GSM-Forum - i9190 nand format ok

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)

- - i9190 nand format ok (https://forum.gsmhosting.com/vbb/f296/i9190-nand-format-ok-2071908/)

i9190 nand format ok

Code:

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6571

BB_CPU_NME : [MediaTek] MT6571_S00

BB_CPU_EXT : 0xCA00 , 0x8D00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with SPRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x8B

NAND Flash : 002C00BC009000550056000000000000

eMMC Flash : NOT INSTALLED

Initialize Memory ... 

DRAM already initialized by Preloader

NAND FlashIC initialized

[NAND] : FLASH_VEN : 0x0090 , [Micron] MT29C4G96MAZAPCJA_5IT

[NAND] : FLASH_DIE : 002C 00BC 0090 0055 0056 0000 0000

[NAND] : FLASH_LEN : 0x20000000

[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2

DEV RID    : 96DD5583DDB91928C0B5E79E3FCE7B83

INT RAM    : 0x00020000

EXT RAM    : 0x10000000

BOOT TYPE  : NAND_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 

[AP] : Initial info read Ok!
 

Brand     : samsung

ProdName  : serrano3g

ProdModel : GT-I9190

Device    : serrano3g

AndroidVer: 4.2.2

MTKxCPU   : MT6571

MTKxPRJ   : ALPS.JB7.MP.V1.14
 

Done!

Elapsed: 00:00:15

Reconnect Power/Cable!
 
 

Operation : Format FileSystem [ v1.44 ]
 

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6571

BB_CPU_NME : [MediaTek] MT6571_S00

BB_CPU_EXT : 0xCA00 , 0x8D00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with SPRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x8B

NAND Flash : 002C00BC009000550056000000000000

eMMC Flash : NOT INSTALLED

Initialize Memory ... 

DRAM already initialized by Preloader

NAND FlashIC initialized

[NAND] : FLASH_VEN : 0x0090 , [Micron] MT29C4G96MAZAPCJA_5IT

[NAND] : FLASH_DIE : 002C 00BC 0090 0055 0056 0000 0000

[NAND] : FLASH_LEN : 0x20000000

[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2

DEV RID    : 96DD5583DDB91928C0B5E79E3FCE7B83

INT RAM    : 0x00020000

EXT RAM    : 0x10000000

BOOT TYPE  : NAND_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 
 

Clear USERDATA

Clear Ok!

Clear CACHE

Clear Ok!
 

Done!

Elapsed: 00:00:13

Reconnect Power/Cable!

You can change settings : Settings -> Other -> NAND init Mode

alive but still freez on logo

Code:

Operation : Check / Read Info [ v1.44 ]
 

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6571

BB_CPU_NME : [MediaTek] MT6571_S00

BB_CPU_EXT : 0xCA00 , 0x8D00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with SPRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x8B

NAND Flash : 002C00BC009000550056000000000000

eMMC Flash : NOT INSTALLED

Initialize Memory ... 

DRAM already initialized by Preloader

NAND FlashIC initialized

[NAND] : FLASH_VEN : 0x0090 , [Micron] MT29C4G96MAZAPCJA_5IT

[NAND] : FLASH_DIE : 002C 00BC 0090 0055 0056 0000 0000

[NAND] : FLASH_LEN : 0x20000000

[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2

DEV RID    : 96DD5583DDB91928C0B5E79E3FCE7B83

INT RAM    : 0x00020000

EXT RAM    : 0x10000000

BOOT TYPE  : NAND_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 

[AP] : Initial info read Ok!
 

Brand     : samsung

ProdName  : serrano3g

ProdModel : GT-I9190

Device    : serrano3g

AndroidVer: 4.2.2

MTKxCPU   : MT6571

MTKxPRJ   : ALPS.JB7.MP.V1.14
 

SECURITY : 

IMEI_SW [1] : 359883006313585

BTMAC Addr  : 000046657101

WiFi MAC    : 000000000000
 

Done!

Elapsed: 00:00:15

Reconnect Power/Cable!
 
 

Operation : Format FileSystem [ v1.44 ]
 

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6571

BB_CPU_NME : [MediaTek] MT6571_S00

BB_CPU_EXT : 0xCA00 , 0x8D00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with SPRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x8B

NAND Flash : 002C00BC009000550056000000000000

eMMC Flash : NOT INSTALLED

Initialize Memory ... 

DRAM already initialized by Preloader

NAND FlashIC initialized

[NAND] : FLASH_VEN : 0x0090 , [Micron] MT29C4G96MAZAPCJA_5IT

[NAND] : FLASH_DIE : 002C 00BC 0090 0055 0056 0000 0000

[NAND] : FLASH_LEN : 0x20000000

[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2

DEV RID    : 96DD5583DDB91928C0B5E79E3FCE7B83

INT RAM    : 0x00020000

EXT RAM    : 0x10000000

BOOT TYPE  : NAND_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 
 

Clear USERDATA

Clear Ok!

Clear CACHE

Clear Ok!
 

Done!

Elapsed: 00:00:17

Reconnect Power/Cable!
 
 

Operation : Repair Security [ v1.44 ]
 

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 4 ]

Sync...

Init Ok, waiting for phone ...

Reading initial info, wait... 

Phone Info : 

BB : MT6571, E00

HW : CENON71_ET_JB7_GPRS_HW

SW : MOLY.WR8.W1315.MD.WG.MP.V38

MM : 2000.00.00

VR : 1.0

SN : 0107E10303141103022801011405709331671361647020625_092830    10

Security Info : 

IMEI [1] : 359883006313585

IMEI [2] : Damaged or not exists

Read Ok!

Update IMEI[1] to : 359883006313585 done!
 

Done!

Elapsed: 00:01:04

Reconnect Power/Cable!

Team should improve nand format and read info i successfully used to read and write firmware. but same phone was unable to format. even selected all nand p1,p2 etc.

@asadnow2k
the same issue like u bro

There is nothing improve. If format not helped - need seek FW. Nothing more will help.