CM2MTK v1.33 - MTK Smart Anti-Virus , New Level of DataDirect [Pre-release Test] - GSM-Forum

JayDi · 10-11-2015, 07:15

Hi, seems as some guys can't find link in main thread about it and attack my pm

While monkeys trying delete themself by adb scripts, which they call world-first, we just made real AV

Full changeLog :

Quote:

Chinese Miracle-2 MTK/Mediatek v1.33 - MTK Smart Anti-Virus , New Level of DataDirect

MTK SP/FP Platform

- New feature supported : Smart AV - World First and Unique!
Allow : Erase all KNOWN and UNKNOWN YET viruses, which can inject their code in Android system (Monkey Tes,Time Service and much others)
NOT Require : ADB , USB Debug, Root , Power on also not required
Result : ALL VIRUSES, THEIR DAEMONS, ACTIVE SERVICES, SHELL SCRIPTS, RECOVERY SCRIPTS will be REMOVED permanently.
Side Effect : For some type of viruses after remove - mobile will not be affected by those one!
Side Effect : Can REMOVE Root or Root Manager (SuperSu) in some cases!
Required after virus remove make "FULL FACTORY RESET". All USER DATA will be DELETED! Backup it before operation!
Emergency requirement : If FW for target phone not available - MAKE FW READ BEFORE and mark it as "INFECTED_MTxxx_...." !

Supported Platforms :
SP : MT6571/MT6572/MT6575/MT6577/MT6580/MT6582/MT6589/MT6592/MT6595/MT6732/MT6735/MT6752/MT6753/MT6795/MT87xx/MT83xx with eMMC

- DataDirect : New feature - Recovery Gallery! - World First and Unique!
Allow DIRECTLY Recover User Photos , Pictures
Allow DIRECTLY Recover User Recordings
Allow DIRECTLY Recover User Video records
Tested with recovery files up to 2 GiB per file!

Supported Platforms :
SP : MT6571/MT6572/MT6575/MT6577/MT6580/MT6582/MT6589/MT6592/MT6595/MT6732/MT6735/MT6752/MT6753/MT6795/MT87xx/MT83xx with eMMC
FP : MT625A,MT6260,MT6261

NOTE : Feature NOT intended to recovery "garbage" content, like music and etc.

About DataDirect feature:
Feature allow recover UserData from damaged/hang/semi-dead MTK Phones and SmartPhones WITHOUT need even power on it!
- Internet connection IS NOT required - all data is private and safe.
- USB Debug/Root etc. IS NOT required - forget about root and rest stuff.
- Alive/working phone/Meta mode etc. IS NOT required
Phone can be completely dead (can not be Powered-On)
If phone can Boot and is not erased - data will be recovered
- Its not required to read our tons dumps and waste 20..200 minutes to read dump
Use any sw to extract something from dump, then ... then .. then ... Just ONE CLICK , 10-40 seconds and you got a result!

- UserData operations improved
PhoneBook Reading improved on SP platform - some older Android versions supported
PhoneBook Reading improved on FP platform - more types supported , autodetection improved

- Firmware reading improved
Brand-specific improvements
Autodetection improved
FP Firmware verification improved , more types supported
Supported Platforms for Factory FW Reading:
MT6571/MT6572/MT6575/MT6577/MT6580/MT6582/MT6589/MT6592/MT6595/MT6732/MT6735/MT6752/MT6753/MT6795/MT87xx/MT83xx with eMMC
MT625A/MT6260/MT6261 with SF/NOR

- Other
FlashID database updated
Some bugfixes and improvements
Much internal changes in different operations

Download: CM2MTK_v133_fx - Download - 4shared
Inside link to EXE only ( EXE ONLY! - mean you MUST change old one with this! )
On link also you can find some Proof-Of and tests reposrts as well.

Version is initial, more features and improvements already on way.

Abid Hussain · 10-11-2015, 07:26

Hi Sir,

When We Try To Use This Exe For Smart AV EXE Close Itself

Any Help Regarding This Issue ?

JayDi · 10-11-2015, 07:37

Quote:

Originally Posted by Abid Hussain

Hi Sir,

When We Try To Use This Exe For Smart AV EXE Close Itself

Any Help Regarding This Issue ?

It says me nothing. Where is log? Log stored in CM2MTK/Operation.log

Abid Hussain · 10-11-2015, 07:42

Here The Log Sir (Please Check)

Code:

Start  at : [10/11/2015 / 11:12:29 AM]
Operation : Check / Read Info [ v1.33 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 214 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4838473264040500A2E81A322D
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d2G8
[eMMC] : FLASH_CID : 90014A4838473264040500A2E81A322D
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : LINQ
ProdName  : J220_QMobile
ProdModel : LINQ X70
Device    : J220_QMobile
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.10

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!

Finish at : [10/11/2015 / 11:12:40 AM]

Start  at : [10/11/2015 / 11:12:54 AM]
Operation : Format FileSystem [ v1.33 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 214 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4838473264040500A2E81A322D
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d2G8
[eMMC] : FLASH_CID : 90014A4838473264040500A2E81A322D
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:20
Reconnect Power/Cable!

Finish at : [10/11/2015 / 11:13:15 AM]

Start  at : [10/11/2015 / 11:13:38 AM]
Operation : Remove Viruses [SmartAV] [ v1.33 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 214 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4838473264040500A2E81A322D
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d2G8
[eMMC] : FLASH_CID : 90014A4838473264040500A2E81A322D
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

SmartAV Init Ok!
Scanning FileSystem now , please wait

JayDi · 10-11-2015, 07:56

Thanks for the log. In near 30 minutes will be fixed version.

sanyomobile · 10-11-2015, 09:01

give me download link please i have opp0 r831k

Brand : OPPO
ProdName : OPPO72_14079
ProdModel : R831K
Device : OPPO72_14079
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : R831K_11_A.14_150602

virus infected

rahihimkhan · 10-11-2015, 09:07

Quote:

Originally Posted by sanyomobile

give me download link please i have opp0 r831k

Brand : OPPO
ProdName : OPPO72_14079
ProdModel : R831K
Device : OPPO72_14079
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : R831K_11_A.14_150602

virus infected

wait update on the wey

rahihimkhan · 10-11-2015, 09:26

An other samsung GT I8552 mt6572 done with cm2

Wait for phone...
Phone found! [ 26 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E35585A4D4201B2C5D4298125
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D4201B2C5D4298125
[eMMC] : FLASH_EXT : 00400000/00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

SmartAV Init Ok!
Scanning FileSystem now , please wait
Scan Done, infected files found : 9
Removing infected files and scripts ...

SmartAV Report : Removed 9 infected files!

Making additional operations ...
Special Op #1 : Clear Recovery Data Ok!
Special Op #2 : PostFix Ok!

Done!

Done!
Elapsed: 00:00:28
Reconnect Power/Cable!

sneha · 10-11-2015, 09:26

Code:

Chinese Miracle II  [MTK module] v 1.33

Operation : Remove Viruses [SmartAV] [ v1.33 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 60 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004B3758564D420116DAC621416D
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D420116DAC621416D
[eMMC] : FLASH_EXT : 00400000/00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

SmartAV Init Ok!
Scanning FileSystem now , please wait
Scan Done, infected files found : 23
Removing infected files and scripts ... 

SmartAV Report : Removed 23 infected files!

Making additional operations ... 
Special Op #1 : Clear Recovery Data Ok!
Special Op #2 : PostFix Ok!

Done!

Done!
Elapsed: 00:00:48
Reconnect Power/Cable!


Operation : Format FileSystem [ v1.33 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 60 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004B3758564D420116DAC621416D
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D420116DAC621416D
[eMMC] : FLASH_EXT : 00400000/00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:19
Reconnect Power/Cable!

rahihimkhan · 10-11-2015, 10:30

samsung g7102 done with sm2

Operation : Remove Viruses [SmartAV] [ v1.33 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 26 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004B4A5330304D0300E135A611D7
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : M00SJ
[eMMC] : FLASH_CID : 1501004B4A5330304D0300E135A611D7
[eMMC] : FLASH_EXT : 00100000/00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

SmartAV Init Ok!
Scanning FileSystem now , please wait
Scan Done, infected files found : 27
Removing infected files and scripts ...

SmartAV Report : Removed 27 infected files!

Making additional operations ...
Special Op #1 : Clear Recovery Data Ok!
Special Op #2 : PostFix Ok!

Done!

Done!
Elapsed: 00:00:33
Reconnect Power/Cable!

mahi_mobile · 10-11-2015, 11:16

plz upted tool setup 1.33 bro

nori2007 · 10-11-2015, 11:18

CM2MTK_v133_EXE_Only.rar' is unavailable.This file was deleted.

mahi_mobile · 10-11-2015, 11:19

ok thanks bro kab ayega ne setup bro

JayDi · 10-11-2015, 11:29

New link :
CM2MTK_v133_fx - Download - 4shared

Changed algo from "normal" to "deep scan" , now it can take UP TO MINUTE to verify all.
But it kill more viruses as well. Also, chance damage something in system exists.

Anyway - need test , my samples not enough for clear results.
Now it detect in my test samples more viruses and their daemons/sub. Detection ration up on 20-30% from previous version.

Code:

Operation : Remove Viruses [SmartAV] [ v1.33 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 11 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6592
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6592_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4838473264040506A11EA48107
DA Stat : v4.2 on BBID : 0x8A
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d2G8
[eMMC] : FLASH_CID : 90014A4838473264040506A11EA48107
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

SmartAV Init Ok!
Scanning FileSystem now , please wait
Scan Done, infected files found : 43
Removing infected files and scripts ... 

SmartAV Report : Removed 43 infected files!

Making additional operations ... 
Special Op #1 : Clear Recovery Data Ok!
Special Op #2 : PostFix Ok!

Done!

Done!
Elapsed: 00:01:26
Reconnect Power/Cable!

Code:

Operation : Format FileSystem [ v1.33 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 11 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6592
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6592_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4838473264040506A11EA48107
DA Stat : v4.2 on BBID : 0x8A
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d2G8
[eMMC] : FLASH_CID : 90014A4838473264040506A11EA48107
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:21
Reconnect Power/Cable!

Abid Hussain · 10-11-2015, 11:45

Done One Qmobile A900 With New Fixed Version

Code:

Operation : Remove Viruses [SmartAV] [ v1.33 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 214 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 504E01FE58585830ED5B1058DBB0182B
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 00FE , OEM : 014E
[eMMC] : FLASH_INF : XXXX0
[eMMC] : FLASH_CID : FE014E503058585858105BED2B18B0DB
[eMMC] : FLASH_EXT : 00100000/00100000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

SmartAV Init Ok!
Scanning FileSystem now , please wait
Scan Done, infected files found : 31
Removing infected files and scripts ... 

SmartAV Report : Removed 31 infected files!

Making additional operations ... 
Special Op #1 : Clear Recovery Data Ok!
Special Op #2 : PostFix Ok!

Done!

Done!
Elapsed: 00:00:53
Reconnect Power/Cable!


Operation : Format FileSystem [ v1.33 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 214 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 504E01FE58585830ED5B1058DBB0182B
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 00FE , OEM : 014E
[eMMC] : FLASH_INF : XXXX0
[eMMC] : FLASH_CID : FE014E503058585858105BED2B18B0DB
[eMMC] : FLASH_EXT : 00100000/00100000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:21
Reconnect Power/Cable!


Operation : Check / Read Info [ v1.33 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 214 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 504E01FE58585830ED5B1058DBB0182B
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 00FE , OEM : 014E
[eMMC] : FLASH_INF : XXXX0
[eMMC] : FLASH_CID : FE014E503058585858105BED2B18B0DB
[eMMC] : FLASH_EXT : 00100000/00100000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : QMobile
ProdName  : QMobile
ProdModel : A900
Device    : QMobile
AndroidVer: 4.2.1
MTKxCPU   : MT6589
MTKxPRJ   : ALPS.JB2.MP.V1.2

Done!
Elapsed: 00:00:06
Reconnect Power/Cable!

10-11-2015, 11:16	#11 (permalink)
mahi_mobile Freak Poster Join Date: Jun 2014 Posts: 249 Member: 2214243 Status: Offline Thanks Meter: 74	plz upted tool setup 1.33 bro plz upted tool setup 1.33 bro

10-11-2015, 07:26	#2 (permalink)
Abid Hussain Freak Poster Join Date: Jul 2006 Age: 38 Posts: 296 Member: 307225 Status: Offline Thanks Meter: 59	Hi Sir, When We Try To Use This Exe For Smart AV EXE Close Itself Any Help Regarding This Issue ?

10-11-2015, 07:56	#5 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Thanks for the log. In near 30 minutes will be fixed version.

10-11-2015, 09:01	#6 (permalink)
sanyomobile No Life Poster Join Date: Oct 2012 Posts: 1,436 Member: 1824929 Status: Offline Thanks Meter: 99	give me download link please i have opp0 r831k Brand : OPPO ProdName : OPPO72_14079 ProdModel : R831K Device : OPPO72_14079 AndroidVer: 4.2.2 MTKxCPU : MT6572 MTKxPRJ : R831K_11_A.14_150602 virus infected

10-11-2015, 09:26	#8 (permalink)
rahihimkhan No Life Poster Join Date: Oct 2007 Location: Dera Ismail Khan (KPK) Pak Posts: 2,544 Member: 613449 Status: Offline Sonork: 100.1614074 Thanks Meter: 634	An other samsung GT I8552 mt6572 done with cm2 Wait for phone... Phone found! [ 26 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6572 BB_CPU_HW : CA01 BB_CPU_SW : 8A00 BB_CPU_SB : 0000 BB_CPU_NM : [MediaTek] MT6572_S00 Processing BROM stage BLVersion : 0x01 SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Ver : MTK_AllInOne_DA_v7.1533.03 NAND_ID : 00000000000000000000000000000000 eMMC_ID : 1501004E35585A4D4201B2C5D4298125 DA Stat : v4.2 on BBID : 0x88 DA Sent. Configure setting now ... DA started successuflly eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0015 , OEM : 0100 [eMMC] : FLASH_INF : BMZX5 [eMMC] : FLASH_CID : 1501004E35585A4D4201B2C5D4298125 [eMMC] : FLASH_EXT : 00400000/00080000 [eMMC] : FLASH_LEN : 0x00000000E9000000 INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! SmartAV Init Ok! Scanning FileSystem now , please wait Scan Done, infected files found : 9 Removing infected files and scripts ... SmartAV Report : Removed 9 infected files! Making additional operations ... Special Op #1 : Clear Recovery Data Ok! Special Op #2 : PostFix Ok! Done! Done! Elapsed: 00:00:28 Reconnect Power/Cable!

10-11-2015, 10:30	#10 (permalink)
rahihimkhan No Life Poster Join Date: Oct 2007 Location: Dera Ismail Khan (KPK) Pak Posts: 2,544 Member: 613449 Status: Offline Sonork: 100.1614074 Thanks Meter: 634	samsung g7102 done with sm2 Operation : Remove Viruses [SmartAV] [ v1.33 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 26 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6582 BB_CPU_HW : CA01 BB_CPU_SW : 8A00 BB_CPU_SB : 0001 BB_CPU_NM : [MediaTek] MT6582_S00 Processing BROM stage SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Ver : MTK_AllInOne_DA_v7.1533.03 NAND_ID : 00000000000000000000000000000000 eMMC_ID : 1501004B4A5330304D0300E135A611D7 DA Stat : v4.2 on BBID : 0x87 DA Sent. Configure setting now ... DA started successuflly eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0015 , OEM : 0100 [eMMC] : FLASH_INF : M00SJ [eMMC] : FLASH_CID : 1501004B4A5330304D0300E135A611D7 [eMMC] : FLASH_EXT : 00100000/00020000 [eMMC] : FLASH_LEN : 0x00000000E9000000 INT RAM : 0x00020000 EXT RAM : 0x40000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! SmartAV Init Ok! Scanning FileSystem now , please wait Scan Done, infected files found : 27 Removing infected files and scripts ... SmartAV Report : Removed 27 infected files! Making additional operations ... Special Op #1 : Clear Recovery Data Ok! Special Op #2 : PostFix Ok! Done! Done! Elapsed: 00:00:33 Reconnect Power/Cable!

10-11-2015, 11:18	#12 (permalink)
nori2007 Freak Poster Join Date: Sep 2007 Location: algeria Age: 35 Posts: 469 Member: 580077 Status: Offline Sonork: 100.1591941 Thanks Meter: 207	CM2MTK_v133_EXE_Only.rar' is unavailable.This file was deleted.

10-11-2015, 11:19	#13 (permalink)
mahi_mobile Freak Poster Join Date: Jun 2014 Posts: 249 Member: 2214243 Status: Offline Thanks Meter: 74	ok thanks bro kab ayega ne setup bro