Huawei Y530-U051 MSM8610 Read ROM & Convert Dload File & Write Done Great CM2 - GSM-Forum

**>>Gsmmilon>>** · 06-21-2017, 09:09

Huawei Y530-U051 MSM8610 Read ROM & Convert Dload File & Write Done Great CM2

Huawei Y530-U051 Hang On Logo Problem Solve By As Milon & Infinity CM2

Read Firmware :

Quote:

Operation : Read Flash [ v1.14 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 0A254D65
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 6282F806B13D2A2502779986411898B0
ID_BLOCK_L : FC973990850CBE37CA256EA7AD405E7D
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!

Brand : Huawei
ProdName : Y530-U051
ProdModel : HUAWEI Y530-U051
Device : Y530-U051
AndroidVer: 4.3
Manufact. : HUAWEI
QLMxCPU : MSM8610

DevInfo : MSM8610__HUAWEI__Huawei__ANDR_v4.3__HUAWEI_Y530-U051__Y530-U051__Y530-U051

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : sbl1.mbn
[Read Ok] : deploy.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : oemdata.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : fs_gc.img
[Read Ok] : persist.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : cust.img
[Read Ok] : cache.img
[Read Ok] : misc.img
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8x10 / eMMC
Firmware Size : 1145 MiB

Done!
Elapsed: 00:03:40

Reconnect Power/Cable!

Convert Dload File , System+Recovery+Userdata :

Convert File Copy in to CM2 file folder :

Write Flash Done :

Quote:

Loading firmware ...
Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand : Huawei
Device Manufact.: HUAWEI
Device Model : Y530-U051
Device CPU : MSM8610
Device IntName : Y530-U051
Device Version : 4.3
CU_SWVer : HUAWEI
Device Compile : 7/18/2014 8:44:17 AM
Device ExtInfo : HUAWEI Y530-U051
Load Ok!

Operation : Flash [ v1.14 ]
ForceFlashing : Disabled

Verify FW package ...
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 0A254D65
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 6282F806B13D2A2502779986411898B0
ID_BLOCK_L : FC973990850CBE37CA256EA7AD405E7D
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!

Flash Chain : 27
Flashing now

Flashing : gpt_main0.bin
Flashing : sbl1.mbn
Flashing : deploy.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : emmc_appsboot.mbn
Flashing : NON-HLOS.bin
Flashing : persist.img
Flashing : boot.img
Flashing : recovery.img
Flashing : cust.img
Flashing : cache.img
Flashing : misc.img
Flashing : system.img
Flashing : userdata.img
Flashing : gpt_backup0.bin
Wipe data ...

BootConfig set to 0x00

Flashing done!

Done!
Elapsed: 00:03:50

Reconnect Power/Cable!

Tasted By- As Milon

rajufzr · 06-22-2017, 06:20

pls share modified firmware for this fone.

sumon_tele · 06-22-2017, 06:28

As Milon bhi
all time good post
ple...........share file

thanks

alyas_ashiq · 11-14-2017, 10:36

Plz Guide Ho To Connect Phone in Qload Mode

bcoz When i press Volum Button & Insert USB Cable Phone Automatic Turn On

Also Use EDL Cable Butt Both Method Not Working

**>>Gsmmilon>>** · 11-14-2017, 11:20

Quote:

Plz Guide Ho To Connect Phone in Qload Mode

bcoz When i press Volum Button & Insert USB Cable Phone Automatic Turn On

Also Use EDL Cable Butt Both Method Not Working

try CMD Comand ,

1st : fastboot reboot edl
2nd : adb reboot edl

**>>Gsmmilon>>** · 11-14-2017, 11:20

Quote:

Plz Guide Ho To Connect Phone in Qload Mode

bcoz When i press Volum Button & Insert USB Cable Phone Automatic Turn On

Also Use EDL Cable Butt Both Method Not Working

try CMD Comand ,

1st : fastboot reboot edl
2nd : adb reboot edl

**>>Gsmmilon>>** · 11-14-2017, 11:21

Quote:

Plz Guide Ho To Connect Phone in Qload Mode

bcoz When i press Volum Button & Insert USB Cable Phone Automatic Turn On

Also Use EDL Cable Butt Both Method Not Working

Try Also MI EDL Cable

**Brka** · 11-14-2017, 22:40

EDL cables don't work on Y530.

two things work :

1. from recovery - adb reboot edl
2. testpoint.

b.r
Alex

11-14-2017, 22:40	#8 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,206 Member: 163 Status: Offline Thanks Meter: 7,785	EDL cables don't work on Y530. two things work : 1. from recovery - adb reboot edl 2. testpoint. b.r Alex __________________ Always press THANKS button if my post was helpful! Please DO NOT send me PM's for help, You can ask for help on forum Do not post THANKS posts - use thanks button ! ALWAYS use SEARCH button before posting!

06-22-2017, 06:20	#2 (permalink)
rajufzr No Life Poster Join Date: Feb 2005 Location: MX-KEY is the BEST NOKIA TOOL Age: 50 Posts: 875 Member: 116314 Status: Offline Thanks Meter: 147	pls share modified firmware for this fone.

06-22-2017, 06:28	#3 (permalink)
sumon_tele Freak Poster Join Date: Jun 2013 Location: gafargaon.mymensing.bangladesh Posts: 228 Member: 1960103 Status: Offline Sonork: 100.1651089 Thanks Meter: 49	As Milon bhi all time good post ple...........share file thanks

11-14-2017, 10:36	#4 (permalink)
alyas_ashiq Freak Poster Join Date: Sep 2009 Location: GUJRANWALA Age: 32 Posts: 309 Member: 1112242 Status: Offline Sonork: 100.1617813 Thanks Meter: 126	Plz Guide Ho To Connect Phone in Qload Mode bcoz When i press Volum Button & Insert USB Cable Phone Automatic Turn On Also Use EDL Cable Butt Both Method Not Working