help newbie for using infinity box!!

[dArk_shAdE]

hi mates pls help how to format 6300 china phone using infinity and how to reset code for motorola c139.. im newbie for using infinity box.. pls guide me how to run the software or check the settings etc.. thanks in advanced...

[YellowBoss]

Originally Posted by dArk_shAdE

hi mates pls help how to format 6300 china phone using infinity and how to reset code for motorola c139.. im newbie for using infinity box.. pls guide me how to run the software or check the settings etc.. thanks in advanced...

Hello,

How to write flash (upgrade/downgrade firmware, change language):

1. connect cable from box to device
2. run "Infinity-Box Shell" software
3. select required model
4. run required software module
5. select required model (if need)
6. go to software "Settings" page and select COM port
7. go to software "Flash" page and load required files
8. press "Write" button and follow instruction given by software


How to read flash:

1. connect cable from box to device
2. run "Infinity-Box Shell" software
3. select required model
4. run required software module
5. select required model (if need)
6. go to software "Settings" page and select COM port
7. go to software "Service" page
8. press "Read flash" (or "Read full flash") button and follow instruction given by software


How to unlock (remove sp-lock, provider lock etc.):

1. connect cable from box to device
2. run "Infinity-Box Shell" software
3. select required model
4. run required software module
5. select required model (if need)
6. go to software "Settings" page and select COM port
7. go to software "Service" page
8. press "SP-Unlock" button and follow instruction given by software


How to reset/format ffs (reset setting to default values, repair freez/restart etc.):
- at first try to make "safe format" (if this option exist)
- if "safe" option is not works try to make "complete" format (if this option exist)

1. connect cable from box to device
2. run "Infinity-Box Shell" software
3. select required model
4. run required software module
5. select required model (if need)
6. go to software "Settings" page and select COM port
7. go to software "Service" page
8. select format mode "safe" or "complete" (if mode is available)
9. press "Reset" or "Format" button and follow instruction given by software