Gionee p2m read factory firmware sucess - GSM-Forum

Rohitdahal · 11-08-2015, 07:12

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 116 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6580
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6580_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 150100513832534D42000DBE559A629F
DA Stat : v4.2 on BBID : 0x94
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMS28
[eMMC] : FLASH_CID : 150100513832534D42000DBE559A629F
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : GiONEE
ProdName : P2M
ProdModel : P2M
Device : GiONEE_WBW5612
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : WBW5612GN_0202_T5316

[Read Ok] : preloader_gionee6580_we_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / gionee6580_we_l / EMMC
FW Size : 1824 MiB
Scatter saved to : K:\GIONEE\P2M\MT6580__GiONEE__P2M__GiONEE_WBW5612_ _5.1__WBW5612GN_0202_T5316\

All done!

Done!
Elapsed: 00:08:40
Reconnect Power/Cable!

shinnelab · 09-28-2016, 11:11

can you provide me that bin file

11-08-2015, 07:12	#1 (permalink)
Rohitdahal Freak Poster Join Date: Apr 2008 Location: Kathmandu (Ason) Nepal Posts: 120 Member: 759507 Status: Offline Sonork: 100.1660105 Thanks Meter: 71	Gionee p2m read factory firmware sucess 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 116 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6580 BB_CPU_HW : CA00 BB_CPU_SW : 8A00 BB_CPU_SB : 0000 BB_CPU_NM : [MediaTek] MT6580_S00 Processing BROM stage SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Ver : MTK_AllInOne_DA_v7.1533.03 NAND_ID : 00000000000000000000000000000000 eMMC_ID : 150100513832534D42000DBE559A629F DA Stat : v4.2 on BBID : 0x94 DA Sent. Configure setting now ... DA started successuflly eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0015 , OEM : 0100 [eMMC] : FLASH_INF : BMS28 [eMMC] : FLASH_CID : 150100513832534D42000DBE559A629F [eMMC] : FLASH_EXT : 00400000/00400000 [eMMC] : FLASH_LEN : 0x00000003A3E00000 INT RAM : 0x00020000 EXT RAM : 0x40000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Conent now ... Brand : GiONEE ProdName : P2M ProdModel : P2M Device : GiONEE_WBW5612 AndroidVer: 5.1 MTKxCPU : MT6580 MTKxPRJ : WBW5612GN_0202_T5316 [Read Ok] : preloader_gionee6580_we_l.bin [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : logo.bin [Read Ok] : secro.img [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : userdata.img [ScatCFG] : MT6580 / V1.1.2 / gionee6580_we_l / EMMC FW Size : 1824 MiB Scatter saved to : K:\GIONEE\P2M\MT6580__GiONEE__P2M__GiONEE_WBW5612_ _5.1__WBW5612GN_0202_T5316\ All done! Done! Elapsed: 00:08:40 Reconnect Power/Cable!

09-28-2016, 11:11	#2 (permalink)
shinnelab Insane Poster Join Date: Jan 2016 Posts: 63 Member: 2520457 Status: Offline Thanks Meter: 12	can you provide me that bin file