CM2SPD: QMobile i5i 2018 not supported!

[fahadboss]

Hello Infinity Team!

QMobile i5i 2018 is 8.1.0 Go edition phone which is not supported in SPD module. Please add it.

Here is info readed with AST module in ADB mode.

Card found : 25C99553 , v0136
Infinity-Box Android Service Tool [AST] v1.03

Operation : Identify (ADB) [ v1.03 ]
 
Waiting for device in ADB mode ... 
 
1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!
 
Connect Ok!
 
Device Info: 
Vendor		:	QMobile
Model		:	QMobile i5i 2018
Device		:	i5i_2018
Android		:	8.1.0
Product		:	i5i 2018
Brand		:	QMobile
Serial		:	JZ391832005504
Build_tm	:	Tue Jul 24 11:26:17 CST 2018
DisplayID	:	OPM2.171019.012 release-keys
Patch Ver	:	OPM2.171019.012
SecPatch	:	2018-07-05
Hardware	:	k121
HW Board	:	i5i-2018
CPU rel		:	armeabi-v7a
SIM Card	:	ABSENT,ABSENT
BaseBand	:	FM_BASE_17C_W18.21.1_P2|sc7731e_modem|06-07-2018 16:54:31
BaseBand	:	FM_BASE_17C_W18.21.1_P2|sc7731e_modem|06-07-2018 16:54:31
RIL ver		:	android reference-ril 1.0
USB Conf	:	ptp,adb
Sys USB		:	ptp,adb
FS Crypt	:	unencrypted

Done!
Elapsed: 00:00:16

Here is Official Product page.

Thanks in advance.

[abubakarashraf]

working%
https://www.youtube.com/watch?v=VGABXg4lPh0

[fahadboss]

Originally Posted by abubakarashraf

working%
https://www.youtube.com/watch?v=VGABXg4lPh0

I had done it myself.
I just posted here so CM2 will take a look into it.

[PASSIONATE_BOYS]

Hello,
Make Identify with CM2SP2 latest version and post result here with appropriate boot.

Br.
Infinity-Box Team.

[Oppo_Tool]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : OPM2.171019.012
Display ID : OPM2.171019.012 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-07-05
Build Time : 1532402777
Product Model : QMobile i5i 2018
Product Info : i5i 2018
Product Brand : QMobile
Product Name : i5i_2018
Product Device : i5i_2018
Product Model : i5i 2018
Product Model : I5I2018
Product Manfct : QMobile
Product Board : i5i-2018
Board Platform : sp7731e

VlnrLevel : 0x00

SP7731E__QMobile__I5I2018__8.1.0__OPM2.171019.012_ _i5i_2018

Read : prodnv.img
ExtSparse : Compression ratio : 19%
Read : miscdata.bin
Read : recovery.img
Read : tos.bin
Read : sml.bin
Read : u-boot.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : nvitem_w.bin
Make : persist.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : modem_wcn.img
Read : modem_w.bin
Read : deltanv_w.bin
Read : gdsp_w.bin
Read : pm_sys.bin
Read : boot.img
Read : system.img
ExtSparse : Compression ratio : 86%
Make : cache.img
Read : vendor.img
ExtSparse : Compression ratio : 49%
Read : vbmeta.img
Make : userdata.img
Read : u-boot-spl.bin

Android Info saved : _Android_info.txt
Reconnect Power/Cable!

Done!
Elapsed: 00:31:48

[fahadboss]

I know this model is supported now.
Please note that this topic is from March 2019 and CM2SP2 released in May 2019.

Thank you!