GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 06-03-2019, 16:55   #1 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Smile .::CM2SP2-UNISOC SUCCESS REPORT STARTs::.


SUCCESSFULLY TEAR FRP(INTEX AQUA FULVU E5 AND:7.0 SP9850KA)USB


Operation : Identify [ v2.00r1 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sedning Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : NRD90M
Display ID : INTEX_IP0518ND_INFIE_33_V08_INDIAN
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2018-08-05
Build Time : 1536032989
Product Model : INTEX AQUA FulVU e5
Product Brand : INTEX
Product Name : AQUA_FulVU_e5
Product Device : AQUA_FulVU_e5
Product Board : sp9850ka_1h10
Product Manfct : INTEX
Board Platform : sp9850ka
Product Info : INTEX_AQUA_FulVU_e5

UserData : STATE : DAMAGED



Done!
Elapsed: 00:00:30

Operation : Format FS / Reset Settings [ v2.00r1 ]

Mode : Reset FRP

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sedning Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!


Done!
Elapsed: 00:00:27


THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following 5 Users Say Thank You to gracy_elec For This Useful Post:
Show/Hide list of the thanked
Old 06-03-2019, 17:03   #2 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Smile MOBICEL ASTRO AND:8.1.0 SP7731E TEAR PATTERN & FRP Done

SUCCESSFULLY TEAR PATTERN & FRP(MOBICEL ASTRO AND:8.1.0 SP7731E)USB


Operation : Identify [ v2.00r1 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sedning Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : OPM2.171019.012
Display ID : OPM2.171019.012 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-04-05
Build Time : 1528971470
Product Info : k101
Product Model : ASTRO
Product Brand : Mobicel
Product Name : ASTRO
Product Device : ASTRO
Product Manfct : Mobicel
Product Board : k101
Board Platform : sp7731e

UserData : STATE : DAMAGED



Done!
Elapsed: 00:00:54

Operation : Format FS / Reset Settings [ v2.00r1 ]

Mode : Default [ Reset Settings + FRP ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sedning Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP


Reconnect Power/Cable!


Done!
Elapsed: 00:00:42


THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following 4 Users Say Thank You to gracy_elec For This Useful Post:
Show/Hide list of the thanked
Old 06-03-2019, 17:09   #3 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Smile ZEN ADMIRE SENSE AND:7.0 SC8830 TEAR USER LOCK Done

SUCCESSFULLY TEAR USER LOCK(ZEN ADMIRE SENSE AND:7.0 SC8830)USB


Operation : Identify [ v2.00r1 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sedning Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : NRD90M
Display ID : ZEN_Admire_Sense_Software_V12_21102017
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2017-09-05
Build Time : 1508558596
Product Model : ZEN ADMIRE SENSE
Product Brand : ZEN
Product Name : ZEN_ADMIRE_SENSE
Product Device : ZEN_ADMIRE_SENSE
Product Board : ZEN
Product Manfct : ZEN
Board Platform : sc8830
Product Info : ZEN_ADMIRE_SENSE

UserData : STATE : DAMAGED



Done!
Elapsed: 00:00:31

Operation : Format FS / Reset Settings [ v2.00r1 ]

Mode : Reset Settings [ Format FS ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sedning Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache


Reconnect Power/Cable!


Done!
Elapsed: 00:00:35


THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following 4 Users Say Thank You to gracy_elec For This Useful Post:
Show/Hide list of the thanked
Old 06-03-2019, 17:21   #4 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Smile KARBONN PLATINUM P9 AND:8.1.0 SP9832E TEAR FRP Done

SUCCESSFULLY TEAR FRP(KARBONN PLATINUM P9 AND:8.1.0 SP9832E)USB


Operation : Identify [ v2.00r1 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sedning Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : OPM2.171019.012
Display ID : UTLPlatinum P9v1009_18-09-2018
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-08-05
Build Time : 1537273856
Product Model : Platinum P9
Product Brand : Karbonn
Product Name : Platinum_P9
Product Device : Platinum_P9
Product Manfct : Karbonn
Product Info : Platinum P9
Board Platform : sp9832e

UserData : STATE : ENCRYPTION



Done!
Elapsed: 00:00:55


Operation : Format FS / Reset Settings [ v2.00r1 ]

Mode : Reset FRP

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sedning Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!


Done!
Elapsed: 00:00:23


THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following 5 Users Say Thank You to gracy_elec For This Useful Post:
Show/Hide list of the thanked
Old 06-05-2019, 08:23   #5 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Smile LYF-F61F AND:6.0 SC9820A TEAR USER LOCK Done

SUCCESSFULLY TEAR USER LOCK(LYF-F61F AND:6.0 SC9820A)USB


Operation : Identify [ v2.00r1 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sedning Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : LYF-F61F-000-02-08-010319
Display ID : LYF-F61F-000-02-08-010319
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2019-03-01
Build Time : 1551437864
Product Model : F61F
Product Brand : SPRD
Product Name : sp9820a_5c20
Product Device : sp9820a_5c20
Product Board : sp9820a_5c20
Product Manfct : SPRD
Board Platform : sc8830
Product Info : sp9820a_5c20
Product Model : F61F

UserData : STATE : DAMAGED



Done!
Elapsed: 00:00:48

Operation : Format FS / Reset Settings [ v2.00r1 ]

Mode : Default [ Reset Settings + FRP ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sedning Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP


Reconnect Power/Cable!


Done!
Elapsed: 00:00:43


THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following 2 Users Say Thank You to gracy_elec For This Useful Post:
Old 06-05-2019, 08:36   #6 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Smile LEPHONE W2 AND:6.0 SC9832A TEAR PATTERN & FRP Done

SUCCESSFULLY TEAR PATTER & FRP(LEPHONE W2 AND:6.0 SC9832A)USB


Operation : Identify [ v2.00r1 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sedning Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : MRA58K
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2016-11-06
Build Time : 1499957526
Product Board : sp9832a_3h10_volte
Board Platform : sc8830
Product Info : sp9832a_3h10_volte
Display ID : lephoneW2_India_V1.8
Product Model : lephone_W2
Product Model : lephone W2
Product Device : lephone_W2
Product Name : lephone
Product Brand : lephone
Product Manfct : lephone
Product Model : DFSL_BLF_PW2H_OE

UserData : STATE : DAMAGED



Done!
Elapsed: 00:00:32



Operation : Format FS / Reset Settings [ v2.00r1 ]

Mode : Default [ Reset Settings + FRP ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sedning Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP


Reconnect Power/Cable!


Done!
Elapsed: 00:00:45


THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following 2 Users Say Thank You to gracy_elec For This Useful Post:
Old 06-05-2019, 08:44   #7 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Smile INTEX AQUA LIONS 4G AND:6.0 SC9832A TEAR HANG ON LOGO Done

SUCCESSFULLY TEAR HANG ON LOGO(INTEX AQUA LIONS 4G AND:6.0 SC9832A)USB


Operation : Identify [ v2.00r1 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sedning Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : MRA58K
Display ID : INTEX_AQUA_LIONS_4G_V08_Indian_SER
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2017-01-05
Build Time : 1487606400
Product Model : INTEX AQUA LIONS 4G
Product Brand : INTEX
Product Name : INTEX_AQUA_LIONS_4G
Product Device : INTEX_AQUA_LIONS_4G
Product Board : INTEX
Product Manfct : INTEX
Board Platform : sc8830
Product Info : INTEX AQUA LIONS 4G

UserData : STATE : DAMAGED



Done!
Elapsed: 00:00:39

Operation : Format FS / Reset Settings [ v2.00r1 ]

Mode : Default [ Reset Settings + FRP ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sedning Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP


Reconnect Power/Cable!


Done!
Elapsed: 00:00:34


THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following 2 Users Say Thank You to gracy_elec For This Useful Post:
Old 06-07-2019, 11:25   #8 (permalink)
Freak Poster
 
Join Date: Aug 2013
Posts: 463
Member: 2006990
Status: Offline
Thanks Meter: 393
Prestigio PSP3507 Pin and FRP Reset

Card found : 7D988D65 , v0137
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.00r1


Operation : Identify [ v2.00r1 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sedning Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : MRA58K
Display ID : PSP3527DUO.20161101.1.0.04
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2016-10-05
Build Time : 1477967089
Product Model : PSP3527DUO
Product Brand : Prestigio
Product Name : PSP3527DUO
Product Device : TE50B6G
Product Board : SC7731C
Product Manfct : Prestigio
Board Platform : sc8830
Product Info : PSP3527DUO

UserData : STATE : DAMAGED



Done!
Elapsed: 00:00:49

Operation : Format FS / Reset Settings [ v2.00r1 ]

Mode : Default [ Reset Settings + FRP ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sedning Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP


Reconnect Power/Cable!


Done!
Elapsed: 00:00:32
  Reply With Quote
The Following 2 Users Say Thank You to Surtax For This Useful Post:
Old 06-07-2019, 11:26   #9 (permalink)
Freak Poster
 
Join Date: Aug 2013
Posts: 463
Member: 2006990
Status: Offline
Thanks Meter: 393
Irbis SP20 RESET FRP

Operation : Identify [ v2.00r1 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sedning Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : MRA58K
Display ID : IRBIS_SP20_v.05
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2016-10-05
Build Time : 1479802499
Product Model : SP20
Product Brand : IRBIS
Product Name : SP20
Product Device : SP20
Product Board : SP20
Product Manfct : IRBIS
Board Platform : sc8830
Product Info : SP20

UserData : STATE : DAMAGED


Done!
Elapsed: 00:00:32

Operation : Format FS / Reset Settings [ v2.00r1 ]

Mode : Reset FRP
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sedning Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!


Done!
  Reply With Quote
The Following 2 Users Say Thank You to Surtax For This Useful Post:
Old 06-15-2019, 16:54   #10 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Smile LYF-F81E AND:6.0 SC8830 TEAR HANG ON LOGO Done

SUCCESSFULLY TEAR HANG ON LOGO(LYF-F81E AND:6.0 SC8830)USB


Operation : Identify [ v2.00r2 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : LYF : F81E
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : MRA58K
Display ID : LYF-F81E-000-02-08-040319
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2019-03-01
Build Time : 1551692936
Product Model : F81E
Product Brand : LYF
Product Name : F81E
Product Device : w203_kew_211
Product Board : w203_kew_211
Product Manfct : SPRD
Board Platform : sc8830
Product Info : w203_kew_211

UserData : STATE : ENCRYPTION



Done!
Elapsed: 00:00:41

Operation : Format FS / Reset Settings [ v2.00r2 ]
Mode : Default [ Reset Settings + FRP ]


1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : LYF : F81E
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP


Reconnect Power/Cable!


Done!
Elapsed: 00:00:30[AFTER THIS YOUR PHONE WILL STUCK ON BLUE SCREAN NOT TO WORRY NEXT PROCESS AS FOLLOW]

Operation : Format FS / Reset Settings [ v2.00r2 ]
Mode : Forced [ Format FS / Fix ]


1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : LYF : F81E
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : Forced Wipe
Wipe Ok : Forced Wipe


Reconnect Power/Cable!


Done!
Elapsed: 00:00:30


THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following User Says Thank You to gracy_elec For This Useful Post:
Old 06-24-2019, 10:11   #11 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Smile MICROMAX Q402 AND:6.0 SP9832A TEAR HANG ON LOGO Done

SUCCESSFULLY TEAR HANG ON LOGO(MICROMAX Q402 AND:6.0 SP9832A)USB


Operation : Identify [ v2.00r2 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Micromax : Micromax Q402
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : MRA58K
Display ID : MMX_Q402_SW_V14_HW_V2.0_20170804
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2017-07-05
Build Time : 1516345799
Product Model : Micromax Q402
Product Brand : Micromax
Product Name : Q402
Product Device : Q402
Product Board : sp9832a_2h11_volte
Product Manfct : Micromax
Board Platform : sc8830
Product Info : Q402

UserData : STATE : PLAIN



Done!
Elapsed: 00:00:37

Operation : Format FS / Reset Settings [ v2.00r2 ]
Mode : Default [ Reset Settings + FRP ]


1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Micromax : Micromax Q402
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP


Reconnect Power/Cable!


Done!
Elapsed: 00:00:28


THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following User Says Thank You to gracy_elec For This Useful Post:
Old 07-01-2019, 11:02   #12 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Smile LYF F41T AND:6.0 SP9820A TEAR HANG ON LOGO Done

SUCCESSFULLY TEAR HANG ON LOGO(LYF F41T AND:6.0 SP9820A)USB


Operation : Identify [ v2.00r2 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : LYF : F41T
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : MRA58K
Display ID : LYF-F41T-000-02-06-040319
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2019-03-01
Build Time : 1551673757
Product Model : F41T
Product Brand : LYF
Product Name : F41T
Product Device : sp9820a_5c20
Product Board : sp9820a_5c20
Product Manfct : Techain
Board Platform : sc8830
Product Info : sp9820a_5c20

UserData : STATE : ENCRYPTION



Done!
Elapsed: 00:00:38

Operation : Format FS / Reset Settings [ v2.00r2 ]
Mode : Default [ Reset Settings + FRP ]


1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : LYF : F41T
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP


Reconnect Power/Cable![AFTER THIS YOUR PHONE WILL STUCK ON BLUE SCREAN NOT TO WORRY NEXT PROCESS AS FOLLOW]


Done!
Elapsed: 00:00:36

Operation : Format FS / Reset Settings [ v2.00r2 ]
Mode : Forced [ Format FS / Fix ]


1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : LYF : F41T
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : Forced Wipe
Wipe Ok : Forced Wipe


Reconnect Power/Cable!


Done!
Elapsed: 00:00:30


THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following User Says Thank You to gracy_elec For This Useful Post:
Old 07-05-2019, 08:40   #13 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Smile LEPHONE W2 AND:6.0 SC9832A TEAR HANG ON LOGO Done

SUCCESSFULLY TEAR HANG ON LOGO(LEPHONE W2 AND:6.0 SC9832A)USB


Operation : Identify [ v2.00r2 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : lephone : lephone_W2
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : MRA58K
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2018-08-05
Build Time : 1543402284
Product Board : sp9832a_3h10_volte
Board Platform : sc8830
Product Info : sp9832a_3h10_volte
Display ID : lephoneW2_India_V2.2
Product Model : lephone_W2
Product Model : lephone W2
Product Device : lephone_W2b
Product Name : lephone
Product Brand : lephone
Product Manfct : lephone
Product Model : DFSL_BLF_PW2HB_OE

UserData : STATE : PLAIN



Done!
Elapsed: 00:00:41

Operation : Format FS / Reset Settings [ v2.00r2 ]
Mode : Default [ Reset Settings + FRP ]


1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : lephone : lephone_W2
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP


Reconnect Power/Cable!


Done!
Elapsed: 00:00:35


THANKS INFINITY-BOX TEAM
  Reply With Quote
Old 07-05-2019, 08:48   #14 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,965
Member: 118520
Status: Offline
Thanks Meter: 3,240
Smile LYF F271I AND:6.0 SP9820E TEAR USER LOCK Done

SUCCESSFULLY TEAR USER LOCK(LYF F271I AND:6.0 SP9820E)USB


Operation : Identify [ v2.00r2 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : LYF : F271i
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : MRA58K
Display ID : MRA58K release-keys
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2016-07-01
Build Time : 1551701753
Product Model : F271i
Product Brand : LYF
Product Name : F271i
Product Device : F271i
Product Board : F271i
Product Manfct : Chino-E
Board Platform : sp9820e
Product Info : F271i

SecInfo :
IMEI[1] : XXXXXXXXXXXXXX
IMEI[2] : XXXXXXXXXXXXXX
IMEI[3] : XXXXXXXXXXXXXX
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SIMLOCK : SignedType

UserData : STATE : PLAIN



Done!
Elapsed: 00:00:56

Operation : Format FS / Reset Settings [ v2.00r2 ]
Mode : Default [ Reset Settings + FRP ]


1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : LYF : F271i
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP


Reconnect Power/Cable!


Done!
Elapsed: 00:00:24


THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following User Says Thank You to gracy_elec For This Useful Post:
Old 07-05-2019, 18:53   #15 (permalink)
Freak Poster
 
sajidi1984's Avatar
 
Join Date: Nov 2017
Posts: 246
Member: 2778467
Status: Offline
Thanks Meter: 136
Qmobile I6 Metal 2018 Format+Frp Done


Operation : Format FS / Reset Settings [ v2.00r2 ]
Mode : Default [ Reset Settings + FRP ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP
  Reply With Quote
The Following 2 Users Say Thank You to sajidi1984 For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 01:32.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.29080 seconds with 7 queries

SEO by vBSEO