G-Tide V6 error on flash

[abdoune]

Have G-tide V6 Mt6580,that when power on stuck on V6 Display, trrying to format it but CM2 MTK gives error , then decide to read flash before flash it , read flash success but flash handset stuck on flash pre-erase see log :


Identify :

Card found : S/N : 0%€£$@E6 , v0130
Chinese Miracle II [MTK module] v 1.50

Operation : Check / Read Info [ v1.50 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 29 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 7001005631303030385008FB64FF8275
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 80001
[eMMC] : FLASH_CID : 7001005631303030385008FB64FF8275
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C3000000
[eMMC] : FLASH_UCP : 7216 MiB [eMMC 8 GiB]
DEV RID : 0x037786E701661004BD55DBC295B29317
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : G-TiDE V6
ProdName : G-TiDE V6
ProdModel : G-TiDE V6
Device : G-TiDE V6
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_ESKY6580.WE.L_P1

MODEM :
BaseBand : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V6_P3_1_wg_n

EXTRA :
LCD : Not info available
LCD Res : 1280x720
TOUCH [0] : GT1XX
CAM [0] : gc2755_mipi_raw
CAM [1] : gc2355_mipi_raw
CAM [2] : imx219_mipi_raw
CAM [3] : gc2145_mipi_yuv
CAM [4] : hm5040_mipi_raw
CAM [5] : hm8131_mipi_raw
CAM [6] : gc5004_mipi_raw
CAM [7] : gc5024_mipi_raw
CAM [8] : hi842_mipi_raw
CAM [9] : hi545_mipi_raw
CAM [10] : s5k5e2ya_mipi_raw
MODEM : mt6580_demo_hspa_default_band1_spc
LOCALE : en_US zh_CN fr_FR ar_EG ar_IL ru_RU hi_IN pt_PT pt_BR de_DE bg_BG vi_VN in_ID iw_IL he_IL ur_PK th_TH sw_TZ

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

Format Operation :

Operation : Format FileSystem [ v1.50 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 29 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 7001005631303030385008FB64FF8275
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 80001
[eMMC] : FLASH_CID : 7001005631303030385008FB64FF8275
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C3000000
[eMMC] : FLASH_UCP : 7216 MiB [eMMC 8 GiB]
DEV RID : 0x037786E701661004BD55DBC295B29317
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Format/Reset Error!

Operation Failed
Elapsed: 00:02:02
Reconnect Power/Cable!

Write flash Operation :

Scatter Load Ok , BaseBand : MT6580 , Project : esky6580_we_l , Storage : EMMC
Files found : 9 , Set to Flash : 8
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : G-TiDE V6
Device Model : G-TiDE V6
Device CPU : MT6580
Device IntName : G-TiDE V6
Device Version : 5.1
Device Compile : 13/11/2015 11:22:13
Device Project : ALPS.L1.MP6.V2_ESKY6580.WE.L_P1
Device ExtInfo : G-TiDE V6
Ready to Flash!

Operation : Flash [ v1.50 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 29 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 7001005631303030385008FB64FF8275
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 80001
[eMMC] : FLASH_CID : 7001005631303030385008FB64FF8275
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C3000000
[eMMC] : FLASH_UCP : 7216 MiB [eMMC 8 GiB]
DEV RID : 0x037786E701661004BD55DBC295B29317
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6580 , Project : esky6580_we_l , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 4060 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000001C80000-0x0000000003320000
Erase Error! Something went wrong!

Operation Failed
Elapsed: 00:01:38
Reconnect Power/Cable!

Information with fastboot :

INFO max-download-size: 0x8000000
INFO partition-size:userdata: 32000000
INFO partition-type:userdata: ext4
INFO partition-size:cache: 10000000
INFO partition-type:cache: ext4
INFO partition-size:system: 80000000
INFO partition-type:system: ext4
INFO partition-size:metadata: 2760000
INFO partition-type:metadata: raw data
INFO partition-size:nvdata: 2000000
INFO partition-type:nvdata: ext4
INFO partition-size:frp: 100000
INFO partition-type:frp: raw data
INFO partition-size:expdb: a00000
INFO partition-type:expdb: raw data
INFO partition-size:logo: 800000
INFO partition-type:logo: raw data
INFO partition-sizeara: 80000
INFO partition-typeara: raw data
INFO partition-size:keystore: 800000
INFO partition-type:keystore: raw data
INFO partition-size:secro: 600000
INFO partition-type:secro: raw data
INFO partition-sizeemkeystore: 200000
INFO partition-typeemkeystore: raw data
INFO partition-size:recovery: 1000000
INFO partition-type:recovery: raw data
INFO partition-size:boot: 1000000
INFO partition-type:boot: raw data
INFO partition-size:lk: 60000
INFO partition-type:lk: raw data
INFO partition-size:seccfg: 40000
INFO partition-type:seccfg: raw data
INFO partition-sizerotect2: a00000
INFO partition-typerotect2: ext4
INFO partition-sizerotect1: a00000
INFO partition-typerotect1: ext4
INFO partition-size:nvram: 500000
INFO partition-type:nvram: raw data
INFO partition-sizeroinfo: 300000
INFO partition-typeroinfo: raw data
INFO partition-sizereloader: 40000
INFO partition-typereloader: raw data
INFO off-mode-charge: 1
INFO warranty: yes
INFO unlocked: no
INFO secure: yes
INFO kernel: lk
INFO product: ESKY6580_WE_L
INFO version: 0.5
all: Done!!
finished. total time: 0.094s

D:\apk>fastboot -w
erasing 'userdata'... FAILED (remote: unknown command)
finished. total time: -0.000s

Salam

[abdoune]

Also error with flash tool (see pictureà
Salam

[abdoune]

Test with SPFlashTool :

============ Memory Detection Report ===========

Internal RAM:


External RAM:

Type = DRAM

Size = 0x40000000 (1024MB/8192Mb)

NAND Flash:

ERROR: NAND Flash was not detected!

EMMC:

EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000400000(4MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000001c3000000(7216MB)

UFS:

ERROR: UFS was not detected!

============ RAM Test ============

Data Bus Test:

[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!

Address Bus Test:

[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
OK!!

RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK!!

Increment/Decrement Test:
Writing...
OK!!

[syed tuqeer]

Hello,
POst phone condition ,
make HW test and post logs here

[abdoune]

Originally Posted by syed tuqeer

Hello,
POst phone condition ,
make HW test and post logs here

HW Test operation :

Chinese Miracle II [MTK module] v 1.50

Operation : HW Test [ v1.50 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 29 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 7001005631303030385008FB64FF8275
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 80001
[eMMC] : FLASH_CID : 7001005631303030385008FB64FF8275
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C3000000
[eMMC] : FLASH_UCP : 7216 MiB [eMMC 8 GiB]
DEV RID : 0x037786E701661004BD55DBC295B29317
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Processing Miscellaneous test
MSC : BatteryLevel : 4094 mV

[Processing] FlashMemory Read-Write test
[eMMC] : [KINGSTON] , 80001 , 0x1C3000000 , 7216 MiB
[eMMC] : CID : 7001005631303030385008FB64FF8275

[eMMC] : MODE : SQ-WR
[FAILED] : Probably, something wrong with eMMC! Check cable and battery!

Operation Failed
Elapsed: 00:00:43
Reconnect Power/Cable!

Salam

[syed tuqeer]

Hello,
EMMC damaged

[abdoune]

Strange how i can read successfully flash file approximativly 2gb but cant restore the same flash file readed before
Salam

[syed tuqeer]

because , EMMC is now read only

[mihafmedia]

Elite EVO E50 File needed without password.