GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)
-   -   INFI TEAM plz! support CPU MT 4007! thanks alots (https://forum.gsmhosting.com/vbb/f296/infi-team-plz-support-cpu-mt-4007-thanks-alots-956122/)

duyphuong3000 03-19-2010 16:43
INFI TEAM plz! support CPU MT 4007! thanks alots
 
Quote:
COM16 [VCP0] selected
module v3.10
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: reset settings ("format ffs")
Do you want to make ffs/eeprom backup before format ?
ffs/eeprom backup enabled, it may takes several minutes !
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [4007:4007]...
CPU: MT4007
high speed boot On
error: hardware is not supported: [00004007:00004007]
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 3 sec
Remove/Install battery now !
INFI TEAM plz! support CPU MT 4007! thanks alots...

YellowBoss 03-20-2010 20:04
Hello,

Please, open phone and post here what is CPU chip name.

duyphuong3000 03-21-2010 09:23
Quote:
Originally Posted by YellowBoss (Post 5601275)
Hello,

Please, open phone and post here what is CPU chip name.
When i openned my phone MALATA K6, i saw CPU chip 6225A but when i scan pinout it was show Chip 6225A but when i reset user code or flash by infinity box it was show CPU MT4007! What's problem, infi team?
Code:
COM16 [VCP0] selected
module  v3.11
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "user code"
unlock method: standard fast
====>  Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [4007:4007]...
CPU: MT4007
high speed boot On
error: hardware is not supported: [00004007:00004007]
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 2 sec
Remove/Install battery now !

YellowBoss 03-21-2010 14:32
Quote:
Originally Posted by duyphuong3000 (Post 5602889)
When i openned my phone MALATA K6, i saw CPU chip 6225A but when i scan pinout it was show Chip 6225A but when i reset user code or flash by infinity box it was show CPU MT4007! What's problem, infi team?
Code:
COM16 [VCP0] selected
module  v3.11
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "user code"
unlock method: standard fast
====>  Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [4007:4007]...
CPU: MT4007
high speed boot On
error: hardware is not supported: [00004007:00004007]
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 2 sec
Remove/Install battery now !
Problem is with cable.
Double check that you have connected cable to phone well, be sure that you have connected GND wire well too.


All times are GMT +1. The time now is 19:09.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.09767 seconds with 6 queries

SEO by vBSEO