EMMC: 150100525831344D42079BFDD819A3E1
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX14MB
        EMMC:
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB  : 0x00400000 [ 4,00 MB ]
              USER  : 0x747C00000 [ 29,12 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : D0AD212FE8657637A37A68A47C429C1F

DA : USB : FULL-SPEED

Boot done!

Product Model  : A1601
Product Brand  : OPPO
Product Name  : A1601
Product Device : A1601
Product Board  : full_oppo6750_15331
Product Info  : oppo6750_15331
SW Version    : A.28
SW OTA Version : A1601EX_11.A.28_INT_028_201702102025
SW OTA Name    : A1601EX_11_A.28_170210
Display ID    : A1601EX_11_A.28_170210
Kernel Info    : 3.10.72-G201702102025
Product Model  : A1601
Product Brand  : OPPO
Product Name  : A1601
Product Device : A1601
Product Board  : full_oppo6750_15331
Product Info  : oppo6750_15331
SW Version    : A.28
SW OTA Version : A1601EX_11.A.28_INT_028_201702102025
SW OTA Name    : A1601EX_11_A.28_170210
Display ID    : A1601EX_11_A.28_170210
Kernel Info    : 3.10.72-G201702102025
Patch Level    : LMY47I
Ver. CodeName  : REL
Ver. Release  : 5.1
Sec. Patch    : 2017-02-05
Build Time    : 1486731883
Product Manfct : OPPO
Board Platform : mt6750
Product Model  : A1601
Product Brand  : OPPO
Product Name  : A1601
Product Device : A1601
Product Board  : full_oppo6750_15331
Product Info  : oppo6750_15331
SW Version    : A.28
SW OTA Version : A1601EX_11.A.28_INT_028_201702102025
SW OTA Name    : A1601EX_11_A.28_170210
Display ID    : A1601EX_11_A.28_170210
Kernel Info    : 3.10.72-G201702102025

IMEI[0] : 86810-------------
IMEI[1] : 86810-------------
NVRAM check : Passed!

Done!
Elapsed: 00:00:14

RESET FRP DONE

Code:
Operation : Reset Settings/Format FS [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM57)
MODE : BOOTROM
PORT : 57
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
    CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
    TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
    BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
    DA : AGENT started!
DA : SYNC
    DA : MODE : BROM
DA : EXT_RAM NOT initialized!
    EMI : DEV : INFINITY
    EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
    EMI : CNT : 0009
    EMI : Init EMI from INTERNAL DB
    EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0x100000000 [ 4,00 GB ]

        EMMC: 150100525831344D42079BFDD819A3E1
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX14MB
        EMMC:
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB  : 0x00400000 [ 4,00 MB ]
              USER  : 0x747C00000 [ 29,12 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : D0AD212FE8657637A37A68A47C429C1F

DA : USB : FULL-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:14

Reconnect Power/Cable!

ORITECH 04-17-2018 10:52
please share nvdata oppo f5, thx

MDxavi 04-17-2018 11:22
OPPO F1 Plus (X9009)

Operation : Identify

Code:
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Identify [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM57)
MODE : BOOTROM
PORT : 57
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
    CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
    TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
    BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
    DA : AGENT started!
DA : SYNC
    DA : MODE : BROM
DA : EXT_RAM NOT initialized!
    EMI : DEV : INFINITY
    EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
    EMI : CNT : 0009
    EMI : Init EMI from INTERNAL DB
    EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0x100000000 [ 4,00 GB ]

        EMMC: 150100524331344D42074787D04D7301
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RC14MB
        EMMC:
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB  : 0x00400000 [ 4,00 MB ]
              USER  : 0xE8F800000 [ 58,24 GB ]

        CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 19D9D2E45DF1530BDD9FDA7B28933CBB

DA : USB : FULL-SPEED

Boot done!

Patch Level    : MRA58K
Ver. CodeName  : REL
Ver. Release  : 6.0
Sec. Patch    : 2017-03-05
Build Time    : 1490695626
Product Manfct : OPPO
Board Platform : mt6755
Product Model  : X9009
Product Brand  : OPPO
Product Name  : X9009
Product Device : X9009
Product Board  : full_oppo6755_15311
Product Info  : oppo6755_15311
SW Version    : D.01
SW OTA Version : X9009EX_11.D.01_INT_001_201703281711
SW OTA Name    : X9009EX_11_D.01_170328
Display ID    : X9009EX_11_D.01_170328
Kernel Info    : 3.18.22-G201703281711

IMEI[0] : 35344--------------
IMEI[1] : 35344--------------
NVRAM check : Passed!

Done!
Elapsed: 00:00:15

Operation : Read Firmware

Code:
Operation : Read Firmware [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM57)
MODE : BOOTROM
PORT : 57
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
    CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
    TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
    BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
    DA : AGENT started!
DA : SYNC
    DA : MODE : BROM
DA : EXT_RAM NOT initialized!
    EMI : DEV : INFINITY
    EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
    EMI : CNT : 0009
    EMI : Init EMI from INTERNAL DB
    EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0x100000000 [ 4,00 GB ]

        EMMC: 150100524331344D42074787D04D7301
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RC14MB
        EMMC:
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB  : 0x00400000 [ 4,00 MB ]
              USER  : 0xE8F800000 [ 58,24 GB ]

        CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 19D9D2E45DF1530BDD9FDA7B28933CBB

DA : USB : FULL-SPEED

Boot done!

Patch Level    : MRA58K
Ver. CodeName  : REL
Ver. Release  : 6.0
Sec. Patch    : 2017-03-05
Build Time    : 1490695626
Product Manfct : OPPO
Board Platform : mt6755
Product Model  : X9009
Product Brand  : OPPO
Product Name  : X9009
Product Device : X9009
Product Board  : full_oppo6755_15311
Product Info  : oppo6755_15311
SW Version    : D.01
SW OTA Version : X9009EX_11.D.01_INT_001_201703281711
SW OTA Name    : X9009EX_11_D.01_170328
Display ID    : X9009EX_11_D.01_170328
Kernel Info    : 3.18.22-G201703281711

MT6755__OPPO__X9009__6.0__X9009EX_11_D.01_170328__MRA58K__oppo6755_15311

Read : preloader.bin
Read : recovery.img
Read : oppo_custom.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : md1arm7.img
Read : md3rom.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 9%
Read : cache.img
Read : userdata.img

Android Info saved : _Android_info.txt
Scatter  : MT6755_Android_scatter.txt
Saved to : C:\Users\CM2_GSM\Desktop\MT6755__OPPO__X9009__6.0__X9009EX_11_D.01_170328__MRA58K__oppo6755_15311\

Done!
Elapsed: 00:05:06


All times are GMT +1. The time now is 09:13.
Page 1 of 12 1 23411 Last »
Show 50 post(s) from this thread on one page


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.33561 seconds with 7 queries

SEO by vBSEO