GSM-Forum - ..::CM2MT2 SECURE BOOT SUCCESS REPORT STARTs::..

Page 1 of 4

Show 50 post(s) from this thread on one page

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)

- - ..::CM2MT2 SECURE BOOT SUCCESS REPORT STARTs::.. (https://forum.gsmhosting.com/vbb/f296/cm2mt2-secure-boot-success-report-starts-2384253/)

gracy_elec

04-16-2018 14:32

..::CM2MT2 SECURE BOOT SUCCESS REPORT STARTs::..

SUCCESSFULLY READ INFO (OPPO F5 CPH1723EX MT6763)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Identify [ v2.00 r1 ]

Quote:

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6763
EMI : SRC : preloader_oppo6763_17031.bin
EMI : CNT : 000F
EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [0 B ]
EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG | DEV : DH6DMB : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG | DEV : 3H6CMB : RAM : [ 6.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG | DEV : GE6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG | DEV : RD64MB : RAM : [ 4.00 GB ]
EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : UNKNOWN | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100525836344D4203E046DA2B84D5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : EE09697D43DC32B25D65CFBCA266D28E

DA : USB : HIGH-SPEED

Boot done!

Patch Level : N6F26Q
Ver. CodeName : REL
Ver. Release : 7.1.1
Sec. Patch : 2017-10-05
Build Time : 1508524623
Product Manfct : OPPO
Board Platform : mt6763
Product Model : OPPO CPH1723
Product Brand : OPPO
Product Name : CPH1723
Product Device : M6763A
Product Board : full_oppo6763_17031
Product Info : oppo6763_17031
SW Version : A.02
SW OTA Version : M6763A_11.A.02_0020_201710210033
SW OTA Name : CPH1723EX_11_A.02_171021
Display ID : CPH1723EX_11_A.02_171021
Kernel Info : 4.4.22-G201710210033

NVRAM check : Passed!

Done!
Elapsed: 00:00:27

THANKS INFINITY-BOX TEAM

gracy_elec

04-16-2018 14:45

..::OPPO F5 CPH1723EX MT6763 SECURE BOOT READ FIRMWARE Done::..

SUCCESSFULLY READ FIRMWARE(OPPO F5 CPH1723EX MT6763)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Read Firmware [ v2.00 r1 ]

Quote:

THANKS INFINITY-BOX TEAM

gracy_elec

04-16-2018 14:52

..::OPPO F5 CPH1723EX MT6763 SECURE BOOT READ NVRAM Done::..

SUCCESSFULLY READ NVRAM(OPPO F5 CPH1723EX MT6763)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Read Security [ v2.00 r1 ]

Quote:

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6763
EMI : SRC : preloader_oppo6763_17031.bin
EMI : CNT : 000F
EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [0 B ]
EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG | DEV : DH6DMB : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG | DEV : 3H6CMB : RAM : [ 6.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG | DEV : GE6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG | DEV : RD64MB : RAM : [ 4.00 GB ]
EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : UNKNOWN | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100525836344D4203E046DA2B84D5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : EE09697D43DC32B25D65CFBCA266D28E

DA : USB : HIGH-SPEED

Boot done!

NVRAM check : Passed!

NVM saved as : MT6763__eMMC__.mt_sec
NVM saved to : G:\OPPO BACKUP\

Done!
Elapsed: 00:00:27

Reconnect Power/Cable!

THANKS INFINITY-BOX TEAM

gracy_elec

04-16-2018 15:15

..::OPPO F5 CPH1723EX MT6763 SECURE BOOT Memory Tool Init DONE::..

SUCCESSFULLY CONNECT MEMORYTOOL[eMMC](OPPO F5 CPH1723EX MT6763)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Memory Tool Init [ v2.00 r1 ]

Quote:

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6763
EMI : SRC : preloader_oppo6763_17031.bin
EMI : CNT : 000F
EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [0 B ]
EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG | DEV : DH6DMB : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG | DEV : 3H6CMB : RAM : [ 6.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG | DEV : GE6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG | DEV : RD64MB : RAM : [ 4.00 GB ]
EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : UNKNOWN | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100525836344D4203E046DA2B84D5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : EE09697D43DC32B25D65CFBCA266D28E

DA : USB : HIGH-SPEED

Boot done!

Set default path : C:\InfinityBox\CM2MT2\phdata\

Ready!

https://s26.postimg.cc/m2unguwp5/Untitled.jpg

THANKS INFINITY-BOX TEAM

shailccna

04-16-2018 15:24

now post a screen shot with flash this set with reded firmware. wating for screen shot

mabo13

04-16-2018 15:30

please direct link of InfinityBox_install_CM2MT2_v2.00.7z

TALHAGSM

04-16-2018 15:36

Quote:

Originally Posted by mabo13 (Post 13081889)

please direct link of InfinityBox_install_CM2MT2_v2.00.7z

link is here.

https://drive.google.com/file/d/12gQ...flLsjcuSV/view

gracy_elec

04-17-2018 09:29

..::OPPO F1 PLUS A1601EX MT6750|MT6755 SECURE BOOT READ INFO Done::..

SUCCESSFULLY READ INFO (OPPO F1S PLUS A1601EX MT6750)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Identify [ v2.00 r1 ]

Quote:

THANKS INFINITY-BOX TEAM

gracy_elec

04-17-2018 09:39

.::OPPO F1 PLUS A1601EX MT6750|MT6755 SECURE BOOT READ FIRMWARE Done::..

SUCCESSFULLY READ FIRMWARE(OPPO F1S PLUS A1601EX MT6750|MT6755)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Read Firmware [ v2.00 r1 ]

Quote:

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInTwo_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 90014A484247346132A41836740573FD
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 71FCD0B2E60D9F37CCEF56F74B57EA

DA : USB : FULL-SPEED

Boot done!

Product Model : A1601
Product Brand : OPPO
Product Name : A1601
Product Device : A1601
Product Board : full_oppo6750_15331
Product Info : oppo6750_15331
SW Version : A.32
SW OTA Version : A1601EX_11.A.32_INT_032_201707211426
SW OTA Name : A1601EX_11_A.32_170721
Display ID : A1601EX_11_A.32_170721
Kernel Info : 3.10.72-G201707211426
Product Model : A1601
Product Brand : OPPO
Product Name : A1601
Product Device : A1601
Product Board : full_oppo6750_15331
Product Info : oppo6750_15331
SW Version : A.32
SW OTA Version : A1601EX_11.A.32_INT_032_201707211426
SW OTA Name : A1601EX_11_A.32_170721
Display ID : A1601EX_11_A.32_170721
Kernel Info : 3.10.72-G201707211426
Patch Level : LMY47I
Ver. CodeName : REL
Ver. Release : 5.1
Sec. Patch : 2017-05-05
Build Time : 1500621229
Product Manfct : OPPO
Board Platform : mt6750
Product Model : A1601
Product Brand : OPPO
Product Name : A1601
Product Device : A1601
Product Board : full_oppo6750_15331
Product Info : oppo6750_15331
SW Version : A.32
SW OTA Version : A1601EX_11.A.32_INT_032_201707211426
SW OTA Name : A1601EX_11_A.32_170721
Display ID : A1601EX_11_A.32_170721
Kernel Info : 3.10.72-G201707211426

MT6750__OPPO__A1601__5.1__A1601EX_11_A.32_170721__ LMY47I__oppo6750_15331

Read : preloader.bin
Read : recovery.img
Read : oppo_custom.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : md1arm7.img
Read : md3rom.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 3%
Read : cache.img
Read : userdata.img

Android Info saved : _Android_info.txt
Scatter : MT6750_Android_scatter.txt
Saved to : G:\OPPO BACKUP\MT6750__OPPO__A1601__5.1__A1601EX_11_A.32_1 70721__LMY47I__oppo6750_15331\

Done!
Elapsed: 00:05:23

THANKS INFINITY-BOX TEAM

Aamir8794

04-17-2018 09:43

can i repair IMEI oppo f5??

gracy_elec

04-17-2018 09:46

.::OPPO F1 PLUS A1601EX MT6750|MT6755 SECURE BOOT READ NVRAM Done::..

SUCCESSFULLY READ NVRAM(OPPO F1S PLUS A1601EX MT6750|MT6755)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Read Security [ v2.00 r1 ]

Quote:

THANKS INFINITY-BOX TEAM

gracy_elec

04-17-2018 09:54

.::OPPO F1 PLUS A1601EX MT6750|MT6755 SECURE BOOT FRP REMOVE Done::..

SUCCESSFULLY REMOVE FRP(OPPO F1S PLUS A1601EX MT6750|MT6755)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Reset Settings/Format FS [ v2.00 r1 ]

Quote:

THANKS INFINITY-BOX TEAM

MDxavi

04-17-2018 10:38

OPPO F1S Identify

Code:

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1
 

Operation : Identify [ v2.00 r1 ]
 

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after

2. Insert USB cable in phone

Waiting for device connection ...
 

PTFN : MediaTek USB Port (COM57)

MODE : BOOTROM

PORT : 57

Waiting BOOT ack ...

BROM : Skip ACK verify

BROM : Init BROM

BROM init passed!

     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001

     TYPE : MODERN RAPHAEL

BROM : SecLevel : 0x00000000

BROM : SecMode  : PLAIN [+PRL]

BROM : BOOTROM

AGENT : Look for suitable BootChain in DA ... 

AGENT : MTK_AllInOne_DA.bin

AGENT : Found MT6755

AGENT : MTK_DOWNLOAD_AGENT

     BROM : Sending 1st DA ...

BROM : DA sent

BROM :Transfer control to DA ... 

     DA : AGENT started!

DA : SYNC

     DA : MODE : BROM

DA : EXT_RAM NOT initialized!

     EMI : DEV : INFINITY

     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0

     EMI : CNT : 0009

     EMI : Init EMI from INTERNAL DB

     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...

DA : 2ND stage confirmed!

DA : SYNC with DA passed!

DA : Receiving HW info
 

        SRAM: 0x00040000 [ 256,00 KB ]

        DRAM: 0x100000000 [ 4,00 GB ]
 

        EMMC: 150100525831344D42079BFDD819A3E1

        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX14MB

        EMMC: 

              BOOT1  : 0x00400000 [ 4,00 MB ]

              BOOT2  : 0x00400000 [ 4,00 MB ]

              RPMB   : 0x00400000 [ 4,00 MB ]

              USER   : 0x747C00000 [ 29,12 GB ]
 

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
 

        RNID : D0AD212FE8657637A37A68A47C429C1F
 

DA : USB : FULL-SPEED
 

Boot done!
 

Product Model  : A1601

Product Brand  : OPPO

Product Name   : A1601

Product Device : A1601

Product Board  : full_oppo6750_15331

Product Info   : oppo6750_15331

SW Version     : A.28

SW OTA Version : A1601EX_11.A.28_INT_028_201702102025

SW OTA Name    : A1601EX_11_A.28_170210

Display ID     : A1601EX_11_A.28_170210

Kernel Info    : 3.10.72-G201702102025

Product Model  : A1601

Product Brand  : OPPO

Product Name   : A1601

Product Device : A1601

Product Board  : full_oppo6750_15331

Product Info   : oppo6750_15331

SW Version     : A.28

SW OTA Version : A1601EX_11.A.28_INT_028_201702102025

SW OTA Name    : A1601EX_11_A.28_170210

Display ID     : A1601EX_11_A.28_170210

Kernel Info    : 3.10.72-G201702102025

Patch Level    : LMY47I

Ver. CodeName  : REL

Ver. Release   : 5.1

Sec. Patch     : 2017-02-05

Build Time     : 1486731883

Product Manfct : OPPO

Board Platform : mt6750

Product Model  : A1601

Product Brand  : OPPO

Product Name   : A1601

Product Device : A1601

Product Board  : full_oppo6750_15331

Product Info   : oppo6750_15331

SW Version     : A.28

SW OTA Version : A1601EX_11.A.28_INT_028_201702102025

SW OTA Name    : A1601EX_11_A.28_170210

Display ID     : A1601EX_11_A.28_170210

Kernel Info    : 3.10.72-G201702102025
 

IMEI[0] : 86810-------------

IMEI[1] : 86810-------------

NVRAM check : Passed!
 

Done!

Elapsed: 00:00:14

RESET FRP DONE

Code:

Operation : Reset Settings/Format FS [ v2.00 r1 ]
 

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after

2. Insert USB cable in phone

Waiting for device connection ...
 

PTFN : MediaTek USB Port (COM57)

MODE : BOOTROM

PORT : 57

Waiting BOOT ack ...

BROM : Skip ACK verify

BROM : Init BROM

BROM init passed!

     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001

     TYPE : MODERN RAPHAEL

BROM : SecLevel : 0x00000000

BROM : SecMode  : PLAIN [+PRL]

BROM : BOOTROM

AGENT : Look for suitable BootChain in DA ... 

AGENT : MTK_AllInOne_DA.bin

AGENT : Found MT6755

AGENT : MTK_DOWNLOAD_AGENT

     BROM : Sending 1st DA ...

BROM : DA sent

BROM :Transfer control to DA ... 

     DA : AGENT started!

DA : SYNC

     DA : MODE : BROM

DA : EXT_RAM NOT initialized!

     EMI : DEV : INFINITY

     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0

     EMI : CNT : 0009

     EMI : Init EMI from INTERNAL DB

     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...

DA : 2ND stage confirmed!

DA : SYNC with DA passed!

DA : Receiving HW info
 

        SRAM: 0x00040000 [ 256,00 KB ]

        DRAM: 0x100000000 [ 4,00 GB ]
 

        EMMC: 150100525831344D42079BFDD819A3E1

        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX14MB

        EMMC: 

              BOOT1  : 0x00400000 [ 4,00 MB ]

              BOOT2  : 0x00400000 [ 4,00 MB ]

              RPMB   : 0x00400000 [ 4,00 MB ]

              USER   : 0x747C00000 [ 29,12 GB ]
 

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
 

        RNID : D0AD212FE8657637A37A68A47C429C1F
 

DA : USB : FULL-SPEED
 

Boot done!
 

Format Ok : RESET PROTECTION
 

Done!

Elapsed: 00:00:14
 

Reconnect Power/Cable!

ORITECH

04-17-2018 10:52

please share nvdata oppo f5, thx

MDxavi

04-17-2018 11:22

OPPO F1 Plus (X9009)

Operation : Identify

Code:

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1
 

Operation : Identify [ v2.00 r1 ]
 

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after

2. Insert USB cable in phone

Waiting for device connection ...
 

PTFN : MediaTek USB Port (COM57)

MODE : BOOTROM

PORT : 57

Waiting BOOT ack ...

BROM : Skip ACK verify

BROM : Init BROM

BROM init passed!

     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001

     TYPE : MODERN RAPHAEL

BROM : SecLevel : 0x00000001

BROM : SecMode  : SBC

BROM : BOOTROM

AGENT : Look for suitable BootChain in DA ... 

AGENT : MTK_AllInOne_DA.bin

AGENT : Found MT6755

AGENT : MTK_DOWNLOAD_AGENT

     BROM : Sending 1st DA ...

BROM : DA sent

BROM :Transfer control to DA ... 

     DA : AGENT started!

DA : SYNC

     DA : MODE : BROM

DA : EXT_RAM NOT initialized!

     EMI : DEV : INFINITY

     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0

     EMI : CNT : 0009

     EMI : Init EMI from INTERNAL DB

     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...

DA : 2ND stage confirmed!

DA : SYNC with DA passed!

DA : Receiving HW info
 

        SRAM: 0x00040000 [ 256,00 KB ]

        DRAM: 0x100000000 [ 4,00 GB ]
 

        EMMC: 150100524331344D42074787D04D7301

        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RC14MB

        EMMC: 

              BOOT1  : 0x00400000 [ 4,00 MB ]

              BOOT2  : 0x00400000 [ 4,00 MB ]

              RPMB   : 0x00400000 [ 4,00 MB ]

              USER   : 0xE8F800000 [ 58,24 GB ]
 

        CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
 

        RNID : 19D9D2E45DF1530BDD9FDA7B28933CBB
 

DA : USB : FULL-SPEED
 

Boot done!
 

Patch Level    : MRA58K

Ver. CodeName  : REL

Ver. Release   : 6.0

Sec. Patch     : 2017-03-05

Build Time     : 1490695626

Product Manfct : OPPO

Board Platform : mt6755

Product Model  : X9009

Product Brand  : OPPO

Product Name   : X9009

Product Device : X9009

Product Board  : full_oppo6755_15311

Product Info   : oppo6755_15311

SW Version     : D.01

SW OTA Version : X9009EX_11.D.01_INT_001_201703281711

SW OTA Name    : X9009EX_11_D.01_170328

Display ID     : X9009EX_11_D.01_170328

Kernel Info    : 3.18.22-G201703281711
 

IMEI[0] : 35344--------------

IMEI[1] : 35344--------------

NVRAM check : Passed!
 

Done!

Elapsed: 00:00:15

Operation : Read Firmware

Code:

Operation : Read Firmware [ v2.00 r1 ]
 

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after

2. Insert USB cable in phone

Waiting for device connection ...
 

PTFN : MediaTek USB Port (COM57)

MODE : BOOTROM

PORT : 57

Waiting BOOT ack ...

BROM : Skip ACK verify

BROM : Init BROM

BROM init passed!

     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001

     TYPE : MODERN RAPHAEL

BROM : SecLevel : 0x00000001

BROM : SecMode  : SBC

BROM : BOOTROM

AGENT : Look for suitable BootChain in DA ... 

AGENT : MTK_AllInOne_DA.bin

AGENT : Found MT6755

AGENT : MTK_DOWNLOAD_AGENT

     BROM : Sending 1st DA ...

BROM : DA sent

BROM :Transfer control to DA ... 

     DA : AGENT started!

DA : SYNC

     DA : MODE : BROM

DA : EXT_RAM NOT initialized!

     EMI : DEV : INFINITY

     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0

     EMI : CNT : 0009

     EMI : Init EMI from INTERNAL DB

     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...

DA : 2ND stage confirmed!

DA : SYNC with DA passed!

DA : Receiving HW info
 

        SRAM: 0x00040000 [ 256,00 KB ]

        DRAM: 0x100000000 [ 4,00 GB ]
 

        EMMC: 150100524331344D42074787D04D7301

        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RC14MB

        EMMC: 

              BOOT1  : 0x00400000 [ 4,00 MB ]

              BOOT2  : 0x00400000 [ 4,00 MB ]

              RPMB   : 0x00400000 [ 4,00 MB ]

              USER   : 0xE8F800000 [ 58,24 GB ]
 

        CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
 

        RNID : 19D9D2E45DF1530BDD9FDA7B28933CBB
 

DA : USB : FULL-SPEED
 

Boot done!
 

Patch Level    : MRA58K

Ver. CodeName  : REL

Ver. Release   : 6.0

Sec. Patch     : 2017-03-05

Build Time     : 1490695626

Product Manfct : OPPO

Board Platform : mt6755

Product Model  : X9009

Product Brand  : OPPO

Product Name   : X9009

Product Device : X9009

Product Board  : full_oppo6755_15311

Product Info   : oppo6755_15311

SW Version     : D.01

SW OTA Version : X9009EX_11.D.01_INT_001_201703281711

SW OTA Name    : X9009EX_11_D.01_170328

Display ID     : X9009EX_11_D.01_170328

Kernel Info    : 3.18.22-G201703281711
 

MT6755__OPPO__X9009__6.0__X9009EX_11_D.01_170328__MRA58K__oppo6755_15311
 

Read : preloader.bin

Read : recovery.img

Read : oppo_custom.img

Read : proinfo.img

Read : md1rom.img

Read : md1dsp.img

Read : md1arm7.img

Read : md3rom.img

Read : nvram.bin

Read : lk.bin

Read : boot.img

Read : logo.bin

Read : tz.img

Read : secro.img

Read : system.img

ExtSparse : Compression ratio : 9%

Read : cache.img

Read : userdata.img
 

Android Info saved : _Android_info.txt

Scatter  : MT6755_Android_scatter.txt

Saved to : C:\Users\CM2_GSM\Desktop\MT6755__OPPO__X9009__6.0__X9009EX_11_D.01_170328__MRA58K__oppo6755_15311\
 

Done!

Elapsed: 00:05:06

GSM Deals

04-17-2018 13:06

Quote:

Originally Posted by gracy_elec (Post 13081679)

SUCCESSFULLY READ INFO (OPPO F5 CPH1723EX MT6763)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Identify [ v2.00 r1 ]

THANKS INFINITY-BOX TEAM

hi can you please read nvram from phone and share it

rebainoor

04-17-2018 13:26

Oppo f1s oppo f1s a1601 mt6755

read info success :

Code:

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1
 

Operation : Identify [ v2.00 r1 ]
 

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after

2. Insert USB cable in phone

Waiting for device connection ...
 

PTFN : MTK USB Port (COM13)

MODE : BOOTROM

PORT : 13

Waiting BOOT ack ...

BROM : Skip ACK verify

BROM : Init BROM

BROM init passed!

     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001

     TYPE : MODERN RAPHAEL

BROM : SecLevel : 0x00000001

BROM : SecMode  : SBC

BROM : BOOTROM

AGENT : Look for suitable BootChain in DA ... 

AGENT : MTK_AllInOne_DA.bin

AGENT : Found MT6755

AGENT : MTK_DOWNLOAD_AGENT

     BROM : Sending 1st DA ...

BROM : DA sent

BROM :Transfer control to DA ... 

     DA : AGENT started!

DA : SYNC

     DA : MODE : BROM

DA : EXT_RAM NOT initialized!

     EMI : DEV : INFINITY

     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0

     EMI : CNT : 0009

     EMI : Init EMI from INTERNAL DB

     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...

DA : 2ND stage confirmed!

DA : SYNC with DA passed!

DA : Receiving HW info
 

        SRAM: 0x00040000 [ 256,00 KB ]

        DRAM: 0xC0000000 [ 3,00 GB ]
 

        EMMC: 150100525831424D420747A3E08393E7

        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX1BMB

        EMMC: 

              BOOT1  : 0x00400000 [ 4,00 MB ]

              BOOT2  : 0x00400000 [ 4,00 MB ]

              RPMB   : 0x00400000 [ 4,00 MB ]

              USER   : 0x747C00000 [ 29,12 GB ]
 

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
 

        RNID : C007F322F06E70A4DF22C5B24A8062B5
 

DA : USB : FULL-SPEED
 

Boot done!
 

Product Model  : A1601

Product Brand  : OPPO

Product Name   : A1601

Product Device : A1601

Product Board  : full_oppo6750_15331

Product Info   : oppo6750_15331

SW Version     : A.33

SW OTA Version : A1601EX_11.A.33_INT_033_201708142235

SW OTA Name    : A1601EX_11_A.33_170814

Display ID     : A1601EX_11_A.33_170814

Kernel Info    : 3.10.72-G201708142235

Product Model  : A1601

Product Brand  : OPPO

Product Name   : A1601

Product Device : A1601

Product Board  : full_oppo6750_15331

Product Info   : oppo6750_15331

SW Version     : A.33

SW OTA Version : A1601EX_11.A.33_INT_033_201708142235

SW OTA Name    : A1601EX_11_A.33_170814

Display ID     : A1601EX_11_A.33_170814

Kernel Info    : 3.10.72-G201708142235

Patch Level    : LMY47I

Ver. CodeName  : REL

Ver. Release   : 5.1

Sec. Patch     : 2017-08-05

Build Time     : 1502723862

Product Manfct : OPPO

Board Platform : mt6750

Product Model  : A1601

Product Brand  : OPPO

Product Name   : A1601

Product Device : A1601

Product Board  : full_oppo6750_15331

Product Info   : oppo6750_15331

SW Version     : A.33

SW OTA Version : A1601EX_11.A.33_INT_033_201708142235

SW OTA Name    : A1601EX_11_A.33_170814

Display ID     : A1601EX_11_A.33_170814

Kernel Info    : 3.10.72-G201708142235
 

IMEI[0] : 863632xxxxxxxxx

IMEI[1] : 863632xxxxxxxxx

NVRAM check : Passed!
 

Done!

Elapsed: 00:00:21

FORCED USER FORMAT SUCCESS

Code:

Operation : Reset Settings/Format FS [ v2.00 r1 ]
 

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after

2. Insert USB cable in phone

Waiting for device connection ...
 

PTFN : MTK USB Port (COM13)

MODE : BOOTROM

PORT : 13

Waiting BOOT ack ...

BROM : Skip ACK verify

BROM : Init BROM

BROM init passed!

     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001

     TYPE : MODERN RAPHAEL

BROM : SecLevel : 0x00000001

BROM : SecMode  : SBC

BROM : BOOTROM

AGENT : Look for suitable BootChain in DA ... 

AGENT : MTK_AllInOne_DA.bin

AGENT : Found MT6755

AGENT : MTK_DOWNLOAD_AGENT

     BROM : Sending 1st DA ...

BROM : DA sent

BROM :Transfer control to DA ... 

     DA : AGENT started!

DA : SYNC

     DA : MODE : BROM

DA : EXT_RAM NOT initialized!

     EMI : DEV : INFINITY

     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0

     EMI : CNT : 0009

     EMI : Init EMI from INTERNAL DB

     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...

DA : 2ND stage confirmed!

DA : SYNC with DA passed!

DA : Receiving HW info
 

        SRAM: 0x00040000 [ 256,00 KB ]

        DRAM: 0xC0000000 [ 3,00 GB ]
 

        EMMC: 150100525831424D420747A3E08393E7

        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX1BMB

        EMMC: 

              BOOT1  : 0x00400000 [ 4,00 MB ]

              BOOT2  : 0x00400000 [ 4,00 MB ]

              RPMB   : 0x00400000 [ 4,00 MB ]

              USER   : 0x747C00000 [ 29,12 GB ]
 

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
 

        RNID : C007F322F06E70A4DF22C5B24A8062B5
 

DA : USB : FULL-SPEED
 

Boot done!
 
 Format Ok : USERDATA

Format Ok : CACHE
 

Done!

Elapsed: 00:00:23

READ SECURITY SUCCESS :

Code:

Operation : Read Security [ v2.00 r1 ]
 

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after

2. Insert USB cable in phone

Waiting for device connection ...
 

PTFN : MTK USB Port (COM13)

MODE : BOOTROM

PORT : 13

Waiting BOOT ack ...

BROM : Skip ACK verify

BROM : Init BROM

BROM init passed!

     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001

     TYPE : MODERN RAPHAEL

BROM : SecLevel : 0x00000001

BROM : SecMode  : SBC

BROM : BOOTROM

AGENT : Look for suitable BootChain in DA ... 

AGENT : MTK_AllInOne_DA.bin

AGENT : Found MT6755

AGENT : MTK_DOWNLOAD_AGENT

     BROM : Sending 1st DA ...

BROM : DA sent

BROM :Transfer control to DA ... 

     DA : AGENT started!

DA : SYNC

     DA : MODE : BROM

DA : EXT_RAM NOT initialized!

     EMI : DEV : INFINITY

     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0

     EMI : CNT : 0009

     EMI : Init EMI from INTERNAL DB

     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...

DA : 2ND stage confirmed!

DA : SYNC with DA passed!

DA : Receiving HW info
 

        SRAM: 0x00040000 [ 256,00 KB ]

        DRAM: 0xC0000000 [ 3,00 GB ]
 

        EMMC: 150100525831424D420747A3E08393E7

        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX1BMB

        EMMC: 

              BOOT1  : 0x00400000 [ 4,00 MB ]

              BOOT2  : 0x00400000 [ 4,00 MB ]

              RPMB   : 0x00400000 [ 4,00 MB ]

              USER   : 0x747C00000 [ 29,12 GB ]
 

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
 

        RNID : C007F322F06E70A4DF22C5B24A8062B5
 

DA : USB : FULL-SPEED
 

Boot done!
 

SEC Data : 

IMEI[0] : 8636320xxxxxxxx

IMEI[1] : 8636320xxxxxxxx
 
 NVRAM check : Passed!
 

NVM saved as : MT6755__eMMC__863632036641872.mt_sec

NVM saved to : D:\
 

Done!

Elapsed: 00:00:16

read firmware success done :

Code:

Operation : Read Firmware [ v2.00 r1 ]
 

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after

2. Insert USB cable in phone

Waiting for device connection ...
 

PTFN : MTK USB Port (COM13)

MODE : BOOTROM

PORT : 13

Waiting BOOT ack ...

BROM : Skip ACK verify

BROM : Init BROM

BROM init passed!

     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001

     TYPE : MODERN RAPHAEL

BROM : SecLevel : 0x00000001

BROM : SecMode  : SBC

BROM : BOOTROM

AGENT : Look for suitable BootChain in DA ... 

AGENT : MTK_AllInOne_DA.bin

AGENT : Found MT6755

AGENT : MTK_DOWNLOAD_AGENT

     BROM : Sending 1st DA ...

BROM : DA sent

BROM :Transfer control to DA ... 

     DA : AGENT started!

DA : SYNC

     DA : MODE : BROM

DA : EXT_RAM NOT initialized!

     EMI : DEV : INFINITY

     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0

     EMI : CNT : 0009

     EMI : Init EMI from INTERNAL DB

     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...

DA : 2ND stage confirmed!

DA : SYNC with DA passed!

DA : Receiving HW info
 

        SRAM: 0x00040000 [ 256,00 KB ]

        DRAM: 0xC0000000 [ 3,00 GB ]
 

        EMMC: 150100525831424D420747A3E08393E7

        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX1BMB

        EMMC: 

              BOOT1  : 0x00400000 [ 4,00 MB ]

              BOOT2  : 0x00400000 [ 4,00 MB ]

              RPMB   : 0x00400000 [ 4,00 MB ]

              USER   : 0x747C00000 [ 29,12 GB ]
 

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
 

        RNID : C007F322F06E70A4DF22C5B24A8062B5
 

DA : USB : FULL-SPEED
 

Boot done!
 

Product Model  : A1601

Product Brand  : OPPO

Product Name   : A1601

Product Device : A1601

Product Board  : full_oppo6750_15331

Product Info   : oppo6750_15331

SW Version     : A.33

SW OTA Version : A1601EX_11.A.33_INT_033_201708142235

SW OTA Name    : A1601EX_11_A.33_170814

Display ID     : A1601EX_11_A.33_170814

Kernel Info    : 3.10.72-G201708142235

Product Model  : A1601

Product Brand  : OPPO

Product Name   : A1601

Product Device : A1601

Product Board  : full_oppo6750_15331

Product Info   : oppo6750_15331

SW Version     : A.33

SW OTA Version : A1601EX_11.A.33_INT_033_201708142235

SW OTA Name    : A1601EX_11_A.33_170814

Display ID     : A1601EX_11_A.33_170814

Kernel Info    : 3.10.72-G201708142235

Patch Level    : LMY47I

Ver. CodeName  : REL

Ver. Release   : 5.1

Sec. Patch     : 2017-08-05

Build Time     : 1502723862

Product Manfct : OPPO

Board Platform : mt6750

Product Model  : A1601

Product Brand  : OPPO

Product Name   : A1601

Product Device : A1601

Product Board  : full_oppo6750_15331

Product Info   : oppo6750_15331

SW Version     : A.33

SW OTA Version : A1601EX_11.A.33_INT_033_201708142235

SW OTA Name    : A1601EX_11_A.33_170814

Display ID     : A1601EX_11_A.33_170814

Kernel Info    : 3.10.72-G201708142235
 

MT6750__OPPO__A1601__5.1__A1601EX_11_A.33_170814__LMY47I__oppo6750_15331
 

Read : preloader.bin

Read : recovery.img

Read : oppo_custom.img

Read : proinfo.img

Read : md1rom.img

Read : md1dsp.img

Read : md1arm7.img

Read : md3rom.img

Read : nvram.bin

Read : lk.bin

Read : boot.img

Read : logo.bin

Read : tz.img

Read : secro.img

Read : system.img

ExtSparse : Compression ratio : 3%

Read : cache.img

Read : userdata.img
 

Android Info saved : _Android_info.txt

Scatter  : MT6750_Android_scatter.txt

Saved to : F:\MT6750__OPPO__A1601__5.1__A1601EX_11_A.33_170814__LMY47I__oppo6750_15331\
 

Done!

Elapsed: 00:02:41

GSM Deals

04-17-2018 13:43

Operation : Write Security [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM197)
MODE : BOOTROM
PORT : 197
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6763
EMI : SRC : preloader_oppo6763_17031.bin
EMI : CNT : 000F
EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [0 B ]
EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG | DEV : DH6DMB : RAM : [ 4,00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4,00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4,00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG | DEV : 3H6CMB : RAM : [ 6,00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4,00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3,00 GB ]
EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3,00 GB ]
EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG | DEV : GE6BMB : RAM : [ 3,00 GB ]
EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG | DEV : RD64MB : RAM : [ 4,00 GB ]
EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : UNKNOWN | DEV : S0J9B7 : RAM : [ 3,00 GB ]
EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4,00 GB ]
EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4,00 GB ]
EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3,00 GB ]
EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6,00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256,00 KB ]
DRAM: 0xC0000000 [ 3,00 GB ]

EMMC: 150100525836344D420324AACCB98401
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX64MB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x747C00000 [ 29,12 GB ]

CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : FCC7056EEE06A58A7A8276A1D337E7AF

DA : USB : HIGH-SPEED

Boot done!

Restore NVRAM from : MT6763__eMMC__.mt_sec
ERR : 0xC002002A
ERR : SEC_IMG_TYPE_MISMATCH
ERR : 0x04000000|0x04000000

Error : Flashing failed!
Seems as some of MANDATORY section of FW is damaged! If device alive and work - send report!

Reconnect Power/Cable!

FAIL TO WRITE NVRAM TO OPPO F5 READED FROM A WORKING PHONE
REGARDS

Infinity-BEST

04-17-2018 14:44

@GSM Deals, seems as that partition is disabled for WRITE, if data not signed.
We will check that.

gracy_elec

04-17-2018 14:58

.::OPPO X9009 MT6755 SECURE BOOT READ INFO Done::..

SUCCESSFULLY READ INFO (OPPO X9009 MT6755)USB

Operation : Identify [ v2.00 r1 ]

Quote:

THANKS INFINITY-BOX TEAM

gracy_elec

04-17-2018 15:04

.::OPPO X9009 MT6755 SECURE BOOT READ FIRMWARE Done::..

SUCCESSFULLY READ FIRMWARE(OPPO X9009 MT6755)USB

Operation : Read Firmware [ v2.00 r1 ]

Quote:

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInThree_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: 150100524331344D4207265BD4D853CB
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RC14MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : B7AD49ED22B3E71AFF43AA78A37ED9E7

DA : USB : FULL-SPEED

Boot done!

Product Model : X9009
Product Brand : OPPO
Product Name : X9009
Product Device : X9009
Product Board : full_oppo6755_15311
Product Info : oppo6755_15311
SW Version : A.17
SW OTA Version : X9009EX_11.A.17_INT_017_201605290913
SW OTA Name : X9009EX_11_A.17_160529
Display ID : X9009EX_11_A.17_160529
Kernel Info : 3.10.72-G201605290913
Product Model : X9009
Product Brand : OPPO
Product Name : X9009
Product Device : X9009
Product Board : full_oppo6755_15311
Product Info : oppo6755_15311
SW Version : A.17
SW OTA Version : X9009EX_11.A.17_INT_017_201605290913
SW OTA Name : X9009EX_11_A.17_160529
Display ID : X9009EX_11_A.17_160529
Kernel Info : 3.10.72-G201605290913
Patch Level : LMY47I
Ver. CodeName : REL
Ver. Release : 5.1
Sec. Patch : 2016-01-01
Build Time : 1464486259
Product Manfct : OPPO
Board Platform : mt6755
Product Model : X9009
Product Brand : OPPO
Product Name : X9009
Product Device : X9009
Product Board : full_oppo6755_15311
Product Info : oppo6755_15311
SW Version : A.17
SW OTA Version : X9009EX_11.A.17_INT_017_201605290913
SW OTA Name : X9009EX_11_A.17_160529
Display ID : X9009EX_11_A.17_160529
Kernel Info : 3.10.72-G201605290913

MT6755__OPPO__X9009__5.1__X9009EX_11_A.17_160529__ LMY47I__oppo6755_15311

Read : preloader.bin
Read : recovery.img
Read : oppo_custom.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : md1arm7.img
Read : md3rom.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 14%
Read : cache.img
Read : userdata.img

Android Info saved : _Android_info.txt
Scatter : MT6755_Android_scatter.txt
Saved to : G:\OPPO BACKUP\MT6755__OPPO__X9009__5.1__X9009EX_11_A.17_1 60529__LMY47I__oppo6755_15311\

Done!
Elapsed: 00:04:47

THANKS INFINITY-BOX TEAM

merujeffrey

04-17-2018 15:06

TECNO PHANTOM 8.. read info success

Operation : Identify [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM152)
MODE : PRELOADER PORT
PORT : 152
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL.bin
AGENT : Found MT6757
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x180000000 [ 6.00 GB ]

EMMC: 150100334836434D42055102C449A4D3
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : 3H6CMB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 , EVOL : 0x0000

RNID : F0F157B179F6CB4DD0C5E91E3CC003A8

DA : USB : HIGH-SPEED

Boot done!

Patch Level : NRD90M
Display ID : AX8-H571B-N-180115V251
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2017-12-05
Build Time : 1515998723
Product Model : TECNO AX8
Product Brand : TECNO
Product Name : H571
Product Device : TECNO-AX8
Product Manfct : TECNO
Board Platform : mt6757
Product Info : rlk6757_66_n

IMEI[0] : 358642081206325
IMEI[1] : 358642081206333
NVRAM check : Passed!

Done!
Elapsed: 00:00:20

FRP NOT SUCCESSFUL

Operation : Reset Settings/Format FS [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM152)
MODE : PRELOADER PORT
PORT : 152
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL.bin
AGENT : Found MT6757
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x180000000 [ 6.00 GB ]

EMMC: 150100334836434D42055102C449A4D3
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : 3H6CMB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 , EVOL : 0x0000

RNID : F0F157B179F6CB4DD0C5E91E3CC003A8

DA : USB : HIGH-SPEED

Boot done!

ERR : 0xC002000C
ERR : SEC_WRITE_DATA_NOT_ALLOWED
ERR : 0x00000000|0x00000000

Error : Failed erase block!
Try select another format mode!

Reconnect Power/Cable!

PLEASE HELP

gracy_elec

04-17-2018 15:08

.::OPPO X9009 MT6755 SECURE BOOT READ NVRAM Done::..

SUCCESSFULLY READ NVRAM(OPPO X9009 MT6755)USB

Operation : Read Security [ v2.00 r1 ]

Quote:

THANKS INFINITY-BOX TEAM

gracy_elec

04-17-2018 15:13

.::OPPO X9009 MT6755 SECURE BOOT REMOVE FRP Done::..

SUCCESSFULLY REMOVE FRP(OPPO X9009 MT6755)USB

Operation : Reset Settings/Format FS [ v2.00 r1 ]

Quote:

THANKS INFINITY-BOX TEAM

ghanshyamsolank

04-17-2018 15:34

VIVO Y69

Operation : Identify [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : GADGETSDOCTOR.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6755
EMI : SRC : preloader_bbk6750_66_n.bin
EMI : CNT : 0003
EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX | DEV : HBG4a2 : RAM : [ 3.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00000000 [0 B ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 90014A484247346132A529898A26748F
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000

RNID : 50B7363921B5F4509EE853024C1EBC9B

DA : USB : FULL-SPEED

Boot done!

Patch Level : NRD90M
Display ID : NRD90M release-keys
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2017-11-05
Build Time : 1512527607
Product Model : vivo 1714
Product Brand : vivo
Product Name : 1714
Product Device : 1714
Product Board : mt6750
Product Manfct : vivo
Board Platform : mt6750
Product Info : bbk6750_66_n
Product Model : PD1705F_EX

IMEI[0] : 86557203718XXXX
IMEI[1] : 86557103027XXXX
IMEI[2] : 865407010000009
NVRAM check : Passed!

Done!
Elapsed: 00:00:20

rebainoor

04-17-2018 19:13

Quote:

Originally Posted by merujeffrey (Post 13084157)

try to select FORCED USER FPRMAT

Aamir8794

04-18-2018 07:51

Oppo F5 Pro CPH1727 Repair IMEI get error...anyone tell me how to solve it

Quote:

Card found : 2F1E1DAE , v0136
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Repair Security [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM113)
MODE : BOOTROM
PORT : 113
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6763
EMI : SRC : preloader_oppo6763_17031.bin
EMI : CNT : 000F
EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [0 B ]
EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG | DEV : DH6DMB : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG | DEV : 3H6CMB : RAM : [ 6.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG | DEV : GE6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG | DEV : RD64MB : RAM : [ 4.00 GB ]
EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : UNKNOWN | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100334836434D4205ABFFC857A437
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : 3H6CMB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 32333ADB1EA57C4E53392685E9B4DC8

DA : USB : HIGH-SPEED

Boot done!

NVRAM check : Passed!

NVRAM condition BAD! Impossible to continue!

Done!
Elapsed: 00:00:31

Reconnect Power/Cable!

gracy_elec

04-18-2018 07:59

Quote:

Originally Posted by Aamir8794 (Post 13085384)

Oppo F5 Pro CPH1727 Repair IMEI get error...anyone tell me how to solve it

HERE IS YOUR ANS http://forum.gsmhosting.com/vbb/13084120-post19.html

GOOD LUCK

gracy_elec

04-19-2018 14:55

..::HOW TO WORKOUT ON CM2MT2[r]::.

HERE IS HOW TO USE CM2MT2 CPU WITH DA FILE WORKING 100% UNABALE TO UPLOAD LOGS BECAUSE OF SOME REASON BUT WILL TRY TO SLOVE PROBLEM AND WILL GIVE YOU MAGIC TRICK COMMING SOON AND ALL DA FILE R IN INFINITY FOLDER WHICH FILE YOU NEED YOU WILL NEED TO MOVEs

Quote:

CHIP : MT6755
BROM : SecMode : PLAIN [+PRL]
BASE_v1812 DA TYPE : MTK_AllInOne_DA.bin

CHIP : MT6755
BROM : SecMode : SBC+SDA
BROM : SLA
BASE_v1812 DA TYPE : DA_PL_CRYPTO.bin/DA_PL_CRYPTO20.bin

CHIP : MT6755
BROM : SecMode : SBC
BASE_v1812 DA TYPE : DA_PL.bin/MTK_AllInOne_DA.bin

CHIP : MT6755
BBROM : SecMode : SBC+SLA+SDA
BASE_v1812 DA TYPE : DA_PL.bin

CHIP : MT6757
BROM : SecMode : PLAIN [+PRL]
BASE_v1812 DA TYPE : DA_PL.bin/DA_PL_CRYPTO20.bin

CHIP : MT6570
BROM : SecMode : PLAIN [+PRL]
BASE_v1812 DA TYPE : MTK_AllInOne_DA.bin

CHIP : MT6763
BROM : SecMode : SBC+SDA
BROM : SLA
DA TYPE : DA_PL_CRYPTO.bin

CHIP : MT6797
BROM : SecMode : SBC
BASE_v1812 DA TYPE : MTK_AllInOne_DA.bin

GOOD LUCK

gracy_elec

04-21-2018 19:26

..::CONDOR M1PLUS MT6757 READ NVRAM DONEs::..

SUCCESSFULLY READ NVRAM (CONDOR M1PLUS MT6757)USB

Operation : Read Security [ v2.00 r1 ]

Quote:

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM37)
MODE : PRELOADER PORT
PORT : 37
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_SP.bin
AGENT : Found MT6757
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256,00 KB ]
DRAM: 0x100000000 [ 4,00 GB ]

EMMC: 150100444836444D4205C5A6ACDBA45F
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : DH6DMB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0xE8F800000 [ 58,24 GB ]

CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 , EVOL : 0x0000

RNID : 95FD10C4B671153AC51F53360270557

DA : USB : HIGH-SPEED

Boot done!

Board Platform : mt6757
Build Time : 1507530603
Display ID : Allure_M1_Plus
Patch Level : NRD90M
Product Info : gnsz6757_66_n
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2017-09-05
Product Board : Allure_M1_Plus
Product Brand : Condor
Product Device : Allure_M1_Plus
Product Manfct : SPA Condor Electronics
Product Model : Allure M1 Plus
Product Name : Allure_M1_Plus

NVRAM check : Passed!

NVM saved as :
MT6757__eMMC__xxxxxxxx.mt_sec
NVM saved to : G:\CONDOR BACKUP\

Done!
Elapsed: 00:00:19

THANKS INFINITY-BOX TEAM

gracy_elec

04-21-2018 19:32

..::CONDOR M1PLUS MT6757 READ FIRMWARE DONEs::..

SUCCESSFULLY READ FIRMWARE (CONDOR M1PLUS MT6757)USB

Operation : Read Firmware [ v2.00 r1 ]

Quote:

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM37)
MODE : PRELOADER PORT
PORT : 37
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_SP.bin
AGENT : Found MT6757
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256,00 KB ]
DRAM: 0x100000000 [ 4,00 GB ]

EMMC: 150100444836444D4205C5A6ACDBA45F
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : DH6DMB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0xE8F800000 [ 58,24 GB ]

CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 , EVOL : 0x0000

RNID : 95FD10C4B671153AC51F53360270557

DA : USB : HIGH-SPEED

Boot done!

Board Platform : mt6757
Build Time : 1507530603
Display ID : Allure_M1_Plus
Patch Level : NRD90M
Product Info : gnsz6757_66_n
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2017-09-05
Product Board : Allure_M1_Plus
Product Brand : Condor
Product Device : Allure_M1_Plus
Product Manfct : SPA Condor Electronics
Product Model : Allure M1 Plus
Product Name : Allure_M1_Plus

MT6757__SPA_Condor_Electronics__Allure_M1_Plus__7. 0__Allure_M1_Plus__NRD90M__gnsz6757_66_n

Read : preloader.bin
Read : recovery.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : md1arm7.img
Read : md3rom.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : tz.img
Read : system.img
ExtSparse : Compression ratio : 18%
Read : cache.img
Read : userdata.img

Android Info saved : _Android_info.txt
Scatter : MT6757_Android_scatter.txt
Saved to : G:\CONDOR BACKUP\MT6757__SPA_Condor_Electronics__Allure_M1_P lus__7.0__Allure_M1_Plus__NRD90M__gnsz6757_66_n\

Done!
Elapsed: 00:03:30

THANKS INFINITY-BOX TEAM

gracy_elec

04-21-2018 19:36

..::CONDOR M1PLUS MT6757 FRP REMOVE DONEs::..

SUCCESSFULLY REMOVE FRP (CONDOR M1PLUS MT6757)USB

Operation : Reset Settings/Format FS [ v2.00 r1 ]

Quote:

THANKS INFINITY-BOX TEAM

VIJAY888

04-22-2018 15:59

PTFN : MediaTek USB Port (COM62)
MODE : BOOTROM
PORT : 62
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6572 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
TYPE : LEGACY MTK

Info : Device is not supported yet!

Reconnect Power/Cable!

gracy_elec

04-22-2018 16:21

Quote:

Originally Posted by VIJAY888 (Post 13094074)

Hello @VIJAY888; try to read update section is this cpu mention no new update is made for new encrypted cpu and for old cpu you can try v1.58

Good Luck

gracy_elec

04-23-2018 16:38

OPPO CPH1609 MT6750 READ INFO,READ FIRMWEAR & REMOVE FRP Done

SUCCESSFULLY READ INFO,READ FIRMWEAR & REMOVE FRP(OPPO CPH1609 MT6750)USB

Operation : Identify [ v2.00 r1 ] - [Click to open]

Operation : Read Firmware [ v2.00 r1 ] - [Click to open]

Operation : Reset Settings/Format FS [ v2.00 r1 ] - [Click to open]

THANKS INFINITY-BOX TEAM

Shantobhai

04-30-2018 18:49

Card found : 9A741B5B , v0136
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r2

Operation : Read Firmware [ v2.00 r2 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK

Info : Device is not supported yet!

Reconnect Power/Cable!

Operation : Read Firmware [ v2.00 r2 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK

Info : Device is not supported yet!

Reconnect Power/Cable!

Operation : Read Firmware [ v2.00 r2 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK

Info : Device is not supported yet!

Reconnect Power/Cable!

hlk	05-04-2018 15:01

lenovo XT1902-3 mtk 6797 read ifo and remove frp in a single click cm2 ver 2

Card found : 956ADCED , v0136
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r2

Operation : Identify [ v2.00 r2 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM223)
MODE : PRELOADER PORT
PORT : 223
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6797
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 450100444634303634019610E62264D5
EMMC: VEN : SANDISK | OEM : 01 | DEV : DF4064
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 44BB6D02F58F7C947A23C6C17E9BBC

DA : USB : HIGH-SPEED

Boot done!

Patch Level : NMB26.54-94
Display ID : NMB26.54-94
Ver. CodeName : REL
Ver. Release : 7.1.1
Sec. Patch : 2017-12-05
Build Time : 1514214693
Product Model : Lenovo K8 Note
Product Brand : lenovo
Product Name : manning_retail
Product Device : manning
Product Manfct : lenovo
Board Platform : mt6797
Product Info : manning

Done!
Elapsed: 00:00:20

frp remove

Operation : Reset Settings/Format FS [ v2.00 r2 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM223)
MODE : PRELOADER PORT
PORT : 223
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6797
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 450100444634303634019610E62264D5
EMMC: VEN : SANDISK | OEM : 01 | DEV : DF4064
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 44BB6D02F58F7C947A23C6C17E9BBC

DA : USB : HIGH-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:34

Reconnect Power/Cable!

hlk	05-05-2018 13:35

as we select cm2 boot file (which are given extra like vivo tecno etc) show error...
plz team update those in our support area with next one

thanks

gracy_elec

05-25-2018 14:19

VIVO 1601 V5S PD1612DF MT6755 PATTERN & FRP REMOVE Done

SUCCESSFULLY REMOVE PATTERN & FRP(VIVO 1601 V5S PD1612DF)USB [PROT-1]

SUCCESS REPORT - [Click to open]

THANKS INFINITY-BOX TEAM

gracy_elec

05-25-2018 14:22

OPPO F1S A1601 MT6755 PATTERN & FRP REMOVE Done

SUCCESSFULLY REMOVE PATTERN & FRP(OPPO F1S A1601)USB

SUCCESS REPORT - [Click to open]

THANKS INFINITY-BOX TEAM

gracy_elec

05-26-2018 10:10

MOTO M XT1663 MT6755 NO IMEI AND NVRAM EMPTY REPAIR Done

SUCCESSFULLY REPAIR NO IMEI AND NVRAM EMPTY(MOTO M XT1663 MT6755)USB

SUCCESS REPORT - [Click to open]

THANKS INFINITY-BOX TEAM

forutele

05-28-2018 12:43

Operation : Identify [ v2.00 r3 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO20.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00007017 : DA SEND ERROR!
ERROR : SECURE BOOT : SLA REQUIRED IN BROM MODE!
INFO : BROM Level : CERT/AUTH required! Try boot device in PRELOADER mode with select PL/PL_CRYPTO type!

Error : Fail to init protocol!
Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

sir is what happen any wrong plese help

gracy_elec

05-28-2018 12:52

HELLO @forutele; WHICH PHONE YOU R TRYING YOU ONLY POST LOG NOT POST PHONE MODEL

GOOD LUCK

forutele

05-28-2018 13:25

Quote:

Originally Posted by gracy_elec (Post 13154255)

HELLO @forutele; WHICH PHONE YOU R TRYING YOU ONLY POST LOG NOT POST PHONE MODEL

GOOD LUCK

haha;) sorry sir
model is vivo v5s
regard

gracy_elec

05-28-2018 13:33

HELLO @forutele;read my post #39
1)read info
2)backup firmware
3)after that you can use other option

goo luck

vishalkpin07024

05-30-2018 09:01

oppo f5 cph1723 possibly to imei repair cm2 team..?

gracy_elec

06-05-2018 16:31

VIVO-1714 Y69 PD1705F_EX MT6755 PATTERN LOCK REMOVE Done

SUCCESSFULLY REMOVE PATTERN LOCK (VIVO-1714 Y69 PD1705F_EX MT6755)USB

SUCCESS REPORT - [Click to open]

THANKS INFINITY-BOX TEAM

icloudboss2016

06-06-2018 04:06

Please add VIVO Y83......i have file but invalid scatter shows in cm2

dark_boy99

06-06-2018 07:03

tecno cx

Code:

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r3
 

Operation : Identify [ v2.00 r3 ]
 

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after

2. Insert USB cable in phone

Waiting for device connection ...
 

PTFN : MediaTek PreLoader USB VCOM (Android) (COM30)

MODE : PRELOADER PORT

PORT : 30

Waiting BOOT ack ...

PRELOADER : ACK confirmed!

BROM : Init BROM

BROM init passed!

     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001

     TYPE : MODERN RAPHAEL

BROM : SecLevel : 0x00000000

BROM : SecMode  : PLAIN [+PRL]

BROM : PRELOADER PORT

AGENT : Look for suitable BootChain in DA ... 

AGENT : MTK_AllInOne_DA.bin

AGENT : Found MT6755

AGENT : MTK_DOWNLOAD_AGENT

     BROM : Sending 1st DA ...

BROM : DA sent

BROM :Transfer control to DA ... 

     DA : AGENT started!

DA : SYNC

     DA : MODE : PRELOADER

DA : EXT_RAM initialized!

DA : BOOT to 2nd DA ...

DA : 2ND stage confirmed!

DA : SYNC with DA passed!

DA : Receiving HW info
 

        SRAM: 0x00040000 [ 256.00 KB ]

        DRAM: 0xC0000000 [ 3.00 GB ]
 

        EMMC: 150100524531424D42074F02DCEB932D

        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RE1BMB

        EMMC: 

              BOOT1  : 0x00400000 [ 4.00 MB ]

              BOOT2  : 0x00400000 [ 4.00 MB ]

              RPMB   : 0x00400000 [ 4.00 MB ]

              USER   : 0x3A3E00000 [ 14.56 GB ]
 

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
 

        RNID : BDA9744DBA8591B582425C5B4698B7A
 

DA : USB : HIGH-SPEED
 

Boot done!
 

Patch Level    : NRD90M

Display ID     : CX-H501DEFG-N-170720V133

Ver. CodeName  : REL

Ver. Release   : 7.0

Sec. Patch     : 2017-06-05

Build Time     : 1500558673

Product Model  : TECNO Camon CX

Product Brand  : TECNO

Product Name   : H501

Product Device : TECNO-CX

Product Manfct : TECNO

Board Platform : mt6750

Product Info   : TECNO-CX
 
 

Done!

Elapsed: 00:00:13

dark_boy99

06-06-2018 07:04

tecno cx read firmware

Code:

DA : SYNC

     DA : MODE : PRELOADER

DA : EXT_RAM initialized!

DA : BOOT to 2nd DA ...

DA : 2ND stage confirmed!

DA : SYNC with DA passed!

DA : Receiving HW info
 

        SRAM: 0x00040000 [ 256.00 KB ]

        DRAM: 0xC0000000 [ 3.00 GB ]
 

        EMMC: 150100524531424D42074F02DCEB932D

        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RE1BMB

        EMMC: 

              BOOT1  : 0x00400000 [ 4.00 MB ]

              BOOT2  : 0x00400000 [ 4.00 MB ]

              RPMB   : 0x00400000 [ 4.00 MB ]

              USER   : 0x3A3E00000 [ 14.56 GB ]
 

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
 

        RNID : BDA9744DBA8591B582425C5B4698B7A
 

DA : USB : HIGH-SPEED
 

Boot done!
 

Patch Level    : NRD90M

Display ID     : CX-H501DEFG-N-170720V133

Ver. CodeName  : REL

Ver. Release   : 7.0

Sec. Patch     : 2017-06-05

Build Time     : 1500558673

Product Model  : TECNO Camon CX

Product Brand  : TECNO

Product Name   : H501

Product Device : TECNO-CX

Product Manfct : TECNO

Board Platform : mt6750

Product Info   : TECNO-CX
 

MT6750__TECNO__TECNO_Camon_CX__7.0__CX-H501DEFG-N-170720V133__NRD90M__TECNO-CX
 

Read : preloader.bin

Read : recovery.img

Read : proinfo.img

Read : md1rom.img

Read : md1dsp.img

Read : md1arm7.img

Read : md3rom.img

Read : nvram.bin

Read : lk.bin

Read : boot.img

Read : logo.bin

Read : tz.img

Read : secro.img

Read : system.img

ExtSparse : Compression ratio : 15%

Read : cache.img

Read : userdata.img
 

FW Size  : 3.62 GB

Android Info saved : _Android_info.txt

Scatter  : MT6750_Android_scatter.txt

Saved to : D:\file flash\MTK_Read_CM2\MT6750__TECNO__TECNO_Camon_CX__7.0__CX-H501DEFG-N-170720V133__NRD90M__TECNO-CX\
 

Done!

Elapsed: 00:06:29

All times are GMT +1. The time now is 04:02.

Page 1 of 4

Show 50 post(s) from this thread on one page

Page generated in 0.92255 seconds with 6 queries

SEO by vBSEO