Huawei G6600 unlock help

[invitor]

phone says code error.... here is the log:


COM9 [USBSER000] selected
module v3.84
Action: read unlock codes
unlock method: read codes
Model: Huawei-G6600
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6235:8A04:8A01]...
CPU: MT6235
chip: 0000:0000:0003
status: FF
rom: 4D573031
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6235,E04
Date: 2000.00.00
Version: 1.0
Version: E5.2UM01V01.04
Version: BYD35_09A_PMWY_HW
82 byte(s) read
imei: 35634404055168
connection Ok
189 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 1234
177 byte(s) read
reading data...
972 byte(s) read
lock[1] code: + 20946905
lock[2] code: + default
lock[3] code: + 1122
lock[4] code: - default
lock[5] code: - default
lock[6] code: + default
lock[7] code: + default
if phone do not ask for a code try: *983*8284#
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone (do not remove battery)
- read unlock codes
- restore original imei
Finished, time used: 15 sec
Remove/Install battery now !

but code is wrong any ideas

[invitor]

i try with Smart-Fast and Complete Mode and now is unlocked