GSM-Forum

GSM-Forum (http://forum.gsmhosting.com/vbb/)
-   Infinity-Box (http://forum.gsmhosting.com/vbb/f296/)
-   -   Dead OT355 (http://forum.gsmhosting.com/vbb/f296/dead-ot355-1429257/)

ribaria 02-15-2012 12:17

Dead OT355
 
Hi, I try to unlock OT355 and program can't Finalize phone and he died.
After this , i reflash pone with 2 firmwares from support , but can't revive .

Here is log:
Code:

COM4 [VCP0] selected
module  v4.16
Device: Alcatel-706X, 706A
Checking data, wait...
advanced flash detection enabled
Action: rebuild security area
====>  Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:C803:A004
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
====>  Initialize ...
detecting chip #00 in region #00...
flash: EC240200000000:2BEA0000000000
flash: Samsung K5L2833ATA T 16Mb
otp offset: 00FF0000
number of flash chip/regions detected: 01/01
Initialize Done
====>  Set baud ...
460800
Set baud Done
====>  Initialize bootcode ...
Initialize bootcode Done
====>  Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [protected] type (05), 1 record(s)
TCL-ID is present
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.36BA709B.[JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08A_W08_36_SP1_V34.BIN_53F96A1C].rpl
rom info detection finished
TCL-ID detection...
TCL-ID detection done
device-id: 36BA709B
rom info ver: 05
sw version: JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08A_W08_36_SP1_V34.BIN
project-id: MAUI.08A.W08.36.SP1.V34, 1C6AF953
code offset: 00000000
ffs offset/size [01]: 00C00000/00400000
TCL-ID identification
version: 46A
provider: 355X-2ARGFR1
customization: CI46CB60
customization: XI46CB60
TCL-ID identification done
rom info structure: [protected] type (05), 1 record(s)
TCL-ID is present
ffs/eeprom address assigned: 00C00000
startup code area #1 check...
startup code area #1 fixed
sec info (detailed) detection...
searching sec info#1...
search sec info#1 finished
sim-lock status: enabled
product id: JRD_COMMUNICATION_U91X_PRODUCTS
area1 is valid
area2 is valid
area3 is valid
area4 is valid
searching sec info#2...
.
search sec info#2 finished
security area (sec info, cust) calculation...
identification header detected
customization: XI46CB60
customization name adjusted
flash: EC240200000000:2BEA0000000000
flash: EC240200000000:2BEA0000000000
Write: security area (sec info, cust)
security area (sec info, cust) calculation done
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: EC240200000000:2BEA0000000000
flash: EC240200000000:2BEA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
Check firmware integrity Done
====>  Check firmware content ...
Check firmware content Done
====>  Backup required data ...
original imei: FFFFFFFFFFFFFF
flash: EC240200000000:2BEA0000000000
Backup required data Done
====>  Patch required data ...
Patch required data Done
====>  Special operation ...
Special operation Done
====>  Write ...
Write Done
====>  Finalization ...
ffs formatting...
flash: EC240200000000:2BEA0000000000
error: wrong erase first sector at 0x0D800000
error: format ffs failed
Finalization Fail
file saved: C:\Program Files\InfinityBox\MModule\backup_security\Alcatel-706X,706A_JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08A_W08_36_SP1_V34__system_log_36BA709B_53F96A1C_20120215-130040.B0X.bin
Finished, time used: 1 min 25 sec
Remove/Install battery now !


YellowBoss 02-15-2012 14:00

Quote:

Originally Posted by ribaria (Post 8152568)
Hi, I try to unlock OT355 and program can't Finalize phone and he died.
After this , i reflash pone with 2 firmwares from support , but can't revive .

Here is log:
Code:

COM4 [VCP0] selected
module  v4.16
Device: Alcatel-706X, 706A
Checking data, wait...
advanced flash detection enabled
Action: rebuild security area
====>  Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:C803:A004
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
====>  Initialize ...
detecting chip #00 in region #00...
flash: EC240200000000:2BEA0000000000
flash: Samsung K5L2833ATA T 16Mb
otp offset: 00FF0000
number of flash chip/regions detected: 01/01
Initialize Done
====>  Set baud ...
460800
Set baud Done
====>  Initialize bootcode ...
Initialize bootcode Done
====>  Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [protected] type (05), 1 record(s)
TCL-ID is present
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.36BA709B.[JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08A_W08_36_SP1_V34.BIN_53F96A1C].rpl
rom info detection finished
TCL-ID detection...
TCL-ID detection done
device-id: 36BA709B
rom info ver: 05
sw version: JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08A_W08_36_SP1_V34.BIN
project-id: MAUI.08A.W08.36.SP1.V34, 1C6AF953
code offset: 00000000
ffs offset/size [01]: 00C00000/00400000
TCL-ID identification
version: 46A
provider: 355X-2ARGFR1
customization: CI46CB60
customization: XI46CB60
TCL-ID identification done
rom info structure: [protected] type (05), 1 record(s)
TCL-ID is present
ffs/eeprom address assigned: 00C00000
startup code area #1 check...
startup code area #1 fixed
sec info (detailed) detection...
searching sec info#1...
search sec info#1 finished
sim-lock status: enabled
product id: JRD_COMMUNICATION_U91X_PRODUCTS
area1 is valid
area2 is valid
area3 is valid
area4 is valid
searching sec info#2...
.
search sec info#2 finished
security area (sec info, cust) calculation...
identification header detected
customization: XI46CB60
customization name adjusted
flash: EC240200000000:2BEA0000000000
flash: EC240200000000:2BEA0000000000
Write: security area (sec info, cust)
security area (sec info, cust) calculation done
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: EC240200000000:2BEA0000000000
flash: EC240200000000:2BEA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
Check firmware integrity Done
====>  Check firmware content ...
Check firmware content Done
====>  Backup required data ...
original imei: FFFFFFFFFFFFFF
flash: EC240200000000:2BEA0000000000
Backup required data Done
====>  Patch required data ...
Patch required data Done
====>  Special operation ...
Special operation Done
====>  Write ...
Write Done
====>  Finalization ...
ffs formatting...
flash: EC240200000000:2BEA0000000000
error: wrong erase first sector at 0x0D800000
error: format ffs failed
Finalization Fail
file saved: C:\Program Files\InfinityBox\MModule\backup_security\Alcatel-706X,706A_JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08A_W08_36_SP1_V34__system_log_36BA709B_53F96A1C_20120215-130040.B0X.bin
Finished, time used: 1 min 25 sec
Remove/Install battery now !


Hello,

What model you talk about ?
355 or 706 ?

ribaria 02-15-2012 14:48

phone is OT706 , My mistake .
And after failed unlock . I write firmware for 355 :mad:. Now writing firmware for 706 but again :
====> Finalization ...
ffs formatting...
flash: EC240200000000:09EA0000000000
error: wrong erase first sector at 0x0D800000
error: format ffs failed
Finalization Fail

YellowBoss 02-15-2012 15:07

Flash phone with any 706 firmware from support area.
Post here operation log text to check.

ribaria 02-15-2012 15:09

Here from flashing with full flash.

Code:

COM4 [VCP0] selected
module  v4.16
Device: Alcatel-706X, 706A
Checking data, wait...
advanced flash detection enabled
Action: write flash
"smart write" active
"format ffs" active
write: Firmware
706X-2AVDHU1-367_XN36CD05_JRD25_08A_PCB01_GPRS_MT6225_S00.MAUI_08A_W08_40_SP1_V32_2010-12-17_En_Hu_It_Ro_De_full_image.B0M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
====>  Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:C803:A004
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
====>  Initialize ...
detecting chip #00 in region #00...
flash: EC240200000000:09EA0000000000
flash: Samsung K5L2833ATA T 16Mb
otp offset: 00FF0000
number of flash chip/regions detected: 01/01
Initialize Done
====>  Set baud ...
460800
Set baud Done
====>  Initialize bootcode ...
Initialize bootcode Done
====>  Check firmware integrity ...
usb bootloader detect...
usb bootloader (chip) is present: 00020000
searching rom info...
search rom info finished
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is present
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.36BA709B.[JRD25_08A_PCB01_GPRS_MT6225_S00.MAUI_08A_W08_40_SP1_V32.BIN_1910BD34].rpl
rom info detection finished
TCL-ID detection...
TCL-ID detection done
device-id: 36BA709B
rom info ver: 07
sw version: JRD25_08A_PCB01_GPRS_MT6225_S00.MAUI_08A_W08_40_SP1_V32.BIN
project-id: MAUI.08A.W08.40.SP1.V32, 34BD1019
code offset: 00020000
ffs offset/size [01]: 00D80000/0027C000
TCL-ID identification
version: 363
provider: 706X-2BTBHU1
customization: CN36CA01
customization: XN36CA01
TCL-ID identification done
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is present
ffs/eeprom address assigned: 00D80000
sec info (detailed) detection...
searching sec info#1...
search sec info#1 finished
product id: JRDHUIZHOU_MT6225_OTMINI_SERIES
area1 is valid
area2 is invalid
area3 is valid
area4 is invalid
searching sec info#2...
search sec info#2 finished
sim-lock status: disabled
product id: JRDHUIZHOU_MT6225_OTMINI_SERIES
area1 is valid
area2 is valid
area3 is valid
area4 is valid
searching sec info#3...
search sec info#3 finished
sim-lock status: disabled
product id: JRDHUIZHOU_MT6225_OTMINI_SERIES
area1 is valid
area2 is valid
area3 is valid
area4 is valid
number of sec info areas: 3
Check firmware integrity Done
====>  Check firmware content ...
Check firmware content Done
====>  Backup required data ...
original imei: FFFFFFFFFFFFFF
Backup required data Done
====>  Patch required data ...
Patch required data Done
====>  Special operation ...
Special operation Done
====>  Write ...
usb bootloader (file) is present: 00020000
rom info relocation detected
startup code area #1 check...
startup code area #1 calculation...
startup code area #1 fixed
file saved: C:\Program Files\InfinityBox\MModule\backup_security\Alcatel-706X,706A_JRD25_08A_PCB01_GPRS_MT6225_S00.MAUI_08A_W08_40_SP1_V32__system_log_36BA709B_1910BD34_20120215-155429.B0X.bin
Area: Firmware
flash: EC240200000000:09EA0000000000
Write: Firmware
usb bootloader (file) is present: 00020000
rom info relocation detected
sec info (fast) detection...
searching sec info#1...
search sec info#1 finished
searching sec info#2...
search sec info#2 finished
searching sec info#3...
search sec info#3 finished
number of sec info areas: 3
security area (sec info, cust) calculation...
error: security area (sec info, cust) header is invalid
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: EC240200000000:09EA0000000000
flash: EC240200000000:09EA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
security area (sec info, cust) calculation...
identification header detected
relocation table detected
name table[00] #9000000 detected
customization: SN367013
warning: customization name is unknown
name table[01] #7000000 detected
customization: CN36CD05
customization name adjusted
customization: CN36CD05
customization name adjusted
customization detected: CN36CD05
customization: CN36CD05
flash: EC240200000000:09EA0000000000
flash: EC240200000000:09EA0000000000
Write: security area (sec info, cust)
security area (sec info, cust) calculation done
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: EC240200000000:09EA0000000000
flash: EC240200000000:09EA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
security area (sec info, cust) calculation...
identification header detected
relocation table detected
name table[00] #9000000 detected
customization: SN367013
warning: customization name is unknown
name table[01] #7000000 detected
customization: CN36CD05
customization name adjusted
customization: CN36CD05
customization name adjusted
customization detected: CN36CD05
customization: CN36CD05
flash: EC240200000000:09EA0000000000
flash: EC240200000000:09EA0000000000
Write: security area (sec info, cust)
security area (sec info, cust) calculation done
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: EC240200000000:09EA0000000000
flash: EC240200000000:09EA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
Write Done
====>  Finalization ...
ffs formatting...
flash: EC240200000000:09EA0000000000
error: wrong erase first sector at 0x0D800000
error: format ffs failed
Finalization Fail
file saved: C:\Program Files\InfinityBox\MModule\backup_security\Alcatel-706X,706A_JRD25_08A_PCB01_GPRS_MT6225_S00.MAUI_08A_W08_40_SP1_V32__system_log_36BA709B_1910BD34_20120215-160638.B0X.bin
Finished, time used: 13 min 19 sec
Remove/Install battery now !


YellowBoss 02-15-2012 18:29

Please, try this:
go to software "Settings" page
un-check "advanced flash chip detection" box
flash phone again

ribaria 02-16-2012 10:37

Quote:

Originally Posted by YellowBoss (Post 8153601)
Please, try this:
go to software "Settings" page
un-check "advanced flash chip detection" box
flash phone again

Whitout "advanced flash chip detection" phone was successuful flashed and. powering on.Thanks.
Code:

COM4 [VCP0] selected
module  v4.16
Device: Alcatel-706X, 706A
Checking data, wait...
advanced flash detection disabled
Action: write flash
write: Firmware
706A-2AEECL3-367_XN36PG06_JRD25_08A_PCB01_GPRS_MT6225_S00.MAUI_08A_W08_40_SP1_V32_2010-12-17_En_Fr_Es_It_Pt_full_image.B0M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
====>  Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:C803:A004
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
====>  Initialize ...
detecting chip #00 in region #00...
flash: EC240200000000:09EA0000000000
flash: Samsung K5L2833ATA T 16Mb
otp offset: 00FF0000
number of flash chip/regions detected: 01/01
Initialize Done
====>  Set baud ...
921600
Set baud Done
====>  Initialize bootcode ...
Initialize bootcode Done
====>  Check firmware integrity ...
usb bootloader detect...
usb bootloader (chip) is present: 00020000
searching rom info...
search rom info finished
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is present
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.36BA709B.[JRD25_08A_PCB01_GPRS_MT6225_S00.MAUI_08A_W08_40_SP1_V32.BIN_0299651B].rpl
rom info detection finished
TCL-ID detection...
TCL-ID detection done
device-id: 36BA709B
rom info ver: 07
sw version: JRD25_08A_PCB01_GPRS_MT6225_S00.MAUI_08A_W08_40_SP1_V32.BIN
project-id: MAUI.08A.W08.40.SP1.V32, 1B659902
code offset: 00020000
ffs offset/size [01]: 00D80000/0027C000
TCL-ID identification
version: 367
provider: 706X-2AVDHU1
customization: CN36CD05
customization: XN36CD05
TCL-ID identification done
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is present
ffs/eeprom address assigned: 00D80000
sec info (detailed) detection...
searching sec info#1...
search sec info#1 finished
product id: JRDHUIZHOU_MT6225_OTMINI_SERIES
area1 is valid
area2 is invalid
area3 is valid
area4 is invalid
searching sec info#2...
search sec info#2 finished
sim-lock status: disabled
product id: JRDHUIZHOU_MT6225_OTMINI_SERIES
area1 is valid
area2 is valid
area3 is valid
area4 is valid
searching sec info#3...
search sec info#3 finished
sim-lock status: disabled
product id: JRDHUIZHOU_MT6225_OTMINI_SERIES
area1 is valid
area2 is valid
area3 is valid
area4 is valid
number of sec info areas: 3
Check firmware integrity Done
====>  Check firmware content ...
Check firmware content Done
====>  Backup required data ...
original imei: FFFFFFFFFFFFFF
Backup required data Done
====>  Patch required data ...
Patch required data Done
====>  Special operation ...
Special operation Done
====>  Write ...
usb bootloader (file) is present: 00020000
rom info relocation detected
startup code area #1 check...
startup code area #1 calculation...
startup code area #1 fixed
file saved: C:\Program Files\InfinityBox\MModule\backup_security\Alcatel-706X,706A_JRD25_08A_PCB01_GPRS_MT6225_S00.MAUI_08A_W08_40_SP1_V32__system_log_36BA709B_0299651B_20120216-105826.B0X.bin
Area: Firmware
flash: EC240200000000:09EA0000000000
Write: Firmware
usb bootloader (file) is present: 00020000
rom info relocation detected
sec info (fast) detection...
searching sec info#1...
search sec info#1 finished
searching sec info#2...
search sec info#2 finished
searching sec info#3...
search sec info#3 finished
number of sec info areas: 3
security area (sec info, cust) calculation...
error: security area (sec info, cust) header is invalid
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: EC240200000000:09EA0000000000
flash: EC240200000000:09EA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
security area (sec info, cust) calculation...
identification header detected
relocation table detected
name table[00] #9000000 detected
customization: SN367013
warning: customization name is unknown
name table[01] #7000000 detected
customization: CN36PG06
customization name adjusted
customization: CN36PG06
customization name adjusted
customization detected: CN36PG06
customization: CN36PG06
flash: EC240200000000:09EA0000000000
flash: EC240200000000:09EA0000000000
Write: security area (sec info, cust)
security area (sec info, cust) calculation done
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: EC240200000000:09EA0000000000
flash: EC240200000000:09EA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
security area (sec info, cust) calculation...
identification header detected
relocation table detected
name table[00] #9000000 detected
customization: SN367013
warning: customization name is unknown
name table[01] #7000000 detected
customization: CN36PG06
customization name adjusted
customization: CN36PG06
customization name adjusted
customization detected: CN36PG06
customization: CN36PG06
flash: EC240200000000:09EA0000000000
flash: EC240200000000:09EA0000000000
Write: security area (sec info, cust)
security area (sec info, cust) calculation done
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: EC240200000000:09EA0000000000
flash: EC240200000000:09EA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
Write Done
====>  Finalization ...
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\Alcatel-706X,706A_JRD25_08A_PCB01_GPRS_MT6225_S00.MAUI_08A_W08_40_SP1_V32__system_log_36BA709B_0299651B_20120216-111040.B0X.bin
Finished, time used: 13 min 22 sec
Remove/Install battery now !

But still locked. And same error after try to unlock.
Code:

COM4 [VCP0] selected
module  v4.16
Device: Alcatel-706X, 706A
Checking data, wait...
advanced flash detection disabled
Action: rebuild security area
====>  Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:C803:A004
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
====>  Initialize ...
detecting chip #00 in region #00...
flash: EC240200000000:09EA0000000000
flash: Samsung K5L2833ATA T 16Mb
otp offset: 00FF0000
number of flash chip/regions detected: 01/01
Initialize Done
====>  Set baud ...
921600
Set baud Done
====>  Initialize bootcode ...
Initialize bootcode Done
====>  Check firmware integrity ...
usb bootloader detect...
usb bootloader (chip) is present: 00020000
searching rom info...
search rom info finished
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is present
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.36BA709B.[JRD25_08A_PCB01_GPRS_MT6225_S00.MAUI_08A_W08_40_SP1_V32.BIN_0299651B].rpl
rom info detection finished
TCL-ID detection...
TCL-ID detection done
device-id: 36BA709B
rom info ver: 07
sw version: JRD25_08A_PCB01_GPRS_MT6225_S00.MAUI_08A_W08_40_SP1_V32.BIN
project-id: MAUI.08A.W08.40.SP1.V32, 1B659902
code offset: 00020000
ffs offset/size [01]: 00D80000/0027C000
TCL-ID identification
version: 367
provider: 706A-2AEECL3
customization: CN36PG06
customization: XN36PG06
TCL-ID identification done
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is present
ffs/eeprom address assigned: 00D80000
startup code area #1 check...
startup code area #1 fixed
sec info (detailed) detection...
searching sec info#1...
search sec info#1 finished
product id: JRDHUIZHOU_MT6225_OTMINI_SERIES
area1 is valid
area2 is invalid
area3 is valid
area4 is invalid
searching sec info#2...
search sec info#2 finished
sim-lock status: enabled
product id: JRDHUIZHOU_MT6225_OTMINI_SERIES
area1 is valid
area2 is valid
area3 is valid
area4 is valid
searching sec info#3...
search sec info#3 finished
sim-lock status: enabled
product id: JRDHUIZHOU_MT6225_OTMINI_SERIES
area1 is valid
area2 is valid
area3 is valid
area4 is valid
number of sec info areas: 3
security area (sec info, cust) calculation...
error: security area (sec info, cust) header is invalid
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: EC240200000000:09EA0000000000
flash: EC240200000000:09EA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
security area (sec info, cust) calculation...
identification header detected
customization: XN36PG06
customization name adjusted
flash: EC240200000000:09EA0000000000
flash: EC240200000000:09EA0000000000
Write: security area (sec info, cust)
security area (sec info, cust) calculation done
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: EC240200000000:09EA0000000000
flash: EC240200000000:09EA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
security area (sec info, cust) calculation...
identification header detected
customization: XN36PG06
customization name adjusted
flash: EC240200000000:09EA0000000000
flash: EC240200000000:09EA0000000000
Write: security area (sec info, cust)
security area (sec info, cust) calculation done
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: EC240200000000:09EA0000000000
flash: EC240200000000:09EA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
Check firmware integrity Done
====>  Check firmware content ...
Check firmware content Done
====>  Backup required data ...
original imei: FFFFFFFFFFFFFF
flash: EC240200000000:09EA0000000000
Backup required data Done
====>  Patch required data ...
Patch required data Done
====>  Special operation ...
Special operation Done
====>  Write ...
Write Done
====>  Finalization ...
ffs formatting...
flash: EC240200000000:09EA0000000000
error: wrong erase first sector at 0x0D800000
error: format ffs failed
Finalization Fail
file saved: C:\Program Files\InfinityBox\MModule\backup_security\Alcatel-706X,706A_JRD25_08A_PCB01_GPRS_MT6225_S00.MAUI_08A_W08_40_SP1_V32__system_log_36BA709B_0299651B_20120216-111845.B0X.bin
Finished, time used: 2 min 27 sec
Remove/Install battery now !


YellowBoss 02-16-2012 17:56

Hello,

Try to make "format ffs" operation now by both ways:
1. "complete"
2. "safe"


All times are GMT +1. The time now is 00:11.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.31709 seconds with 5 queries

SEO by vBSEO