Tecno IA5 - unable to read firmware

[SkyNet4u]

model : tecno ia5
condition when came : stuck on camon logo [and no recovery mode]


info :

Operation : Identify [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 425 [MSM8917]
ID_BLOCK_S : DFFDBBBD
ID_BLOCK_L : CA3A50AE0995828D7A2F212EE9B0C008
ID_BLOCK_L : D4AF11B8BD24961FB27D568F85680645
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HBG4a2
Boot Ok!


Brand : TECNO
ProdName : QL1662
ProdModel : TECNO IA5
Device : TECNO-IA5
AndroidVer: 8.0.0
Manufact. : TECNO MOBILE LIMITED
SysPatch : OPR1.170623.032
DevComTime: 28/04/2018 3.25.43 pm
QLMxPRJ : IA5-QL1662B-O-IN-180428V15

USERData : ENCRYPTED
GCSec : NORMAL

Done!
Elapsed: 00.00.16

Reconnect Power/Cable!

after wipe cache & user data phone started normally

Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 425 [MSM8917]
ID_BLOCK_S : DFFDBBBD
ID_BLOCK_L : CA3A50AE0995828D7A2F212EE9B0C008
ID_BLOCK_L : D4AF11B8BD24961FB27D568F85680645
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HBG4a2
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!

Done!
Elapsed: 00.00.13

Reconnect Power/Cable!

so i tried to read firmware but failed

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 425 [MSM8917]
ID_BLOCK_S : DFFDBBBD
ID_BLOCK_L : CA3A50AE0995828D7A2F212EE9B0C008
ID_BLOCK_L : D4AF11B8BD24961FB27D568F85680645
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HBG4a2
Boot Ok!


Brand : TECNO
ProdName : QL1662
ProdModel : TECNO IA5
Device : TECNO-IA5
AndroidVer: 8.0.0
Manufact. : TECNO MOBILE LIMITED
QLMxPRJ : IA5-QL1662B-O-IN-180428V15

DevInfo : MSM89xx__TECNO_MOBILE_LIMITED__TECNO__ANDR_v8.0.0_ _TECNO_IA5__TECNO-IA5__QL1662__IA5-QL1662B-O-IN-180428V15

ReportFile : C:\InfinityBox\CM2QLM\QLM_16report.log
Send report to mail : [email protected] with title "QFW" !

INFO : Device is not supported yet!
INFO : Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

Tecno IA5.png

QLM_16report.rar