Hutch USHA-LEXUS UL2104 UNLOCK? - Page 2 - GSM-Forum

sallupat · 02-26-2008, 13:20

its very strange that u wrote same words in reply to me & also u put your commnets on this forum also.
i told that is any mistake do not made by any of this member in his life???
I m also member since last three years with nearly 600 posts & i also know that there is always serious matter discussed on forum
salim

akhil_bbsr · 02-26-2008, 13:38

Dear@ Sallu Reflash It And Write Eeprom/ffs And Unlock It

**InfinitySupport** · 02-26-2008, 13:51

Hello,

it's very strange that phone can't be unlocked.

What to do in case of problems:
1. flash phone with firmware from support area
2. write original eeprom into phone (if you have it)
3. make sp-unlock in "standard" mode (and follow special instruction exactly) !
4. if still no luck (that near impossible) make "format ffs" in complete mode
5. power-on phone
6. power-off phone
7. make sp-unlock in "standard" mode (and follow special instruction exactly) !

anil2006 · 02-29-2008, 07:23

COM2 selectedDevice: Hutch Usha-LaxusChecking data, wait...advanced flash detection enabledeeprom backup enabled, it may takes several minutes !Action: write NOR flash"smart write" active"format ffs" activeskip: Firmwareskip: Customization/Language Packskip: Customizationwrite: Eeprom/ffsBoot...Press and HOLD Power button now !19200Connecting, wait...Initializing[6205:8B00]...CPU: MT6205boot step size: 0400Release Power button now !Boot DoneInitialize...detecting chip #00 in region #00...flash: DA2213DD00DD02:18E59F00000000flash: DA2213DD00DD02:18E59F00000000flash: Winbond T 4Mbnumber of flash chip/regions detected: 01/01Initialize DoneSet baud...921600Set baud DoneIdentification...detect device identification#1...detection phase #1....detection phase #2..........detect device identification#1 finishedidentification#1 protocol ver: 02ver. sw1: FW01_PCB01_GSM_MT6205B_DN.1_06.BINver. sw2: 1.06, 00000000ffs offset/size: 00300000/000F0000detect device identification#2...detection phase #1....warning: optional information not founddetect device identification#2 finishedreading [eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]]...file saved: E:\Program Files\InfinityBox\MModule\backup_eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]_20080229-110646.B0E.binIdentification DoneManipulation...Manipulation DoneFinalization...Finalization DoneWrite...Area: Eeprom/ffsflash: DA2213DD00DD02:18E59F00000000flash: DA2213DD00DD02:18E59F00000000Write: Eeprom/ffsdetect device identification#2...detection phase #1....warning: optional information not founddetect device identification#2 finishedformatting...flash: DA2213DD00DD02:18E59F00000000flash: DA2213DD00DD02:18E59F00000000Write DoneFinished, time used: 62 secRemove/Install battery now !

anil2006 · 02-29-2008, 07:24

COM2 selectedDevice: Hutch Usha-LaxusChecking data, wait...advanced flash detection enabledeeprom backup enabled, it may takes several minutes !Action: unlockWarning ! After unlock process finished make this:1. be sure that there is NO any SIM card in phone2. press phone "Power" button and power-On phone3. press phone "Power" button and power-Off phone4. NOTE ! SIM card can be blocked during first power-On so use SIM cardthat you ready to move to trash w/o problems !5. now you can power-On phone with SIM cardDo you understand instruction and want to continue ?unlock method: standardBoot...Press and HOLD Power button now !19200Connecting, wait...Initializing[6205:8B00]...CPU: MT6205boot step size: 0400Release Power button now !Boot DoneInitialize...detecting chip #00 in region #00...flash: DA2213DD00DD02:18E59F00000000flash: DA2213DD00DD02:18E59F00000000flash: Winbond T 4Mbnumber of flash chip/regions detected: 01/01Initialize DoneSet baud...921600Set baud DoneIdentification...detect device identification#1...detection phase #1....detection phase #2..........detect device identification#1 finishedidentification#1 protocol ver: 02ver. sw1: FW01_PCB01_GSM_MT6205B_DN.1_06.BINver. sw2: 1.06, 00000000ffs offset/size: 00300000/000F0000detect device identification#2...detection phase #1....warning: optional information not founddetect device identification#2 finishedreading [eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]]...file saved: E:\Program Files\InfinityBox\MModule\backup_eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]_20080229-110223.B0E.binflash: DA2213DD00DD02:18E59F00000000flash: DA2213DD00DD02:18E59F00000000Identification DoneManipulation...detection procedure, wait...error: phone is not locked or unknown eepromdetection procedure, wait...error: phone is not locked or unknown eepromManipulation FailFinished, time used: 49 secRemove/Install battery now !

anil2006 · 02-29-2008, 07:26

COM2 selectedAction: reset settingsModel: Hutch Usha-LaxusChecking data, wait...Phone should be Switched OFF !Press and HOLD Power button now !19200 autodetectInitializing[6205:8B00]...CPU: MT6205Connecting, wait...error: can't finalize test moderepeat operation and HOLD phone "Power" button long time !error: operation failed !Finished, time used: 124 secRemove/Install battery now !

anil2006 · 02-29-2008, 07:59

aftar flash pro?COM2 selectedDevice: Hutch Usha-LaxusChecking data, wait...advanced flash detection enabledeeprom backup enabled, it may takes several minutes !Action: write NOR flash"smart write" active"format ffs" activewrite: Firmwareskip: Customization/Language Packskip: Customizationwrite: Eeprom/ffsBoot...Press and HOLD Power button now !19200Connecting, wait...Initializing[6205:8B00]...CPU: MT6205boot step size: 0400Release Power button now !Boot DoneInitialize...detecting chip #00 in region #00...flash: DA2213DD00DD02:18E59F00000000flash: DA2213DD00DD02:18E59F00000000flash: Winbond T 4Mbnumber of flash chip/regions detected: 01/01Initialize DoneSet baud...921600Set baud DoneIdentification...detect device identification#1...detection phase #1....detection phase #2..........detect device identification#1 finishedidentification#1 protocol ver: 02ver. sw1: FW01_PCB01_GSM_MT6205B_DN.1_06.BINver. sw2: 1.06, 00000000ffs offset/size: 00300000/000F0000detect device identification#2...detection phase #1....warning: optional information not founddetect device identification#2 finishedreading [eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]]...file saved: E:\Program Files\InfinityBox\MModule\backup_eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]_20080229-114832.B0E.binIdentification DoneManipulation...Manipulation DoneFinalization...Finalization DoneWrite...Area: Firmwareerror: no any expected answererror: no any expected answer: wrong answer after chip id requesterror: no any expected answererror: no any expected answererror: no any expected answer: wrong answer after chip cfi requesterror: no any expected answererror: no any expected answer: wrong answer after chip id requestdetect device identification#2...detection phase #1...error: unexpected termination/freez: 00000000warning: optional information not founddetect device identification#2 finishedWrite FailFinished, time used: 63 secRemove/Install battery now !

**InfinitySupport** · 02-29-2008, 10:15

Hello,

Please, follow this more detailed instruction exactly like described.
It's very important to make all steps !
Please, post all results in one messagem, no need to write each step results in separate message.

What to do in case of problems:
1. Charge phone battery completely (use extrnal power supply)
2. flash phone with firmware from support area
3. write original eeprom into phone (if you have it)
4. make sp-unlock in "standard" mode and follow special instruction (given by software) exactly !
5. if still no luck (that near impossible) make "format ffs" in complete mode
6. power-on phone
7. power-off phone b phone "Power" button, don't remove battery !
8. make sp-unlock in "standard" mode (and follow special instruction exactly) !

Chandreshswami · 01-10-2009, 14:50

Quote:

Originally Posted by InfinitySupport

Hello,

Please, follow this more detailed instruction exactly like described.
It's very important to make all steps !
Please, post all results in one messagem, no need to write each step results in separate message.

What to do in case of problems:
1. Charge phone battery completely (use extrnal power supply)
2. flash phone with firmware from support area
3. write original eeprom into phone (if you have it)
4. make sp-unlock in "standard" mode and follow special instruction (given by software) exactly !
5. if still no luck (that near impossible) make "format ffs" in complete mode
6. power-on phone
7. power-off phone b phone "Power" button, don't remove battery !
8. make sp-unlock in "standard" mode (and follow special instruction exactly) !

i also can not unlock usha lexus with infinity
tried all possible options not work for me

check attached log file

ALSO WAITING FOR SPICE S525

THANKS

Chandresh

**InfinitySupport** · 01-10-2009, 17:54

Hello,

What is usha-lexus model name exactly ?
Please, send information from phone back label and full flash backup to [email protected]

Chandreshswami · 01-12-2009, 12:06

Quote:

Originally Posted by InfinitySupport

Hello,

What is usha-lexus model name exactly ?
Please, send information from phone back label and full flash backup to [email protected]

model Name Usha Lexus UL2104

firmware is similar as on support area

**InfinitySupport** · 01-12-2009, 19:22

Hello,

Please, send information from phone back label and full flash backup to [email protected]

Also you can make this:
1. make full flash backup for emergency case
2. flash phone with firmware from support area
3. make "unlock" operation again

Chandreshswami · 01-16-2009, 11:45

Quote:

Originally Posted by InfinitySupport

Hello,

Please, send information from phone back label and full flash backup to [email protected]

Also you can make this:
1. make full flash backup for emergency case
2. flash phone with firmware from support area
3. make "unlock" operation again

Sir
check attached log file
i have already flash with support files and try to unlock but still unable to unlock

jignesh269 · 06-28-2010, 12:38

same problem hire
hire i attech backup file and log

RapidShare: 1-CLICK Web hosting - Easy Filehosting

YellowBoss · 06-28-2010, 16:43

Warning ! After unlock process finished make this:

1. be sure that there is NO any SIM card in phone
2. press phone "Power" button and power-On phone
3. press phone "Power" button and power-Off phone
4. NOTE ! SIM card can be blocked during first power-On so use SIM card
that you ready to move to trash w/o problems !
5. now you can power-On phone with SIM card

Do you understand instruction and want to continue ?

02-29-2008, 07:23	#19 (permalink)
anil2006 Freak Poster Join Date: Jun 2006 Posts: 169 Member: 295635 Status: Offline Thanks Meter: 18	Eeprom Write? COM2 selectedDevice: Hutch Usha-LaxusChecking data, wait...advanced flash detection enabledeeprom backup enabled, it may takes several minutes !Action: write NOR flash"smart write" active"format ffs" activeskip: Firmwareskip: Customization/Language Packskip: Customizationwrite: Eeprom/ffsBoot...Press and HOLD Power button now !19200Connecting, wait...Initializing[6205:8B00]...CPU: MT6205boot step size: 0400Release Power button now !Boot DoneInitialize...detecting chip #00 in region #00...flash: DA2213DD00DD02:18E59F00000000flash: DA2213DD00DD02:18E59F00000000flash: Winbond T 4Mbnumber of flash chip/regions detected: 01/01Initialize DoneSet baud...921600Set baud DoneIdentification...detect device identification#1...detection phase #1....detection phase #2..........detect device identification#1 finishedidentification#1 protocol ver: 02ver. sw1: FW01_PCB01_GSM_MT6205B_DN.1_06.BINver. sw2: 1.06, 00000000ffs offset/size: 00300000/000F0000detect device identification#2...detection phase #1....warning: optional information not founddetect device identification#2 finishedreading [eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]]...file saved: E:\Program Files\InfinityBox\MModule\backup_eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]_20080229-110646.B0E.binIdentification DoneManipulation...Manipulation DoneFinalization...Finalization DoneWrite...Area: Eeprom/ffsflash: DA2213DD00DD02:18E59F00000000flash: DA2213DD00DD02:18E59F00000000Write: Eeprom/ffsdetect device identification#2...detection phase #1....warning: optional information not founddetect device identification#2 finishedformatting...flash: DA2213DD00DD02:18E59F00000000flash: DA2213DD00DD02:18E59F00000000Write DoneFinished, time used: 62 secRemove/Install battery now !

02-29-2008, 07:24	#20 (permalink)
anil2006 Freak Poster Join Date: Jun 2006 Posts: 169 Member: 295635 Status: Offline Thanks Meter: 18	SP-unlock in "standard" mode error? COM2 selectedDevice: Hutch Usha-LaxusChecking data, wait...advanced flash detection enabledeeprom backup enabled, it may takes several minutes !Action: unlockWarning ! After unlock process finished make this:1. be sure that there is NO any SIM card in phone2. press phone "Power" button and power-On phone3. press phone "Power" button and power-Off phone4. NOTE ! SIM card can be blocked during first power-On so use SIM cardthat you ready to move to trash w/o problems !5. now you can power-On phone with SIM cardDo you understand instruction and want to continue ?unlock method: standardBoot...Press and HOLD Power button now !19200Connecting, wait...Initializing[6205:8B00]...CPU: MT6205boot step size: 0400Release Power button now !Boot DoneInitialize...detecting chip #00 in region #00...flash: DA2213DD00DD02:18E59F00000000flash: DA2213DD00DD02:18E59F00000000flash: Winbond T 4Mbnumber of flash chip/regions detected: 01/01Initialize DoneSet baud...921600Set baud DoneIdentification...detect device identification#1...detection phase #1....detection phase #2..........detect device identification#1 finishedidentification#1 protocol ver: 02ver. sw1: FW01_PCB01_GSM_MT6205B_DN.1_06.BINver. sw2: 1.06, 00000000ffs offset/size: 00300000/000F0000detect device identification#2...detection phase #1....warning: optional information not founddetect device identification#2 finishedreading [eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]]...file saved: E:\Program Files\InfinityBox\MModule\backup_eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]_20080229-110223.B0E.binflash: DA2213DD00DD02:18E59F00000000flash: DA2213DD00DD02:18E59F00000000Identification DoneManipulation...detection procedure, wait...error: phone is not locked or unknown eepromdetection procedure, wait...error: phone is not locked or unknown eepromManipulation FailFinished, time used: 49 secRemove/Install battery now !

02-29-2008, 07:26	#21 (permalink)
anil2006 Freak Poster Join Date: Jun 2006 Posts: 169 Member: 295635 Status: Offline Thanks Meter: 18	Format ffs error? COM2 selectedAction: reset settingsModel: Hutch Usha-LaxusChecking data, wait...Phone should be Switched OFF !Press and HOLD Power button now !19200 autodetectInitializing[6205:8B00]...CPU: MT6205Connecting, wait...error: can't finalize test moderepeat operation and HOLD phone "Power" button long time !error: operation failed !Finished, time used: 124 secRemove/Install battery now !

02-29-2008, 07:59	#22 (permalink)
anil2006 Freak Poster Join Date: Jun 2006 Posts: 169 Member: 295635 Status: Offline Thanks Meter: 18	total proced aftar no power on? aftar flash pro?COM2 selectedDevice: Hutch Usha-LaxusChecking data, wait...advanced flash detection enabledeeprom backup enabled, it may takes several minutes !Action: write NOR flash"smart write" active"format ffs" activewrite: Firmwareskip: Customization/Language Packskip: Customizationwrite: Eeprom/ffsBoot...Press and HOLD Power button now !19200Connecting, wait...Initializing[6205:8B00]...CPU: MT6205boot step size: 0400Release Power button now !Boot DoneInitialize...detecting chip #00 in region #00...flash: DA2213DD00DD02:18E59F00000000flash: DA2213DD00DD02:18E59F00000000flash: Winbond T 4Mbnumber of flash chip/regions detected: 01/01Initialize DoneSet baud...921600Set baud DoneIdentification...detect device identification#1...detection phase #1....detection phase #2..........detect device identification#1 finishedidentification#1 protocol ver: 02ver. sw1: FW01_PCB01_GSM_MT6205B_DN.1_06.BINver. sw2: 1.06, 00000000ffs offset/size: 00300000/000F0000detect device identification#2...detection phase #1....warning: optional information not founddetect device identification#2 finishedreading [eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]]...file saved: E:\Program Files\InfinityBox\MModule\backup_eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]_20080229-114832.B0E.binIdentification DoneManipulation...Manipulation DoneFinalization...Finalization DoneWrite...Area: Firmwareerror: no any expected answererror: no any expected answer: wrong answer after chip id requesterror: no any expected answererror: no any expected answererror: no any expected answer: wrong answer after chip cfi requesterror: no any expected answererror: no any expected answer: wrong answer after chip id requestdetect device identification#2...detection phase #1...error: unexpected termination/freez: 00000000warning: optional information not founddetect device identification#2 finishedWrite FailFinished, time used: 63 secRemove/Install battery now !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
USHA-LEXUS format success with ET	broken_arrow	ET-BoX	8	03-10-2009 14:01
usha-lexus flash need	arjjun	Infinity-Box	17	10-06-2008 20:24
usha-lexus pinout need	rajeshbahri	Infinity-Box	9	09-09-2008 09:26
Usha Lexus Connet Ok With Spiderman	sahil2000ind	SpiderMan	1	08-09-2008 18:53

02-26-2008, 13:20	#16 (permalink)
sallupat No Life Poster Join Date: Apr 2005 Age: 46 Posts: 911 Member: 138982 Status: Offline Thanks Meter: 138	its very strange that u wrote same words in reply to me & also u put your commnets on this forum also. i told that is any mistake do not made by any of this member in his life??? I m also member since last three years with nearly 600 posts & i also know that there is always serious matter discussed on forum salim

02-26-2008, 13:38	#17 (permalink)
akhil_bbsr No Life Poster Join Date: May 2006 Location: MOBILE SOFTZONE BHUBANESWAR IN Posts: 3,509 Member: 271478 Status: Offline Sonork: 1590868 Thanks Meter: 1,070	Dear@ Sallu Reflash It And Write Eeprom/ffs And Unlock It

02-26-2008, 13:51	#18 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, it's very strange that phone can't be unlocked. What to do in case of problems: 1. flash phone with firmware from support area 2. write original eeprom into phone (if you have it) 3. make sp-unlock in "standard" mode (and follow special instruction exactly) ! 4. if still no luck (that near impossible) make "format ffs" in complete mode 5. power-on phone 6. power-off phone 7. make sp-unlock in "standard" mode (and follow special instruction exactly) !

02-29-2008, 10:15	#23 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, Please, follow this more detailed instruction exactly like described. It's very important to make all steps ! Please, post all results in one messagem, no need to write each step results in separate message. What to do in case of problems: 1. Charge phone battery completely (use extrnal power supply) 2. flash phone with firmware from support area 3. write original eeprom into phone (if you have it) 4. make sp-unlock in "standard" mode and follow special instruction (given by software) exactly ! 5. if still no luck (that near impossible) make "format ffs" in complete mode 6. power-on phone 7. power-off phone b phone "Power" button, don't remove battery ! 8. make sp-unlock in "standard" mode (and follow special instruction exactly) !

01-10-2009, 17:54	#25 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, What is usha-lexus model name exactly ? Please, send information from phone back label and full flash backup to [email protected]

01-12-2009, 19:22	#27 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, Please, send information from phone back label and full flash backup to [email protected] Also you can make this: 1. make full flash backup for emergency case 2. flash phone with firmware from support area 3. make "unlock" operation again

06-28-2010, 16:43	#30 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,476 Member: 1043909 Status: Offline Thanks Meter: 60,926	Warning ! After unlock process finished make this: 1. be sure that there is NO any SIM card in phone 2. press phone "Power" button and power-On phone 3. press phone "Power" button and power-Off phone 4. NOTE ! SIM card can be blocked during first power-On so use SIM card that you ready to move to trash w/o problems ! 5. now you can power-On phone with SIM card Do you understand instruction and want to continue ?