dead Tecno W3 - GSM-Forum

muddather · 12-02-2017, 18:24

hello guys , i have dead phone (tecno W3 ) with MT6580

when i try Identify option in CM2MTK Just get this result

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 18 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 700100454838434538010AC8628CB353
Initialize Memory ...

[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2003
EMICFG_NOT_FOUND
TRY NOT HOLD VOLUME(+/-) KEYS ON CONNECT!
Boot Error!

Operation Failed
Elapsed: 00:00:24
Reconnect Power/Cable!

Do I need to flash the phone with Stock Rom

i can`t do READ FULL flash in CM2MTK

any help please

muddather · 12-02-2017, 22:56

i try to flash the phone with this firmware

MT6580_TECNO-W3_6.0_TECNO_W3-H806A1-M-161031V90

Just i am get this result

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 18 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 700100454838434538010AC8628CB353
Initialize Memory ...

[DA_ERROR] : DRAM Configure failed!
ErroCode : 0xC40B0000
EMICFG_RET_FAILED
CodeDefine : DA_DEVICE_NOT_FOUND
Boot Error!

Operation Failed
Elapsed: 00:00:25
Reconnect Power/Cable!

any help

elpring · 12-03-2017, 03:39

U can flash by sptool format+download. Battery charged

muddather · 12-03-2017, 11:25

Quote:

Originally Posted by elpring

U can flash by sptool format+download. Battery charged

I tried with SP flash tool

only get this message

BROM ERROR : s_ft_enable_Dram_fail (4032)
[emi] enable dram failed!
[hint]
Please check your load matches to the target which is to be downloade

mrbright · 01-30-2018, 07:49

Quote:

Originally Posted by muddather

I tried with SP flash tool

only get this message

BROM ERROR : s_ft_enable_Dram_fail (4032)
[emi] enable dram failed!
[hint]
Please check your load matches to the target which is to be downloade

to correct this you need the exact rom for your device,,

first check the build number of your w3 and the build number of,the rom you,are flashing

am sure they wont match so download the exact rom with the same build number as your w3

Yusuf Lawal · 01-30-2018, 08:57

Quote:

Originally Posted by muddather

hello guys , i have dead phone (tecno W3 ) with MT6580

when i try Identify option in CM2MTK Just get this result

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 18 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 700100454838434538010AC8628CB353
Initialize Memory ...

[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2003
EMICFG_NOT_FOUND
TRY NOT HOLD VOLUME(+/-) KEYS ON CONNECT!
Boot Error!

Operation Failed
Elapsed: 00:00:24
Reconnect Power/Cable!

Do I need to flash the phone with Stock Rom

i can`t do READ FULL flash in CM2MTK

any help please

This as turn to hardware issue, heat emmc and retry

Leonelle · 10-11-2018, 10:58

Hello guys
I flashed another preloader (bootloader) and the device got dead, after hours of working I was able to revive the device again as listed bellow:
The device has internal name as (W3-H806A1) or (W3-H806B1) you have to choose the proper build for your device.
Then you have to choose the correct bootloader of your device here is the link of all boot-loaders builds:
https://mega.nz/#F!TZBimKJD!3sYbVVL57KdtIjjYZf5ywA
Please match the Flash ID supported by bootloader
and use this SP Flash Tool 5.1628
Try to hold Volume Up or Volume Down while connecting USB cable during flash operation...
Try and feed me back
Thanks

Murobaba · 11-18-2018, 22:59

Please I need file to revive my dead tecno wx3

mequipz · 08-16-2019, 12:13

Hello I got the same issue here, Tecno W3 completely dead..
Miracle box shows BootData Error(1) 1366 FD4_O.
Yes am trying all your suggestions to fix the problem, you will know...

Yusuf Lawal · 08-16-2019, 15:00

Quote:

Originally Posted by mequipz

Hello I got the same issue here, Tecno W3 completely dead..
Miracle box shows BootData Error(1) 1366 FD4_O.
Yes am trying all your suggestions to fix the problem, you will know...

Where is cm2 operation log?

Wambura1 · 01-03-2020, 18:26

Hi, today i have got the phone Tecno W3 from my customer to flash it but when i tried to flash it with Miracle Thunder it readed by the tool and everything showed successful means that the phone is flashed successful but when i turned on the phone, there is nothing changed, all problems, passwords, custom wallpapers and others remains there. What does cause the phone to be unflashable?

Yusuf Lawal · 01-03-2020, 18:38

Quote:

Originally Posted by Wambura1

Hi, today i have got the phone Tecno W3 from my customer to flash it but when i tried to flash it with Miracle Thunder it readed by the tool and everything showed successful means that the phone is flashed successful but when i turned on the phone, there is nothing changed, all problems, passwords, custom wallpapers and others remains there. What does cause the phone to be unflashable?

I will advise you to buy INFINITY-BOX CM2 to reduce your stress.

With CM2 u just need to read EMMC TEST.

Meanwhile your phone emmc is faulty...

akeel2000 · 01-06-2020, 08:16

flash only preloader your phone preeloader not active

rojazgsm · 02-27-2020, 14:59

dont waste time this is a emmc chip problem try to make reballing if not working then change emmc chip u will b done

12-02-2017, 18:24	#1 (permalink)
muddather Insane Poster Join Date: Nov 2015 Posts: 61 Member: 2493870 Status: Offline Thanks Meter: 16	dead Tecno W3 hello guys , i have dead phone (tecno W3 ) with MT6580 when i try Identify option in CM2MTK Just get this result Operation : Check / Read Info [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 18 ] Sync... Inital Boot Ok! BB_CPU_PID : 6580 BB_CPU_NME : [MediaTek] MT6580_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x0005 BLVersion : 0x00FE PreLoader : NOT Active [ Erased ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x94 NAND Flash : NOT INSTALLED eMMC Flash : 700100454838434538010AC8628CB353 Initialize Memory ... [DA_ERROR] : DRAM Configure failed! ErroCode : 0x2003 EMICFG_NOT_FOUND TRY NOT HOLD VOLUME(+/-) KEYS ON CONNECT! Boot Error! Operation Failed Elapsed: 00:00:24 Reconnect Power/Cable! Do I need to flash the phone with Stock Rom i can`t do READ FULL flash in CM2MTK any help please

12-02-2017, 22:56	#2 (permalink)
muddather Insane Poster Join Date: Nov 2015 Posts: 61 Member: 2493870 Status: Offline Thanks Meter: 16	i try to flash the phone with this firmware MT6580_TECNO-W3_6.0_TECNO_W3-H806A1-M-161031V90 Just i am get this result Operation : Flash [ v1.58 ] ======= Flash 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 18 ] Sync... Inital Boot Ok! BB_CPU_PID : 6580 BB_CPU_NME : [MediaTek] MT6580_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x0005 BLVersion : 0x00FE PreLoader : NOT Active [ Erased ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x94 NAND Flash : NOT INSTALLED eMMC Flash : 700100454838434538010AC8628CB353 Initialize Memory ... [DA_ERROR] : DRAM Configure failed! ErroCode : 0xC40B0000 EMICFG_RET_FAILED CodeDefine : DA_DEVICE_NOT_FOUND Boot Error! Operation Failed Elapsed: 00:00:25 Reconnect Power/Cable! any help

12-03-2017, 03:39	#3 (permalink)
elpring No Life Poster Join Date: Oct 2007 Location: EGYPT Posts: 3,804 Member: 601566 Status: Offline Sonork: 100.1637134 Thanks Meter: 551	U can flash by sptool format+download. Battery charged

10-11-2018, 10:58	#7 (permalink)
Leonelle Freak Poster Join Date: Feb 2014 Location: MEA Age: 30 Posts: 250 Member: 2119579 Status: Offline Thanks Meter: 44	Hello guys I flashed another preloader (bootloader) and the device got dead, after hours of working I was able to revive the device again as listed bellow: The device has internal name as (W3-H806A1) or (W3-H806B1) you have to choose the proper build for your device. Then you have to choose the correct bootloader of your device here is the link of all boot-loaders builds: https://mega.nz/#F!TZBimKJD!3sYbVVL57KdtIjjYZf5ywA Please match the Flash ID supported by bootloader and use this SP Flash Tool 5.1628 Try to hold Volume Up or Volume Down while connecting USB cable during flash operation... Try and feed me back Thanks

11-18-2018, 22:59	#8 (permalink)
Murobaba Junior Member Join Date: Aug 2017 Posts: 1 Member: 2746896 Status: Offline Thanks Meter: 1	Please I need file to revive my dead tecno wx3

08-16-2019, 12:13	#9 (permalink)
mequipz Junior Member Join Date: May 2019 Location: Kenya, Bungoma county Posts: 4 Member: 2911939 Status: Offline Thanks Meter: 0	Hello I got the same issue here, Tecno W3 completely dead.. Miracle box shows BootData Error(1) 1366 FD4_O. Yes am trying all your suggestions to fix the problem, you will know...

01-03-2020, 18:26	#11 (permalink)
Wambura1 Junior Member Join Date: May 2017 Location: Tanzania Posts: 5 Member: 2712962 Status: Offline Thanks Meter: 1	Hi, today i have got the phone Tecno W3 from my customer to flash it but when i tried to flash it with Miracle Thunder it readed by the tool and everything showed successful means that the phone is flashed successful but when i turned on the phone, there is nothing changed, all problems, passwords, custom wallpapers and others remains there. What does cause the phone to be unflashable?

01-06-2020, 08:16	#13 (permalink)
akeel2000 Freak Poster Join Date: Jun 2009 Posts: 392 Member: 1051138 Status: Offline Sonork: 123456 Thanks Meter: 382	flash only preloader your phone preeloader not active

02-27-2020, 14:59	#14 (permalink)
rojazgsm Junior Member Join Date: Mar 2008 Location: dar essalaam Posts: 37 Member: 729685 Status: Offline Thanks Meter: 2	dont waste time this is a emmc chip problem try to make reballing if not working then change emmc chip u will b done