GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 04-16-2018, 15:32   #1 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Thumbs up ..::CM2MT2 SECURE BOOT SUCCESS REPORT STARTs::..


SUCCESSFULLY READ INFO (OPPO F5 CPH1723EX MT6763)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Identify [ v2.00 r1 ]

Quote:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6763
EMI : SRC : preloader_oppo6763_17031.bin
EMI : CNT : 000F
EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [0 B ]
EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG | DEV : DH6DMB : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG | DEV : 3H6CMB : RAM : [ 6.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG | DEV : GE6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG | DEV : RD64MB : RAM : [ 4.00 GB ]
EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : UNKNOWN | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100525836344D4203E046DA2B84D5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : EE09697D43DC32B25D65CFBCA266D28E

DA : USB : HIGH-SPEED

Boot done!

Patch Level : N6F26Q
Ver. CodeName : REL
Ver. Release : 7.1.1
Sec. Patch : 2017-10-05
Build Time : 1508524623
Product Manfct : OPPO
Board Platform : mt6763
Product Model : OPPO CPH1723
Product Brand : OPPO
Product Name : CPH1723
Product Device : M6763A
Product Board : full_oppo6763_17031
Product Info : oppo6763_17031
SW Version : A.02
SW OTA Version : M6763A_11.A.02_0020_201710210033
SW OTA Name : CPH1723EX_11_A.02_171021
Display ID : CPH1723EX_11_A.02_171021
Kernel Info : 4.4.22-G201710210033

NVRAM check : Passed!

Done!
Elapsed: 00:00:27
THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following 18 Users Say Thank You to gracy_elec For This Useful Post:
Show/Hide list of the thanked
Old 04-16-2018, 15:45   #2 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Thumbs up ..::OPPO F5 CPH1723EX MT6763 SECURE BOOT READ FIRMWARE Done::..

SUCCESSFULLY READ FIRMWARE(OPPO F5 CPH1723EX MT6763)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Read Firmware [ v2.00 r1 ]
Quote:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6763
EMI : SRC : preloader_oppo6763_17031.bin
EMI : CNT : 000F
EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [0 B ]
EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG | DEV : DH6DMB : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG | DEV : 3H6CMB : RAM : [ 6.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG | DEV : GE6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG | DEV : RD64MB : RAM : [ 4.00 GB ]
EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : UNKNOWN | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100525836344D4203E046DA2B84D5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : EE09697D43DC32B25D65CFBCA266D28E

DA : USB : HIGH-SPEED

Boot done!

Patch Level : N6F26Q
Ver. CodeName : REL
Ver. Release : 7.1.1
Sec. Patch : 2017-10-05
Build Time : 1508524623
Product Manfct : OPPO
Board Platform : mt6763
Product Model : OPPO CPH1723
Product Brand : OPPO
Product Name : CPH1723
Product Device : M6763A
Product Board : full_oppo6763_17031
Product Info : oppo6763_17031
SW Version : A.02
SW OTA Version : M6763A_11.A.02_0020_201710210033
SW OTA Name : CPH1723EX_11_A.02_171021
Display ID : CPH1723EX_11_A.02_171021
Kernel Info : 4.4.22-G201710210033

MT6763__OPPO__OPPO_CPH1723__7.1.1__CPH1723EX_11_A. 02_171021__N6F26Q__oppo6763_17031

Read : preloader.bin
Read : recovery.img
Read : oppo_custom.img
Read : persist.img
ExtSparse : Compression ratio : 100%
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : tinysys-sspm.bin
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : tz.img
Read : system.img
ExtSparse : Compression ratio : 26%
Read : cache.img
Read : userdata.img

Android Info saved : _Android_info.txt
Scatter : MT6763_Android_scatter.txt
Saved to : G:\OPPO BACKUP \MT6763__OPPO__OPPO_CPH1723__7.1.1__CPH1723EX_11_A .02_171021__N6F26Q__oppo6763_17031\

Done!
Elapsed: 00:08:40
THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following 10 Users Say Thank You to gracy_elec For This Useful Post:
Show/Hide list of the thanked
Old 04-16-2018, 15:52   #3 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Thumbs up ..::OPPO F5 CPH1723EX MT6763 SECURE BOOT READ NVRAM Done::..

SUCCESSFULLY READ NVRAM(OPPO F5 CPH1723EX MT6763)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Read Security [ v2.00 r1 ]
Quote:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6763
EMI : SRC : preloader_oppo6763_17031.bin
EMI : CNT : 000F
EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [0 B ]
EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG | DEV : DH6DMB : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG | DEV : 3H6CMB : RAM : [ 6.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG | DEV : GE6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG | DEV : RD64MB : RAM : [ 4.00 GB ]
EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : UNKNOWN | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100525836344D4203E046DA2B84D5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : EE09697D43DC32B25D65CFBCA266D28E

DA : USB : HIGH-SPEED

Boot done!


NVRAM check : Passed!

NVM saved as : MT6763__eMMC__.mt_sec
NVM saved to : G:\OPPO BACKUP\

Done!
Elapsed: 00:00:27

Reconnect Power/Cable!
THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following 7 Users Say Thank You to gracy_elec For This Useful Post:
Show/Hide list of the thanked
Old 04-16-2018, 16:15   #4 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Thumbs up ..::OPPO F5 CPH1723EX MT6763 SECURE BOOT Memory Tool Init DONE::..

SUCCESSFULLY CONNECT MEMORYTOOL[eMMC](OPPO F5 CPH1723EX MT6763)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Memory Tool Init [ v2.00 r1 ]
Quote:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6763
EMI : SRC : preloader_oppo6763_17031.bin
EMI : CNT : 000F
EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [0 B ]
EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG | DEV : DH6DMB : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG | DEV : 3H6CMB : RAM : [ 6.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG | DEV : GE6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG | DEV : RD64MB : RAM : [ 4.00 GB ]
EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : UNKNOWN | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100525836344D4203E046DA2B84D5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : EE09697D43DC32B25D65CFBCA266D28E

DA : USB : HIGH-SPEED

Boot done!

Set default path : C:\InfinityBox\CM2MT2\phdata\

Ready!


THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following 6 Users Say Thank You to gracy_elec For This Useful Post:
Show/Hide list of the thanked
Old 04-16-2018, 16:24   #5 (permalink)
No Life Poster
 
shailccna's Avatar
 
Join Date: Sep 2006
Location: some where in india
Posts: 1,296
Member: 350232
Status: Offline
Thanks Meter: 204
now post a screen shot with flash this set with reded firmware. wating for screen shot
  Reply With Quote
The Following User Says Thank You to shailccna For This Useful Post:
Old 04-16-2018, 16:30   #6 (permalink)
Freak Poster
 
Join Date: Apr 2017
Posts: 141
Member: 2702540
Status: Offline
Thanks Meter: 38
please direct link of InfinityBox_install_CM2MT2_v2.00.7z
  Reply With Quote
Old 04-16-2018, 16:36   #7 (permalink)
Freak Poster
 
Join Date: Oct 2009
Location: INDIA TO RSA.
Posts: 162
Member: 1143337
Status: Offline
Thanks Meter: 43
Quote:
Originally Posted by mabo13 View Post
please direct link of InfinityBox_install_CM2MT2_v2.00.7z
link is here.

https://drive.google.com/file/d/12gQ...flLsjcuSV/view
  Reply With Quote
The Following User Says Thank You to TALHAGSM For This Useful Post:
Old 04-17-2018, 10:29   #8 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Thumbs up ..::OPPO F1 PLUS A1601EX MT6750|MT6755 SECURE BOOT READ INFO Done::..

SUCCESSFULLY READ INFO (OPPO F1S PLUS A1601EX MT6750)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Identify [ v2.00 r1 ]
Quote:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInTwo_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 90014A484247346132A41836740573FD
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 71FCD0B2E60D9F37CCEF56F74B57EA

DA : USB : FULL-SPEED

Boot done!

Product Model : A1601
Product Brand : OPPO
Product Name : A1601
Product Device : A1601
Product Board : full_oppo6750_15331
Product Info : oppo6750_15331
SW Version : A.32
SW OTA Version : A1601EX_11.A.32_INT_032_201707211426
SW OTA Name : A1601EX_11_A.32_170721
Display ID : A1601EX_11_A.32_170721
Kernel Info : 3.10.72-G201707211426
Product Model : A1601
Product Brand : OPPO
Product Name : A1601
Product Device : A1601
Product Board : full_oppo6750_15331
Product Info : oppo6750_15331
SW Version : A.32
SW OTA Version : A1601EX_11.A.32_INT_032_201707211426
SW OTA Name : A1601EX_11_A.32_170721
Display ID : A1601EX_11_A.32_170721
Kernel Info : 3.10.72-G201707211426
Patch Level : LMY47I
Ver. CodeName : REL
Ver. Release : 5.1
Sec. Patch : 2017-05-05
Build Time : 1500621229
Product Manfct : OPPO
Board Platform : mt6750
Product Model : A1601
Product Brand : OPPO
Product Name : A1601
Product Device : A1601
Product Board : full_oppo6750_15331
Product Info : oppo6750_15331
SW Version : A.32
SW OTA Version : A1601EX_11.A.32_INT_032_201707211426
SW OTA Name : A1601EX_11_A.32_170721
Display ID : A1601EX_11_A.32_170721
Kernel Info : 3.10.72-G201707211426

IMEI[0] : 86XXXXXXXXXXXX
IMEI[1] : 86XXXXXXXXXXXX
NVRAM check : Passed!

Done!
Elapsed: 00:00:15
THANKS INFINITY-BOX TEAM

Last edited by InfinityHelp; 04-19-2018 at 13:27. Reason: model name correction
  Reply With Quote
The Following 5 Users Say Thank You to gracy_elec For This Useful Post:
Show/Hide list of the thanked
Old 04-17-2018, 10:39   #9 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Thumbs up .::OPPO F1 PLUS A1601EX MT6750|MT6755 SECURE BOOT READ FIRMWARE Done::..

SUCCESSFULLY READ FIRMWARE(OPPO F1S PLUS A1601EX MT6750|MT6755)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Read Firmware [ v2.00 r1 ]
Quote:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInTwo_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 90014A484247346132A41836740573FD
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 71FCD0B2E60D9F37CCEF56F74B57EA

DA : USB : FULL-SPEED

Boot done!

Product Model : A1601
Product Brand : OPPO
Product Name : A1601
Product Device : A1601
Product Board : full_oppo6750_15331
Product Info : oppo6750_15331
SW Version : A.32
SW OTA Version : A1601EX_11.A.32_INT_032_201707211426
SW OTA Name : A1601EX_11_A.32_170721
Display ID : A1601EX_11_A.32_170721
Kernel Info : 3.10.72-G201707211426
Product Model : A1601
Product Brand : OPPO
Product Name : A1601
Product Device : A1601
Product Board : full_oppo6750_15331
Product Info : oppo6750_15331
SW Version : A.32
SW OTA Version : A1601EX_11.A.32_INT_032_201707211426
SW OTA Name : A1601EX_11_A.32_170721
Display ID : A1601EX_11_A.32_170721
Kernel Info : 3.10.72-G201707211426
Patch Level : LMY47I
Ver. CodeName : REL
Ver. Release : 5.1
Sec. Patch : 2017-05-05
Build Time : 1500621229
Product Manfct : OPPO
Board Platform : mt6750
Product Model : A1601
Product Brand : OPPO
Product Name : A1601
Product Device : A1601
Product Board : full_oppo6750_15331
Product Info : oppo6750_15331
SW Version : A.32
SW OTA Version : A1601EX_11.A.32_INT_032_201707211426
SW OTA Name : A1601EX_11_A.32_170721
Display ID : A1601EX_11_A.32_170721
Kernel Info : 3.10.72-G201707211426

MT6750__OPPO__A1601__5.1__A1601EX_11_A.32_170721__ LMY47I__oppo6750_15331

Read : preloader.bin
Read : recovery.img
Read : oppo_custom.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : md1arm7.img
Read : md3rom.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 3%
Read : cache.img
Read : userdata.img

Android Info saved : _Android_info.txt
Scatter : MT6750_Android_scatter.txt
Saved to : G:\OPPO BACKUP\MT6750__OPPO__A1601__5.1__A1601EX_11_A.32_1 70721__LMY47I__oppo6750_15331\

Done!
Elapsed: 00:05:23
THANKS INFINITY-BOX TEAM

Last edited by InfinityHelp; 04-19-2018 at 13:27. Reason: model name correction
  Reply With Quote
The Following 2 Users Say Thank You to gracy_elec For This Useful Post:
Old 04-17-2018, 10:43   #10 (permalink)
Freak Poster
 
Aamir8794's Avatar
 
Join Date: Jan 2014
Location: In Sanjary's Heart
Age: 25
Posts: 196
Member: 2114042
Status: Offline
Sonork: 100.1652032
Thanks Meter: 45
Donate money to this user
can i repair IMEI oppo f5??
  Reply With Quote
Old 04-17-2018, 10:46   #11 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Thumbs up .::OPPO F1 PLUS A1601EX MT6750|MT6755 SECURE BOOT READ NVRAM Done::..

SUCCESSFULLY READ NVRAM(OPPO F1S PLUS A1601EX MT6750|MT6755)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Read Security [ v2.00 r1 ]
Quote:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllIn_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 90014A484247346132A41836740573FD
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 71FCD0B2E60D9F37CCEF56F74B57EA

DA : USB : FULL-SPEED

Boot done!

SEC Data :
IMEI[0] : 86XXXXXXXXXXXX
IMEI[1] : 86XXXXXXXXXXXX

NVRAM check : Passed!

NVM saved as : MT6755__eMMC__86XXXXXXXXXXX.mt_sec
NVM saved to : G:\OPPO BACKUP\

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!
THANKS INFINITY-BOX TEAM

Last edited by InfinityHelp; 04-19-2018 at 13:27. Reason: model name correction
  Reply With Quote
The Following 3 Users Say Thank You to gracy_elec For This Useful Post:
Show/Hide list of the thanked
Old 04-17-2018, 10:54   #12 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Thumbs up .::OPPO F1 PLUS A1601EX MT6750|MT6755 SECURE BOOT FRP REMOVE Done::..

SUCCESSFULLY REMOVE FRP(OPPO F1S PLUS A1601EX MT6750|MT6755)USB

Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Reset Settings/Format FS [ v2.00 r1 ]
Quote:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllIn_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 90014A484247346132A41836740573FD
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 71FCD0B2E60D9F37CCEF56F74B57EA

DA : USB : FULL-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:13

Reconnect Power/Cable!
THANKS INFINITY-BOX TEAM

Last edited by InfinityHelp; 04-19-2018 at 13:27. Reason: model name correction
  Reply With Quote
The Following 2 Users Say Thank You to gracy_elec For This Useful Post:
Old 04-17-2018, 11:38   #13 (permalink)
Freak Poster
 
MDxavi's Avatar
 
Join Date: Feb 2013
Posts: 317
Member: 1882912
Status: Offline
Sonork: 100.1677703
Thanks Meter: 236
OPPO F1S Identify

Code:
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Identify [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM57)
MODE : BOOTROM
PORT : 57
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
     EMI : CNT : 0009
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0x100000000 [ 4,00 GB ]

        EMMC: 150100525831344D42079BFDD819A3E1
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX14MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x747C00000 [ 29,12 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : D0AD212FE8657637A37A68A47C429C1F

DA : USB : FULL-SPEED

Boot done!

Product Model  : A1601
Product Brand  : OPPO
Product Name   : A1601
Product Device : A1601
Product Board  : full_oppo6750_15331
Product Info   : oppo6750_15331
SW Version     : A.28
SW OTA Version : A1601EX_11.A.28_INT_028_201702102025
SW OTA Name    : A1601EX_11_A.28_170210
Display ID     : A1601EX_11_A.28_170210
Kernel Info    : 3.10.72-G201702102025
Product Model  : A1601
Product Brand  : OPPO
Product Name   : A1601
Product Device : A1601
Product Board  : full_oppo6750_15331
Product Info   : oppo6750_15331
SW Version     : A.28
SW OTA Version : A1601EX_11.A.28_INT_028_201702102025
SW OTA Name    : A1601EX_11_A.28_170210
Display ID     : A1601EX_11_A.28_170210
Kernel Info    : 3.10.72-G201702102025
Patch Level    : LMY47I
Ver. CodeName  : REL
Ver. Release   : 5.1
Sec. Patch     : 2017-02-05
Build Time     : 1486731883
Product Manfct : OPPO
Board Platform : mt6750
Product Model  : A1601
Product Brand  : OPPO
Product Name   : A1601
Product Device : A1601
Product Board  : full_oppo6750_15331
Product Info   : oppo6750_15331
SW Version     : A.28
SW OTA Version : A1601EX_11.A.28_INT_028_201702102025
SW OTA Name    : A1601EX_11_A.28_170210
Display ID     : A1601EX_11_A.28_170210
Kernel Info    : 3.10.72-G201702102025

IMEI[0] : 86810-------------
IMEI[1] : 86810-------------
NVRAM check : Passed!

Done!
Elapsed: 00:00:14

RESET FRP DONE

Code:
Operation : Reset Settings/Format FS [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM57)
MODE : BOOTROM
PORT : 57
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
     EMI : CNT : 0009
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0x100000000 [ 4,00 GB ]

        EMMC: 150100525831344D42079BFDD819A3E1
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX14MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x747C00000 [ 29,12 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : D0AD212FE8657637A37A68A47C429C1F

DA : USB : FULL-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:14

Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to MDxavi For This Useful Post:
Old 04-17-2018, 11:52   #14 (permalink)
Freak Poster
 
ORITECH's Avatar
 
Join Date: Sep 2015
Posts: 188
Member: 2462860
Status: Offline
Thanks Meter: 60
please share nvdata oppo f5, thx
  Reply With Quote
Old 04-17-2018, 12:22   #15 (permalink)
Freak Poster
 
MDxavi's Avatar
 
Join Date: Feb 2013
Posts: 317
Member: 1882912
Status: Offline
Sonork: 100.1677703
Thanks Meter: 236
OPPO F1 Plus (X9009)

Operation : Identify

Code:
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r1

Operation : Identify [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM57)
MODE : BOOTROM
PORT : 57
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
     EMI : CNT : 0009
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0x100000000 [ 4,00 GB ]

        EMMC: 150100524331344D42074787D04D7301
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RC14MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0xE8F800000 [ 58,24 GB ]

        CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 19D9D2E45DF1530BDD9FDA7B28933CBB

DA : USB : FULL-SPEED

Boot done!

Patch Level    : MRA58K
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2017-03-05
Build Time     : 1490695626
Product Manfct : OPPO
Board Platform : mt6755
Product Model  : X9009
Product Brand  : OPPO
Product Name   : X9009
Product Device : X9009
Product Board  : full_oppo6755_15311
Product Info   : oppo6755_15311
SW Version     : D.01
SW OTA Version : X9009EX_11.D.01_INT_001_201703281711
SW OTA Name    : X9009EX_11_D.01_170328
Display ID     : X9009EX_11_D.01_170328
Kernel Info    : 3.18.22-G201703281711

IMEI[0] : 35344--------------
IMEI[1] : 35344--------------
NVRAM check : Passed!

Done!
Elapsed: 00:00:15

Operation : Read Firmware

Code:
Operation : Read Firmware [ v2.00 r1 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM57)
MODE : BOOTROM
PORT : 57
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
     EMI : CNT : 0009
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0x100000000 [ 4,00 GB ]

        EMMC: 150100524331344D42074787D04D7301
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RC14MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0xE8F800000 [ 58,24 GB ]

        CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 19D9D2E45DF1530BDD9FDA7B28933CBB

DA : USB : FULL-SPEED

Boot done!

Patch Level    : MRA58K
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2017-03-05
Build Time     : 1490695626
Product Manfct : OPPO
Board Platform : mt6755
Product Model  : X9009
Product Brand  : OPPO
Product Name   : X9009
Product Device : X9009
Product Board  : full_oppo6755_15311
Product Info   : oppo6755_15311
SW Version     : D.01
SW OTA Version : X9009EX_11.D.01_INT_001_201703281711
SW OTA Name    : X9009EX_11_D.01_170328
Display ID     : X9009EX_11_D.01_170328
Kernel Info    : 3.18.22-G201703281711

MT6755__OPPO__X9009__6.0__X9009EX_11_D.01_170328__MRA58K__oppo6755_15311

Read : preloader.bin
Read : recovery.img
Read : oppo_custom.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : md1arm7.img
Read : md3rom.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 9%
Read : cache.img
Read : userdata.img

Android Info saved : _Android_info.txt
Scatter  : MT6755_Android_scatter.txt
Saved to : C:\Users\CM2_GSM\Desktop\MT6755__OPPO__X9009__6.0__X9009EX_11_D.01_170328__MRA58K__oppo6755_15311\

Done!
Elapsed: 00:05:06
  Reply With Quote
The Following 3 Users Say Thank You to MDxavi For This Useful Post:
Show/Hide list of the thanked
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 01:40.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.26765 seconds with 8 queries

SEO by vBSEO