Condor plume l1 unknow data

[dadarko]

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 4500017045434148FD1E0141CFC51523
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , AECAH
[eMMC] : FLASH_CID : 700100454841434541011EFD231593CF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A5000000
[eMMC] : FLASH_UCP : 14928 MiB [eMMC 16 GiB]
DEV RID : 0x0D434F4DB7755E83F0EB882613E371B8
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : Condor
ProdName : SP622
ProdModel : Plume L1
Device : SP622
AndroidVer: 7.0
MTKxCPU : MT6737M
MTKxPRJ : SP622_V6

SECURITY :
IMEI_SW [1] : 3526340XXXXXX
IMEI_SW [2] : 3526340XXXXXX
BTMAC Addr : 1B23XXXXXXXX
WiFi MAC : 1C23XXXXXXXX

Done!
Elapsed: 00:00:07
Reconnect Power/Cable!

************************************************** ***************
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 4500017045434148FD1E0141CFC51523
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , AECAH
[eMMC] : FLASH_CID : 700100454841434541011EFD231593CF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A5000000
[eMMC] : FLASH_UCP : 14928 MiB [eMMC 16 GiB]
DEV RID : 0x0D434F4DB7755E83F0EB882613E371B8
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : Condor
ProdName : SP622
ProdModel : Plume L1
Device : SP622
AndroidVer: 7.0
MTKxCPU : MT6737M
MTKxPRJ : SP622_V6

[Read Ok] : preloader_t856be_v1_g_js_lx5501_hd.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Stop] : Unknow data!
Make next steps :
1. Use WinRar or 7zip and rar this folder : MT6737M__Condor__Plume_L1__SP622__7.0__SP622_V6
2. Send this archive with title "FWFACT" to [email protected]

Read error

Operation Failed
Elapsed: 00:00:51
Reconnect Power/Cable!

***********************************************


email with 7zip file of this folder sended to : [email protected]