G630-U10 Full Dump Done By Great CM2QLM But,, - GSM-Forum

Morgan Team · 12-14-2016, 21:10

Dear Infinity Box Team i succeeded in dump HUAWEI G630-U10 by your genius tool CM2QLM...

Quote:

Operation : Read Flash [ v1.04 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x12]
ID_BLOCK_S : 097EED67
ID_BLOCK_I : 008140E1
ID_BLOCK_L : 5BF3348E6EB6D41A
ID_BLOCK_L : C060A78CC6E5E5D6
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!

Brand : Huawei
ProdName : G630-U10
ProdModel : G630-U10
Device : hwG630-U10
AndroidVer: 4.3
Manufact. : HUAWEI
QLMxCPU : MSM8610

DevInfo : MSM8610__HUAWEI__Huawei__ANDR_v4.3__G630-U10__hwG630-U10__G630-U10

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : sbl1.mbn
[Read Ok] : deploy.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : oemdata.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : fs_gc.img
[Read Ok] : persist.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : cust.img
[Read Ok] : cache.img
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8x10 / eMMC
Firmware Size : 1234 MiB

Done!
Elapsed: 00:02:50

But when i Flash any Device with the dump i get fail and that in 2 piece

The first device fail log..

Quote:

Operation : Flash [ v1.04 ]

Verify FW package ...
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x12]
ID_BLOCK_S : 0A850404
ID_BLOCK_I : 008140E1
ID_BLOCK_L : 5BF3348E6FB8A3B7
ID_BLOCK_L : C060A78CC7EB927B
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!

Files in Chain : 21
Flashing now

Flashing : gpt_main0.bin
Flashing : sbl1.mbn
Flashing : deploy.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : emmc_appsboot.mbn
Flashing : NON-HLOS.bin
Flashing : persist.img
Flashing : boot.img
Flashing : recovery.img
Flashing : cust.img
Flashing : cache.img
ProgStart : start 1187840, num 8
ProgFinish : Read back verify failed at sector 1634792013,num sectors 1187840
Flash Error , No ACK message! Check Battery charge , Cable

Error : Flashing failed!
Check previous message for more info!

The second device is just Stuck in flash file (NON-HLOS) and the exe is gone freeze..

Note..

i was read backup from device with locked bootloader and anther dump from device with unlocked bootloader, and i'm sure that the all devices have the same android ver (V100R001C00B159) but with the 2 dump i got the same result as i explained earlier.

thanx at all for your great team guys and hope that u can help me

InfinityHelp · 12-15-2016, 08:00

Hello,

What was the problems with phones that you have tried to flash ?

Morgan Team · 12-15-2016, 12:38

Both of them is dead boot

chlakh11787 · 01-02-2017, 03:32

I have dame prob messages on G630-u20
I have read thé dump from working phone
But :
ProgStart : start 1187840, num 8
ProgFinish : Read back verify failed at sector 1634792013,num sectors 1187840
Flash Error , No ACK message! Check Battery charge , Cable

urani · 02-10-2017, 13:55

I have received another model of Huawei G630-U20 which is in Dead state. I read all the flash from it successfully, but I am wondering if I have fresh flash from alive phone and writing it to this phone maybe my phone will become alive again?
MSM8610__HUAWEI__Huawei__ANDR_v4.3__G630-U20__hwG630-U20__G630-U20

If you have this file archive it and upload somewhere I would be very thankful.

TIA

Blaze25 · 04-02-2017, 02:25

i have also like this if i write dump file...

JayDi · 04-02-2017, 16:56

Open memory tool and make eMMC test.
Post logs.

drjaved_akhter · 04-19-2017, 19:16

Quote:

Originally Posted by Morgan Team

Dear Infinity Box Team i succeeded in dump HUAWEI G630-U10 by your genius tool CM2QLM...

But when i Flash any Device with the dump i get fail and that in 2 piece

The first device fail log..

The second device is just Stuck in flash file (NON-HLOS) and the exe is gone freeze..

Note..

i was read backup from device with locked bootloader and anther dump from device with unlocked bootloader, and i'm sure that the all devices have the same android ver (V100R001C00B159) but with the 2 dump i got the same result as i explained earlier.

thanx at all for your great team guys and hope that u can help me

please upload dump file........................

Xaker2012 · 12-29-2017, 19:44

upload dump file&&&&

Kukuphilmur · 06-04-2018, 20:27

When you see such errors try to use qpstool original qualcomm flasher/programer for better result.

12-15-2016, 08:00	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	Hello, What was the problems with phones that you have tried to flash ?

12-15-2016, 12:38	#3 (permalink)
Morgan Team Junior Member Join Date: Dec 2014 Posts: 17 Member: 2317191 Status: Offline Thanks Meter: 0	Both of them is dead boot

01-02-2017, 03:32	#4 (permalink)
chlakh11787 Freak Poster Join Date: Oct 2006 Location: Basel Age: 43 Posts: 446 Member: 378892 Status: Offline Thanks Meter: 51	I have dame prob messages on G630-u20 I have read thé dump from working phone But : ProgStart : start 1187840, num 8 ProgFinish : Read back verify failed at sector 1634792013,num sectors 1187840 Flash Error , No ACK message! Check Battery charge , Cable

02-10-2017, 13:55	#5 (permalink)
urani Crazy Poster Join Date: Nov 2003 Location: sdfds Posts: 56 Member: 44703 Status: Offline Thanks Meter: 7	I have received another model of Huawei G630-U20 which is in Dead state. I read all the flash from it successfully, but I am wondering if I have fresh flash from alive phone and writing it to this phone maybe my phone will become alive again? MSM8610__HUAWEI__Huawei__ANDR_v4.3__G630-U20__hwG630-U20__G630-U20 If you have this file archive it and upload somewhere I would be very thankful. TIA

04-02-2017, 02:25	#6 (permalink)
Blaze25 Freak Poster Join Date: Jul 2007 Location: North Cotabato Posts: 322 Member: 554923 Status: Offline Thanks Meter: 75	i have also like this if i write dump file...

04-02-2017, 16:56	#7 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Open memory tool and make eMMC test. Post logs.

12-29-2017, 19:44	#9 (permalink)
Xaker2012 Banned Join Date: May 2013 Location: Hacked by Hackflax on tiktok Posts: 1,548 Member: 1941705 Status: Offline Thanks Meter: 1,248	upload dump file&&&&

06-04-2018, 20:27	#10 (permalink)
Kukuphilmur Freak Poster Join Date: Jun 2013 Location: Zimbabwe, mutare Posts: 210 Member: 1957238 Status: Offline Thanks Meter: 80	When you see such errors try to use qpstool original qualcomm flasher/programer for better result.