GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box


Reply
 
LinkBack Thread Tools Display Modes
Old 04-21-2018, 20:32   #31 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,966
Member: 118520
Status: Offline
Thanks Meter: 3,240
Arrow ..::CONDOR M1PLUS MT6757 READ FIRMWARE DONEs::..


SUCCESSFULLY READ FIRMWARE (CONDOR M1PLUS MT6757)USB

Operation : Read Firmware [ v2.00 r1 ]
Quote:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM37)
MODE : PRELOADER PORT
PORT : 37
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_SP.bin
AGENT : Found MT6757
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256,00 KB ]
DRAM: 0x100000000 [ 4,00 GB ]

EMMC: 150100444836444D4205C5A6ACDBA45F
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : DH6DMB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0xE8F800000 [ 58,24 GB ]

CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 , EVOL : 0x0000

RNID : 95FD10C4B671153AC51F53360270557

DA : USB : HIGH-SPEED

Boot done!

Board Platform : mt6757
Build Time : 1507530603
Display ID : Allure_M1_Plus
Patch Level : NRD90M
Product Info : gnsz6757_66_n
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2017-09-05
Product Board : Allure_M1_Plus
Product Brand : Condor
Product Device : Allure_M1_Plus
Product Manfct : SPA Condor Electronics
Product Model : Allure M1 Plus
Product Name : Allure_M1_Plus

MT6757__SPA_Condor_Electronics__Allure_M1_Plus__7. 0__Allure_M1_Plus__NRD90M__gnsz6757_66_n

Read : preloader.bin
Read : recovery.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : md1arm7.img
Read : md3rom.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : tz.img
Read : system.img
ExtSparse : Compression ratio : 18%
Read : cache.img
Read : userdata.img

Android Info saved : _Android_info.txt
Scatter : MT6757_Android_scatter.txt
Saved to : G:\CONDOR BACKUP\MT6757__SPA_Condor_Electronics__Allure_M1_P lus__7.0__Allure_M1_Plus__NRD90M__gnsz6757_66_n\

Done!
Elapsed: 00:03:30
THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following 2 Users Say Thank You to gracy_elec For This Useful Post:
Old 04-21-2018, 20:36   #32 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,966
Member: 118520
Status: Offline
Thanks Meter: 3,240
Arrow ..::CONDOR M1PLUS MT6757 FRP REMOVE DONEs::..

SUCCESSFULLY REMOVE FRP (CONDOR M1PLUS MT6757)USB

Operation : Reset Settings/Format FS [ v2.00 r1 ]
Quote:
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM37)
MODE : PRELOADER PORT
PORT : 37
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_SP.bin
AGENT : Found MT6757
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256,00 KB ]
DRAM: 0x100000000 [ 4,00 GB ]

EMMC: 150100444836444D4205C5A6ACDBA45F
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : DH6DMB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0xE8F800000 [ 58,24 GB ]

CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 , EVOL : 0x0000

RNID : 95FD10C4B671153AC51F53360270557

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed:00:00:13

Reconnect Power/Cable!
THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following User Says Thank You to gracy_elec For This Useful Post:
Old 04-22-2018, 16:59   #33 (permalink)
Crazy Poster
 
Join Date: Nov 2011
Posts: 51
Member: 1690272
Status: Offline
Thanks Meter: 5
PTFN : MediaTek USB Port (COM62)
MODE : BOOTROM
PORT : 62
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6572 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
TYPE : LEGACY MTK

Info : Device is not supported yet!

Reconnect Power/Cable!
  Reply With Quote
Old 04-22-2018, 17:21   #34 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,966
Member: 118520
Status: Offline
Thanks Meter: 3,240
Quote:
Originally Posted by VIJAY888 View Post
PTFN : MediaTek USB Port (COM62)
MODE : BOOTROM
PORT : 62
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6572 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
TYPE : LEGACY MTK

Info : Device is not supported yet!

Reconnect Power/Cable!
Hello @VIJAY888; try to read update section is this cpu mention no new update is made for new encrypted cpu and for old cpu you can try v1.58

Good Luck
  Reply With Quote
Old 04-23-2018, 17:38   #35 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,966
Member: 118520
Status: Offline
Thanks Meter: 3,240
Thumbs up OPPO CPH1609 MT6750 READ INFO,READ FIRMWEAR & REMOVE FRP Done

SUCCESSFULLY READ INFO,READ FIRMWEAR & REMOVE FRP(OPPO CPH1609 MT6750)USB



1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM42)
MODE : BOOTROM
PORT : 42
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6755
EMI : SRC : preloader_oppo6750_16391.bin
EMI : CNT : 0006
EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100525831344D42 : VEN : SAMSUNG | DEV : RX14MB : RAM : [ 4.00 GB ]
EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX | DEV : HBG4a2 : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 13014E51334A393756 : VEN : UNKNOWN | DEV : Q3J97V : RAM : [ 3.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 150100524836344D42054346CEEE24F5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RH64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 6B04A90D5AC4C43AADA340E89A29B894

DA : USB : FULL-SPEED

Boot done!

Patch Level : MRA58K
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2018-02-05
Build Time : 1517825272
Product Manfct : OPPO
Board Platform : mt6750
Product Model : CPH1609
Product Brand : OPPO
Product Name : CPH1609
Product Device : CPH1609
Product Board : full_oppo6750_16391
Product Info : oppo6750_16391
SW Version : A.21
SW OTA Version : CPH1609EX_11.A.21_INT_0210_201802051657
SW OTA Name : CPH1609EX_11_A.21_180205
Display ID : CPH1609EX_11_A.21_180205
Kernel Info : 3.18.22-G201802051657


Done!
Elapsed: 00:00:16





1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM42)
MODE : BOOTROM
PORT : 42
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6755
EMI : SRC : preloader_oppo6750_16391.bin
EMI : CNT : 0006
EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100525831344D42 : VEN : SAMSUNG | DEV : RX14MB : RAM : [ 4.00 GB ]
EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX | DEV : HBG4a2 : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 13014E51334A393756 : VEN : UNKNOWN | DEV : Q3J97V : RAM : [ 3.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 150100524836344D42054346CEEE24F5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RH64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 6B04A90D5AC4C43AADA340E89A29B894

DA : USB : FULL-SPEED

Boot done!

Patch Level : MRA58K
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2018-02-05
Build Time : 1517825272
Product Manfct : OPPO
Board Platform : mt6750
Product Model : CPH1609
Product Brand : OPPO
Product Name : CPH1609
Product Device : CPH1609
Product Board : full_oppo6750_16391
Product Info : oppo6750_16391
SW Version : A.21
SW OTA Version : CPH1609EX_11.A.21_INT_0210_201802051657
SW OTA Name : CPH1609EX_11_A.21_180205
Display ID : CPH1609EX_11_A.21_180205
Kernel Info : 3.18.22-G201802051657

MT6750__OPPO__CPH1609__6.0__CPH1609EX_11_A.21_1802 05__MRA58K__oppo6750_16391

Read : preloader.bin
Read : recovery.img
Read : oppo_custom.img
Read : persist.img
ExtSparse : Compression ratio : 100%
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : md1arm7.img
Read : md3rom.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 3%
Read : cache.img
Read : userdata.img

Android Info saved : _Android_info.txt
Scatter : MT6750_Android_scatter.txt
Saved to : G:\MT6750__OPPO__CPH1609__6.0__CPH1609EX_11_A.21_1 80205__MRA58K__oppo6750_16391\

Done!
Elapsed: 00:06:50





1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM42)
MODE : BOOTROM
PORT : 42
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6755
EMI : SRC : preloader_oppo6750_16391.bin
EMI : CNT : 0006
EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100525831344D42 : VEN : SAMSUNG | DEV : RX14MB : RAM : [ 4.00 GB ]
EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX | DEV : HBG4a2 : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 13014E51334A393756 : VEN : UNKNOWN | DEV : Q3J97V : RAM : [ 3.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 150100524836344D42054346CEEE24F5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RH64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 6B04A90D5AC4C43AADA340E89A29B894

DA : USB : FULL-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:14

Reconnect Power/Cable!



THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following 2 Users Say Thank You to gracy_elec For This Useful Post:
Old 04-30-2018, 19:49   #36 (permalink)
No Life Poster
 
Shantobhai's Avatar
 
Join Date: Dec 2007
Location: Bangladesh
Age: 37
Posts: 1,629
Member: 648647
Status: Offline
Sonork: 100.1603328
Thanks Meter: 966
Card found : 9A741B5B , v0136
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r2

Operation : Read Firmware [ v2.00 r2 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK

Info : Device is not supported yet!

Reconnect Power/Cable!


Operation : Read Firmware [ v2.00 r2 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK

Info : Device is not supported yet!

Reconnect Power/Cable!


Operation : Read Firmware [ v2.00 r2 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK

Info : Device is not supported yet!

Reconnect Power/Cable!
  Reply With Quote
Old 05-04-2018, 16:01   #37 (permalink)
hlk
Insane Poster
 
Join Date: May 2010
Posts: 79
Member: 1294901
Status: Offline
Thanks Meter: 11
lenovo XT1902-3 mtk 6797 read ifo and remove frp in a single click cm2 ver 2


Card found : 956ADCED , v0136
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r2

Operation : Identify [ v2.00 r2 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM223)
MODE : PRELOADER PORT
PORT : 223
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6797
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 450100444634303634019610E62264D5
EMMC: VEN : SANDISK | OEM : 01 | DEV : DF4064
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 44BB6D02F58F7C947A23C6C17E9BBC

DA : USB : HIGH-SPEED

Boot done!

Patch Level : NMB26.54-94
Display ID : NMB26.54-94
Ver. CodeName : REL
Ver. Release : 7.1.1
Sec. Patch : 2017-12-05
Build Time : 1514214693
Product Model : Lenovo K8 Note
Product Brand : lenovo
Product Name : manning_retail
Product Device : manning
Product Manfct : lenovo
Board Platform : mt6797
Product Info : manning


Done!
Elapsed: 00:00:20


frp remove


Operation : Reset Settings/Format FS [ v2.00 r2 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM223)
MODE : PRELOADER PORT
PORT : 223
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6797
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 450100444634303634019610E62264D5
EMMC: VEN : SANDISK | OEM : 01 | DEV : DF4064
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 44BB6D02F58F7C947A23C6C17E9BBC

DA : USB : HIGH-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:34

Reconnect Power/Cable!
  Reply With Quote
The Following 3 Users Say Thank You to hlk For This Useful Post:
Show/Hide list of the thanked
Old 05-05-2018, 14:35   #38 (permalink)
hlk
Insane Poster
 
Join Date: May 2010
Posts: 79
Member: 1294901
Status: Offline
Thanks Meter: 11
as we select cm2 boot file (which are given extra like vivo tecno etc) show error...
plz team update those in our support area with next one

thanks
  Reply With Quote
Old 05-25-2018, 15:19   #39 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,966
Member: 118520
Status: Offline
Thanks Meter: 3,240
Smile VIVO 1601 V5S PD1612DF MT6755 PATTERN & FRP REMOVE Done

SUCCESSFULLY REMOVE PATTERN & FRP(VIVO 1601 V5S PD1612DF)USB [PROT-1]


Operation : Identify [ v2.00 r3 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM31)
MODE : BOOTROM
PORT : 31
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6755
EMI : SRC : preloader_bbk6750_66_n.bin
EMI : CNT : 0007
EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX | DEV : HBG4a2 : RAM : [ 4.00 GB ]
EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100525831344D42 : VEN : SAMSUNG | DEV : RX14MB : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR3 , ID : 150100525831424D42 : VEN : SAMSUNG | DEV : RX1BMB : RAM : [ 3.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524531424D42 : VEN : SAMSUNG | DEV : RE1BMB : RAM : [ 3.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100524331344D42 : VEN : SAMSUNG | DEV : RC14MB : RAM : [ 4.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00000000 [ 0 B ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 150100524836344D42058D85CE1224DB
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RH64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000

RNID : 771CFF265EECF9D3BAC03EA417B1092D

DA : USB : FULL-SPEED

Boot done!

Patch Level : NRD90M
Display ID : NRD90M release-keys
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2018-03-05
Build Time : 1521796051
Product Model : vivo 1601
Product Brand : vivo
Product Name : 1601
Product Device : 1601
Product Board : mt6750
Product Manfct : vivo
Board Platform : mt6750
Product Info : bbk6750_66_n
Product Model : PD1612DF_EX

IMEI[0] : XXXXXXXXXXXXXXX
IMEI[1] : XXXXXXXXXXXXXXX
IMEI[2] : XXXXXXXXXXXXXXX
NVRAM check : Passed!

Done!
Elapsed: 00:00:19

Operation : Read Security [ v2.00 r3 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM31)
MODE : BOOTROM
PORT : 31
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6755
EMI : SRC : preloader_bbk6750_66_n.bin
EMI : CNT : 0007
EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX | DEV : HBG4a2 : RAM : [ 4.00 GB ]
EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100525831344D42 : VEN : SAMSUNG | DEV : RX14MB : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR3 , ID : 150100525831424D42 : VEN : SAMSUNG | DEV : RX1BMB : RAM : [ 3.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524531424D42 : VEN : SAMSUNG | DEV : RE1BMB : RAM : [ 3.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100524331344D42 : VEN : SAMSUNG | DEV : RC14MB : RAM : [ 4.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00000000 [ 0 B ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 150100524836344D42058D85CE1224DB
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RH64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000

RNID : 771CFF265EECF9D3BAC03EA417B1092D

DA : USB : FULL-SPEED

Boot done!

SEC Data :
IMEI[0] : XXXXXXXXXXXXXXX
IMEI[1] : XXXXXXXXXXXXXXX
IMEI[2] : XXXXXXXXXXXXXXX

NVRAM check : Passed!

NVM saved as : MT6755__eMMC__XXXXXXXXXXXXXXX.mt_sec
NVM saved to : G:\VIVO BACKUP\

Done!
Elapsed: 00:00:56

Reconnect Power/Cable!

Operation : Reset Settings/Format FS [ v2.00 r3 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM31)
MODE : BOOTROM
PORT : 31
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BOOTROM
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6755
EMI : SRC : preloader_bbk6750_66_n.bin
EMI : CNT : 0007
EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX | DEV : HBG4a2 : RAM : [ 4.00 GB ]
EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100525831344D42 : VEN : SAMSUNG | DEV : RX14MB : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR3 , ID : 150100525831424D42 : VEN : SAMSUNG | DEV : RX1BMB : RAM : [ 3.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524531424D42 : VEN : SAMSUNG | DEV : RE1BMB : RAM : [ 3.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100524331344D42 : VEN : SAMSUNG | DEV : RC14MB : RAM : [ 4.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00000000 [ 0 B ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 150100524836344D42058D85CE1224DB
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RH64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000

RNID : 771CFF265EECF9D3BAC03EA417B1092D

DA : USB : FULL-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : CACHE

Done!
Elapsed: 00:00:23

Reconnect Power/Cable!


THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following User Says Thank You to gracy_elec For This Useful Post:
Old 05-25-2018, 15:22   #40 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,966
Member: 118520
Status: Offline
Thanks Meter: 3,240
Smile OPPO F1S A1601 MT6755 PATTERN & FRP REMOVE Done

SUCCESSFULLY REMOVE PATTERN & FRP(OPPO F1S A1601)USB


Operation : Identify [ v2.00 r3 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 90014A484247346132A4283AA9DA73F3
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 94DBD2D59BA82D14594090C62C708A56

DA : USB : FULL-SPEED

Boot done!

Product Model : A1601
Product Brand : OPPO
Product Name : A1601
Product Device : A1601
Product Board : full_oppo6750_15331
Product Info : oppo6750_15331
SW Version : A.35
SW OTA Version : A1601EX_11.A.35_INT_035_201801141630
SW OTA Name : A1601EX_11_A.35_180114
Display ID : A1601EX_11_A.35_180114
Kernel Info : 3.10.72-G201801141630
Product Model : A1601
Product Brand : OPPO
Product Name : A1601
Product Device : A1601
Product Board : full_oppo6750_15331
Product Info : oppo6750_15331
SW Version : A.35
SW OTA Version : A1601EX_11.A.35_INT_035_201801141630
SW OTA Name : A1601EX_11_A.35_180114
Display ID : A1601EX_11_A.35_180114
Kernel Info : 3.10.72-G201801141630
Patch Level : LMY47I
Ver. CodeName : REL
Ver. Release : 5.1
Sec. Patch : 2018-01-05
Build Time : 1515920787
Product Manfct : OPPO
Board Platform : mt6750
Product Model : A1601
Product Brand : OPPO
Product Name : A1601
Product Device : A1601
Product Board : full_oppo6750_15331
Product Info : oppo6750_15331
SW Version : A.35
SW OTA Version : A1601EX_11.A.35_INT_035_201801141630
SW OTA Name : A1601EX_11_A.35_180114
Display ID : A1601EX_11_A.35_180114
Kernel Info : 3.10.72-G201801141630


IMEI[0] : XXXXXXXXXXXXXXX
IMEI[1] : XXXXXXXXXXXXXXX
NVRAM check : Passed!

Done!
Elapsed: 00:00:16

Operation : Reset Settings/Format FS [ v2.00 r3 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 90014A484247346132A4283AA9DA73F3
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 94DBD2D59BA82D14594090C62C708A56

DA : USB : FULL-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:25

Reconnect Power/Cable!


THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following User Says Thank You to gracy_elec For This Useful Post:
Old 05-26-2018, 11:10   #41 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,966
Member: 118520
Status: Offline
Thanks Meter: 3,240
Smile MOTO M XT1663 MT6755 NO IMEI AND NVRAM EMPTY REPAIR Done

SUCCESSFULLY REPAIR NO IMEI AND NVRAM EMPTY(MOTO M XT1663 MT6755)USB


Operation : Identify [ v2.00 r3 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM31)
MODE : BOOTROM
PORT : 31
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: 150100524331344D42076C1ED852C369
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RC14MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : B4AD40F7D047548100986D4C8D325B7

DA : USB : FULL-SPEED

Boot done!

Patch Level : NRD90M
Display ID : XT1663_S373_180208_ROW
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2018-02-05
Build Time : 1518071182
Product Model : XT1663
Product Brand : motorola
Product Name : kungfu_row
Product Device : XT1663
Product Manfct : motorola
Board Platform : mt6755
Product Info : XT1663

NVRAM check : Failed! NVRAM empty!

Done!
Elapsed: 00:00:14

Operation : Write Security [ v2.00 r3 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM31)
MODE : BOOTROM
PORT : 31
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: 150100524331344D42076C1ED852C369
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RC14MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : B4AD40F7D047548100986D4C8D325B7

DA : USB : FULL-SPEED

Boot done!

Restore NVRAM from : MT6755__eMMC__XXXXXXXXXXXXXXX.mt_sec
NVRAM restored!


Done!
Elapsed: 00:02:45

Reconnect Power/Cable!

Operation : Identify [ v2.00 r3 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM25)
MODE : PRELOADER PORT
PORT : 25
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: 150100524331344D42076C1ED852C369
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RC14MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : B4AD40F7D047548100986D4C8D325B7

DA : USB : HIGH-SPEED

Boot done!

Patch Level : NRD90M
Display ID : XT1663_S373_180208_ROW
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2018-02-05
Build Time : 1518071182
Product Model : XT1663
Product Brand : motorola
Product Name : kungfu_row
Product Device : XT1663
Product Manfct : motorola
Board Platform : mt6755
Product Info : XT1663

IMEI[0] : XXXXXXXXXXXXXXX
IMEI[1] : XXXXXXXXXXXXXXX
NVRAM check : Passed!


Done!
Elapsed: 00:00:10

Operation : Repair Security [ v2.00 r3 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM25)
MODE : PRELOADER PORT
PORT : 25
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: 150100524331344D42076C1ED852C369
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RC14MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : B4AD40F7D047548100986D4C8D325B7

DA : USB : HIGH-SPEED

Boot done!

Old Data :
IMEI[0] : XXXXXXXXXXXXXXX
IMEI[1] : XXXXXXXXXXXXXXX
NVRAM check : Passed!

New Data :
IMEI[0] : XXXXXXXXXXXXXXX
IMEI[1] : XXXXXXXXXXXXXXX

NVM_LID : updated!

Update NVRAM ...
Update dependencies ...

Done!
Elapsed: 00:00:22

Reconnect Power/Cable!


THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following 3 Users Say Thank You to gracy_elec For This Useful Post:
Show/Hide list of the thanked
Old 05-28-2018, 13:43   #42 (permalink)
Junior Member
 
Join Date: Jul 2017
Location: malaysia
Posts: 36
Member: 2734527
Status: Offline
Thanks Meter: 1
Operation : Identify [ v2.00 r3 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO20.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00007017 : DA SEND ERROR!
ERROR : SECURE BOOT : SLA REQUIRED IN BROM MODE!
INFO : BROM Level : CERT/AUTH required! Try boot device in PRELOADER mode with select PL/PL_CRYPTO type!

Error : Fail to init protocol!
Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

sir is what happen any wrong plese help
  Reply With Quote
Old 05-28-2018, 13:52   #43 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,966
Member: 118520
Status: Offline
Thanks Meter: 3,240
HELLO @forutele; WHICH PHONE YOU R TRYING YOU ONLY POST LOG NOT POST PHONE MODEL

GOOD LUCK
  Reply With Quote
Old 05-28-2018, 14:25   #44 (permalink)
Junior Member
 
Join Date: Jul 2017
Location: malaysia
Posts: 36
Member: 2734527
Status: Offline
Thanks Meter: 1
Quote:
Originally Posted by gracy_elec View Post
HELLO @forutele; WHICH PHONE YOU R TRYING YOU ONLY POST LOG NOT POST PHONE MODEL

GOOD LUCK
haha sorry sir
model is vivo v5s
regard
  Reply With Quote
Old 05-28-2018, 14:33   #45 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,966
Member: 118520
Status: Offline
Thanks Meter: 3,240
HELLO @forutele;read my post #39
1)read info
2)backup firmware
3)after that you can use other option

goo luck
  Reply With Quote
The Following 2 Users Say Thank You to gracy_elec For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 12:48.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.69697 seconds with 8 queries

SEO by vBSEO