daulle sim pinout?

[tiri piri]

pls if you can give me the pinout for daulle sim se99 : http://www.interstar.ua/mobile/?main..._menu=2&id=256

[InfinitySupport]

Hello,

Due to a lot of different models with the same name but absolutely different hardware,
bottom connectors and different pinouts we recommend you to make detailed description of model,
attach phone photo, phone bottom connector photo and information about Gnd and Charge pins on phone bottom connector.

After you have this information prepared, please, check the next detailed description how to get pinout for your model:

use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297
if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle.txt
if not helps, please read: http:///vbb/showpo...36&postcount=7
if not helps, please read: http:///vbb/showthread.php?t=433447

[s1emens]

i used infi rx tx finder and it said:
RX=12 and TX=10 but after i made the cable it showed boot error even i dont press the power key. Is this the correct pinout, anyone? if there is a succesfull pinout could anyone share?

br,
s1emens

[InfinityHelp]

hello!

did you use cable selector to find pinout or automaticly finding pinout box?

[s1emens]

Originally Posted by InfinityHelp

hello!

did you use cable selector to find pinout or automaticly finding pinout box?

what do u mean? i try to find in shell (cable selector) but couldn't find daulle sim se99. and i use infinity rx tx finder and pinfinder v1.05 resulted RX=10 TX=12 and when i use pinfinder v1.06 reulted RX=7 TX=9 but still not working. Using reversed in v1.06 resulted RX=10 TX=12, already trt to change power cycle one by one but still not working.
any suggestion?

br,
s1emens

[s1emens]

since there is 2 combination
7/9
12/10
i'll try with
7/10 or 12/9 now. Or maybe i need to solder GND wire also?

br,
s1emens

[s1emens]

ok i'm done with this phone, tried probably 50 times but still not working.
just curious, is it possible to make infi rx tx finder as an adapter to communicate with phones and we dont have to make cable again, i mean by setting the rx tx pin electronically and we can use in chinese miracle module option to connect to phone via infi rx tx finder box?

br,
s1emens

[s1emens]

@all
thanks finally with a little tricks by connecting GND to cable it works. hhahahahaaahhaaaa

@infinityhelp
maybe u need to add gnd pin beside rx and tx. although gnd can easily measured but it really help.thanks

br,
s1emens

[InfinityHelp]

hello!

so your problem was that you used battery after you found pinout?
because if you keep phone untouched after pinfinder found phone- it for sure will communicate with CM soft or any other soft

[s1emens]

Originally Posted by InfinityHelp

hello!

so your problem was that you used battery after you found pinout?
because if you keep phone untouched after pinfinder found phone- it for sure will communicate with CM soft or any other soft

its not that, the culprit is i thought it only need rx and tx pin also, but it actually need gnd pin to be connected also to pin7/8. my mistakes. thanks

br,
s1emens

[radez]

Originally Posted by s1emens

@all
thanks finally with a little tricks by connecting GND to cable it works. hhahahahaaahhaaaa

@infinityhelp
maybe u need to add gnd pin beside rx and tx. although gnd can easily measured but it really help.thanks

br,
s1emens

Each cable needs to have ground connected .....