coolsend cpu not done
 

Operation : Format File System
Settings : SmartFormat is On

Waiting phone ...
Connect battery, press and hold '0' button
Connect USB cable and keep hold button, until phone will be detected
Init : CECCCCCC
Settings registers ...
1st boot Ok
==== CPU
CPU_ID : 0809 , rev : 0007
CPU_CN :
==== FLASH
FL_VEN : 0000 , rev : 0000
FL_CNM :
FL_CAP : 00000000
Initial : 81C0024C
==== Booting
Sending RamRun Loader ...
Set : 0809 , 00000000
Boot File Not Found! CPU not Supported , or BootFiles are missng. Contact to Support!

Reconnect Power/Cable!

Hello,
Use New module SCR module and post result u can download here http://forum.gsmhosting.com/vbb/f296...pport-2264357/

well done team
 

Operation : Reset Settings [ v1.00 ]
----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
BOOT_INTV : 6533G-FPTRUNK-W16.48.2
InternalVersion: g0d6cbdbd
Setting BOOTROM mode
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Preparing PMT
Verifying PMT
Erasing 1474560 bytes

FileSystem format done!


Done!