Gd67 & Gd68 - GSM-Forum

..:HGSM:.. · 11-26-2005, 12:14

hi Infinity team

i can flash gd68 by GD67 with 1.05C.... it's the same ??

kasner · 11-26-2005, 13:02

Yes. You can do it w/o pb

..:HGSM:.. · 11-26-2005, 14:56

wath the solution !
with cable GD92 !
i have this message :
Power On phone now...
Enter flash mode fail. Try again.
!!!!

**InfinitySupport** · 11-26-2005, 15:13

Hi,

Pls, check com-port selection, maybe wrong port selected.
Also, what is with phone when you start software and press phone power button ?

..:HGSM:.. · 11-26-2005, 15:26

when i switched power on i have always this message
Enter flash mode fail. Try again.

**InfinitySupport** · 11-26-2005, 16:53

What is with phone ? Can it power-on normally or maybe it's dead phone ?
Did you checked com port selection ?

..:HGSM:.. · 11-26-2005, 18:41

The phone is dead i hve checked the mothercard it is ok
its a flash problem

**InfinitySupport** · 11-26-2005, 19:12

Hi,
it's impossible to flash dead phones (erased boot core) with Infinity (abd with original flasher too). Its need to use external flash chip programmer to program desoldered flash chip directly.

debeliamark · 11-27-2005, 07:39

@festhache

I you go to reprogram GD67/ or GD87 - uff - i hate GD87 flash reprograming/ flash IC-s on external progammer MUST on all cases readout flash dump, PATCH ONLY boot code and rewrite back /now you can flash it with downloader/, because if you rewrite eeprom zone, then phone can be flashed, will enter in test mode via CB2000, but important data locked to HW shall be mismatched and phone cannot be turned on and used.

dhanesh_wish · 02-25-2010, 15:25

gd 68 dead i am trying to flash but there Flash data not loaded i downloaded flash file on support gd 67 but how to take the flash file in run ofter

YellowBoss · 02-25-2010, 16:41

Quote:

Originally Posted by dhanesh_wish

gd 68 dead i am trying to flash but there Flash data not loaded i downloaded flash file on support gd 67 but how to take the flash file in run ofter

http://forum.gsmhosting.com/vbb/showthread.php?t=936588

11-26-2005, 12:14	#1 (permalink)
..:HGSM:.. No Life Poster Join Date: Apr 2004 Age: 51 Posts: 524 Member: 62419 Status: Offline Thanks Meter: 66	Gd67 & Gd68 hi Infinity team i can flash gd68 by GD67 with 1.05C.... it's the same ??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlock remotely all GU87 GD87 GD67 GD68 GD87e all versions	gsmsupport	Main Sales Section	0	06-01-2004 21:22
Is it possible to flash GD68 with flash for GD67?	Bogi	Panasonic	13	04-25-2004 18:44
I need Channel Box for GD67 , GD68	kisa55	Panasonic	5	01-20-2004 20:40
Gd67 GD68 French..	speedcomtop	Panasonic	4	09-28-2003 01:17
GD67 and GD68 FLASHER and LANG ACTIVATOR	Bazooka	Panasonic	7	02-07-2003 11:29

11-26-2005, 13:02	#2 (permalink)
kasner No Life Poster Join Date: Mar 2004 Location: Ukraine Age: 52 Posts: 1,201 Member: 56469 Status: Offline Thanks Meter: 136	Yes. You can do it w/o pb

11-26-2005, 14:56	#3 (permalink)
..:HGSM:.. No Life Poster Join Date: Apr 2004 Age: 51 Posts: 524 Member: 62419 Status: Offline Thanks Meter: 66	wath the solution ! with cable GD92 ! i have this message : Power On phone now... Enter flash mode fail. Try again. !!!!

11-26-2005, 15:13	#4 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hi, Pls, check com-port selection, maybe wrong port selected. Also, what is with phone when you start software and press phone power button ?

11-26-2005, 15:26	#5 (permalink)
..:HGSM:.. No Life Poster Join Date: Apr 2004 Age: 51 Posts: 524 Member: 62419 Status: Offline Thanks Meter: 66	when i switched power on i have always this message Enter flash mode fail. Try again.

11-26-2005, 16:53	#6 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	What is with phone ? Can it power-on normally or maybe it's dead phone ? Did you checked com port selection ?

11-26-2005, 18:41	#7 (permalink)
..:HGSM:.. No Life Poster Join Date: Apr 2004 Age: 51 Posts: 524 Member: 62419 Status: Offline Thanks Meter: 66	The phone is dead i hve checked the mothercard it is ok its a flash problem

11-26-2005, 19:12	#8 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hi, it's impossible to flash dead phones (erased boot core) with Infinity (abd with original flasher too). Its need to use external flash chip programmer to program desoldered flash chip directly.

11-27-2005, 07:39	#9 (permalink)
debeliamark No Life Poster Join Date: May 2001 Location: Bulgaria Age: 56 Posts: 4,796 Member: 4627 Status: Offline Sonork: 57528:debeliamark Thanks Meter: 1,034	@festhache I you go to reprogram GD67/ or GD87 - uff - i hate GD87 flash reprograming/ flash IC-s on external progammer MUST on all cases readout flash dump, PATCH ONLY boot code and rewrite back /now you can flash it with downloader/, because if you rewrite eeprom zone, then phone can be flashed, will enter in test mode via CB2000, but important data locked to HW shall be mismatched and phone cannot be turned on and used.

02-25-2010, 15:25	#10 (permalink)
dhanesh_wish Insane Poster Join Date: Jan 2009 Location: warangal andrapradesh Posts: 68 Member: 951640 Status: Offline Thanks Meter: 3	gd 68 dead i am trying to flash but there Flash data not loaded i downloaded flash file on support gd 67 but how to take the flash file in run ofter