HUAYU D88 Can't format. - GSM-Forum

rajumobile · 04-19-2008, 19:25

Pin finder detected but cant format
Here is log.

software version: 1.07
cable type: 2x6 (L12B)
platform: MT6205, MT6217-MT6228
searching adapter at COM3...
adapter found, version: 2000
pins: 12, reversed !
power cycles: 1
activation cycles: 7
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
19200 fixed
CPU: MT6226
result: Rx:2 Tx:9
time required: 11 sec
Power On !

COM3 [VCP0] selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:9932:C581
Connecting, wait...
error: can't finalize test mode
repeat operation and HOLD phone "Power" button long time !
error: operation failed !

InfinityHelp · 04-19-2008, 21:27

hello!

make format in Complete mode

rajumobile · 04-20-2008, 04:03

Format complete solve the restart problem but Mic and Ear phone speaker not working, might be there some hardware fault, will check it.

Thanks for support.

04-19-2008, 19:25	#1 (permalink)
rajumobile No Life Poster Join Date: Feb 2004 Age: 52 Posts: 593 Member: 54993 Status: Offline Thanks Meter: 47	HUAYU D88 Can't format. Pin finder detected but cant format Here is log. software version: 1.07 cable type: 2x6 (L12B) platform: MT6205, MT6217-MT6228 searching adapter at COM3... adapter found, version: 2000 pins: 12, reversed ! power cycles: 1 activation cycles: 7 power-off delay: 20 start Rx/Tx: 1/1 Loading configuration... Initializing... Press and HOLD phone Power button now ! detecting pins... 19200 fixed CPU: MT6226 result: Rx:2 Tx:9 time required: 11 sec Power On ! COM3 [VCP0] selected Action: reset settings Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing[6226:8A02:8A01]... CPU: MT6226 high speed boot disabled chip: 0031:9932:C581 Connecting, wait... error: can't finalize test mode repeat operation and HOLD phone "Power" button long time ! error: operation failed !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6600 Can't format Contact Retailer	bop_gsm	Nokia Hardware & Hardware Repair	29	06-07-2007 23:52
Can't format MMC in 3230	Nikil	WD2 & APE (Symbian Phones)	4	08-21-2005 14:57
can't format mmc	waleedy	Nokia Multimedia	4	11-09-2004 12:19

04-19-2008, 21:27	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! make format in Complete mode

04-20-2008, 04:03	#3 (permalink)
rajumobile No Life Poster Join Date: Feb 2004 Age: 52 Posts: 593 Member: 54993 Status: Offline Thanks Meter: 47	Format complete solve the restart problem but Mic and Ear phone speaker not working, might be there some hardware fault, will check it. Thanks for support.